Drum filter accessories

This flushing pump in drum filters and  is equipped with a stainless steel pump housing and multi-stage pump drive. Sand-proof up to 50 g/m³ water. With integrated non-return valve, 5 m connection cable and 21 m drain cable. The small outer diameter of only 9.6 cm allows use in narrow drilled wells from a Ø of 10 cm. For pumping water from great depths and transferring it at high pressure. The flow rate of a pump depends mainly on the delivery head. The term 'head' refers to the difference in height between the water surface and the water intake. The table above shows the performance of the flushing pump at different heads. For example, at a delivery head of 20 metres, this pump can be expected to deliver 2,100 litres per hour.

The TIP GP3000 is ideally suited as a flushing pump in drum filters and is equipped with high-quality stainless steel pump housing. It is a self-priming pump with jet hydraulic system and on/off switch. It is equipped with a maintenance-free condenser motor with thermal overload protection. Flexible locations The TIP GP3000 IS suitable for both mobile use and fixed installation. Wide range of applications  The TIP GP3000 is not only used in the drum filter sector, but is also suitable, for example, for watering or sprinkling gardens, filling and emptying basins or storage tanks, cleaning terraces and pavements. Delivery rate and delivery head 40 m - 150 l/h30 m - 600 l/h20 m - 1,200 l/h10 m - 2,400 l/h The flow rate of a pump depends mainly on the delivery head. The term 'head' refers to the difference in height between the water surface and the water intake. The table above shows the performance of the TIP GP3000 at different heads. For example, at a head of 10 metres, this pump can be expected to deliver 2,400 litres per hour. Maximum number of sprinklers Garden pumps are very suitable for operating irrigation systems - such as sprinklers. This model is suitable for connecting a maximum of 1 sprinkler. This specification is based on the following standard values: Water flow at sprinkler: approx. 600 l/h. Water pressure at sprinkler: approx. 2 bar. Suction height: max. 5 m. The term 'suction height' refers to the difference in height between the water surface and the pump.

- This UVC model ensures crystal clear water.Sophisticated design and high-quality materials result in high UV-C radiation with a wavelength of exactly 253.7 nm. The high dose of radiation destroys almost all bacteria, viruses and even mould, ensuring clear, clean and healthy water.  This is a spare parts set (NEW GOODS) Included in delivery are: UV lamp, quartz glass, ballast, stainless steel connectors, instructions   The unit is delivered WITHOUT plug. Attention! Important safety instructions!  These UV-C lamps do NOT comply with the applicable DIN standards! Therefore the kit is delivered without plug. It must be installed by an experienced and recognised specialist company in accordance with DIN EN60335. Standard protective accessories (safety goggles, gloves, etc.) must be worn during installation, assembly and commissioning. These accessories are NOT included in the kit. Always have the installation carried out by a certified specialist company. UV-C radiation is dangerous to humans and animals and can damage the skin and/or eyes! Switch off the unit before approaching it! Submersible UV-C lamps must always be completely submerged in water! The seller is not fully liable for any damage caused by improper assembly, improper commissioning or improper operation, but the customer or the installer. Installation or operating instructions are enclosed with the delivery!

- This product is only suitable for professional use. - This is only a spare parts set. The scope of delivery includes: UV lamp, quartz glass, ballast unit The unit is supplied WITHOUT plug. Attention! Important safety instructions!  These UV-C - XClear UVC - AquaForte - Submersible UVC lamps do NOT comply with the applicable DIN standards! Therefore the kit is delivered without plug. It must be installed by an experienced and recognised specialist company in accordance with DIN EN60335. Standard protective accessories (safety goggles, gloves, etc.) must be worn during installation, assembly and commissioning. These accessories are NOT included in the kit. Always have the installation carried out by a certified specialist company. UV-C radiation is dangerous for humans and animals and can damage the skin and/or eyes! Switch off the unit before approaching it! Submersible UV-C lamps must always be completely submerged in water! The seller is not fully liable for any damage caused by improper assembly, improper commissioning or improper operation, but the customer or the installer. Installation or operating instructions are NOT enclosed with the delivery!

- This UVC model ensures crystal clear water.Sophisticated design and high-quality materials result in high UV-C radiation with a wavelength of exactly 253.7 nm. The high dose of radiation destroys almost all bacteria, viruses and even mould, ensuring clear, clean and healthy water.  This is a spare parts set (NEW GOODS) Included in delivery are: UV lamp, quartz glass, ballast, stainless steel connectors, instructions   The unit is delivered WITHOUT plug. Attention! Important safety instructions!  These UV-C lamps do NOT comply with the applicable DIN standards! Therefore the kit is delivered without plug. It must be installed by an experienced and recognised specialist company in accordance with DIN EN60335. Standard protective accessories (safety goggles, gloves, etc.) must be worn during installation, assembly and commissioning. These accessories are NOT included in the kit. Always have the installation carried out by a certified specialist company. UV-C radiation is dangerous to humans and animals and can damage the skin and/or eyes! Switch off the unit before approaching it! Submersible UV-C lamps must always be completely submerged in water! The seller is not fully liable for any damage caused by improper assembly, improper commissioning or improper operation, but the customer or the installer. Installation or operating instructions are enclosed with the delivery!

- This product is only suitable for professional use. - it  is a spare parts set Included in delivery are: UV lamp, quartz glass, ballast unit, threaded bushing with AG The unit is supplied WITHOUT plug. Attention! Important safety instructions!  These UV-C - XClear UVC - AquaForte - Submersible UVC lamps do NOT comply with the applicable DIN standards! Therefore the kit is delivered without plug. It must be installed by an experienced and recognised specialist company in accordance with DIN EN60335. Standard protective accessories (safety goggles, gloves, etc.) must be worn during installation, assembly and commissioning. These accessories are NOT included in the kit. Always have the installation carried out by a certified specialist company. UV-C radiation is dangerous to humans and animals and can damage the skin and/or eyes! Switch off the unit before approaching it! Submersible UV-C lamps must always be completely submerged in water! The seller is not fully liable for any damage caused by improper assembly, improper commissioning or improper operation, but the customer or the installer. Installation or operating instructions are NOT enclosed with the delivery!

Function: The new electronic level differential switch WPS3000plus is suitable for automatic level monitoring of conductive liquids in containers, wells, water tanks and the like. The device can be configured either as a refilling device or as an emptying device by means of a slide switch on the front. In this case, the liquid level is automatically maintained between two water sensors (min. and max.). When water enters or reaches a certain level, a relay picks up and switches e.g. mains-operated pumps, valves or warning devices on or off. The WPS 3000plus is suitable for all storage tanks made of concrete, plastic or metal and is quickly installed as all connections are plug-in. Due to the omission of moving float switches, it operates absolutely interference-free. Features: - Switching point freely selectable at any water level via two water sensors- For all storage tanks made of concrete, plastic or metal- Switching output (rel.) configurable as NC or NO (fill/empty) via switch on the front- Remote measurement possible up to 25 m via two-wire cable- Special features: The measuring electrodes are chlorine and salt water resistant (stainless steel AISI 316 / V4A)- No dangerous mains voltage at the water sensor- Operation and monitoring-free- Very simple and quick installation, as ready to plug in- LED displays for mains, sensor min, sensor max, error and rel. on

Glass fibre reinforced polyamide housing, NBR rubber diaphragm, stainless steel core and screws. Pre-pressure 0.4 bar, working pressure 0.4 to 10 bar at 20°C, maximum working temperature + 4°C - + 75°C. Can be mounted in all positions. Working current 2.2 watts, current consumption 185 mA, closed as standard. Coil with bayonet lock and manual operation. All taps are tested!

- This product is only suitable for professional use. This is a spare parts set Included in the scope of delivery are: UV lamp, quartz glass, ballast unit, threaded bushing with AG   The unit is supplied WITHOUT plug. Attention! Important safety instructions!  These UV-C - XClear UVC - AquaForte - Submersible UVC lamps do NOT comply with the applicable DIN standards! Therefore the kit is delivered without plug. It must be installed by an experienced and recognised specialist company in accordance with DIN EN60335. Standard protective accessories (safety goggles, gloves, etc.) must be worn during installation, assembly and commissioning. These accessories are NOT included in the kit. Always have the installation carried out by a certified specialist company. UV-C radiation is dangerous to humans and animals and can damage the skin and/or eyes! Switch off the unit before approaching it! Submersible UV-C lamps must always be completely submerged in water! The seller is not fully liable for any damage caused by improper assembly, improper commissioning or improper operation, but the customer or the installer. Installation or operating instructions are NOT enclosed with the delivery!

- This product is only suitable for professional use. This is a spare parts set Included in the scope of delivery are: UV lamp, quartz glass, ballast unit, bushing with AG The unit is supplied WITHOUT plug. - These lamps can be used in filter tanks so that the water can flow through without resistance / pressure loss. - The plastic end of the lamp has a diameter of 32mm, so you can use 32mm pipe clamps (104045) to mount the lamp in a tank. - A special tank feed-through is also available to install the lamp directly e.g. in the filter (see illustration / 601236) Attention! Important safety instructions!  These UV-C - XClear UVC - AquaForte - Submersible UVC lamps do NOT comply with the applicable DIN standards! Therefore the kit is delivered without plug. It must be installed by an experienced and recognised specialist company in accordance with DIN EN60335. Standard protective accessories (safety goggles, gloves, etc.) must be worn during installation, assembly and commissioning. These accessories are NOT included in the kit. Always have the installation carried out by a certified specialist company. UV-C radiation is dangerous to humans and animals and can damage the skin and/or eyes! Switch off the unit before approaching it! Submersible UV-C lamps must always be completely submerged in water! The seller is not fully liable for any damage caused by improper assembly, improper commissioning or improper operation, but the customer or the installer. Installation or operating instructions are NOT enclosed with the delivery!

Cable temperature sensor Temperature sensor - suitable for TS 1000. You need this temperature sensor as an accessory or spare part for the TS 1000.   

Function: The TS 1000 temperature controller is ideally suited for all areas of application where temperature control is required in heating or cooling mode. An external temperature sensor records measuring ranges from -99 to +850°C. Features: - For wall mounting- PT1000 temperature sensor (not included)- Switching temperature freely adjustable from -99 ... +850 °C- Min./max. display- Serial interface for reading out measured data (optional)- Operation and monitoring free- Sensor short-circuit and sensor interruption are detected immediately- Output switches off in the event of a sensor error- Adjustable to heating or cooling- LED indicators for relay on, heating (red), cooling (yellow)- Data retention in case of power failure

Single transformer of 220 volts, output: 26 VAC, 600 mA and 15.6 VA. Fits all common irrigation computers.