Pond filters, filters of all kinds and accessories for pond construction 

Function Due to the high demand, the CF drum filter was built with an integrated pump chamber, biochamber and integrated flushing pump. This means that this drum filter has a plug and play system. On request, we can equip the filter with a submersible UVC and a pond pump according to your wishes. The function of the drum filter is to filter polluted water mechanically. Smallest particles are separated from the water by a stainless steel screen RVS 316 of 75 micrometres and led to the outside via a dirt drain. This filtering process is automatically regulated by a control system and monitored by probes. In the event of a malfunction, the filter automatically switches off the circulation and backwash pump. The water level is constantly monitored by probes. The EPS Combi Drum Filter CF-100 is made of very high quality PP plastic and is supplied including control, emergency cover switch, manual channel flushing, complete piping from the flushing pump to the flushing channel, level regulator, cover and built-in flushing pump in an unprecedented price/performance ratio. All inclusive. All EPS drum filters are reinforced with a 50/50 U-profile and an inner core of 40/40 4 Kant steel pipe. The direct drive from the motor to the drum eliminates wear parts such as V-belts, toothed belts or plastic gears. If the dirty water channel should ever become clogged due to strong filamentous algae or leaves, it is no problem to simply dismantle and clean it without having to dismantle the filter drum or remove the mesh. In the two integrated biochambers (128 x 55,7 x 100 cm) a Japanese air hose ( 19 mm ) is directly pre-installed for a better "moving bed" process for improved turbulence of the HX 13/17. A diaphragm pump of 100-120 L/min is required for this. We recommend either HAP series, the Secoh series or the AP series. In addition, the biochamber has been equipped with 8 mm slots to insert HX13/17.  Please note the protected and unprotected surface of the HX13/17. According to this, the square metre of bacteria removal surface is calculated. The CF-100 drum filter is available in both pump and gravity versions. Even if you have a gravity version, it is possible to convert it to a pump version in just a few steps (if you need help with this, we will be happy to assist you). Instructions for the conversion are enclosed with the control box. The fuse function or the emergency lid switch switches off the immersion UVCs directly when the lid is opened. The function is only guaranteed if they are connected via the supplied control unit. It is recommended that the electrical connection of the control unit is protected by a residual current circuit breaker. The control unit should not be directly exposed to moisture. Suitable connection accessories would be Elastomer sleeve 110mm, Elastomer end caps 110mm (if you do not need all inlets and outlets). As UV lamp we recommend our submersible UVC 40 W Amalgan or Immersion UVC 80 W Amalgam. Due to the use of deep well pumps, a flushing process is hardly audible. Additional options - different filter panels (filter mesh) in stainless steel RVS available to order and at extra cost in 43µ or 60µ (please note that with finer mesh the flow rate is 30% to 50% lower depending on the µ-thickness) - our EPS drum filters can be built individually on request according to drawings at an extra charge - individual biochambers (round or square) as well as trickle filters can be built on request in all sizes according to drawings - if you would like individual advice, please feel free to call us on 02945 / 96950 Functions of the control system: - Plug place for circulation and rinsing pump - plug and play via sensor with measuring pins  - automatic cleaning - Switch for on/off incl. emergency switch - Button for manual flushing - Flushing is triggered by probes (level of probes adjustable) - Rotation time/flush time adjustable - CE mark - detailed instructions for use are included - Cleaning is adjustable ( time and duration ) - Dry-running protection for the pond pump - Dry-running protection for circulation and flushing pump - Connections for sensor and safety switch Why EPS drum filters? after 30 years of experience and many purchased and self-tested filter systems from different suppliers, we decided to build our own drum filter series. There are stainless steel, PE and PP drum filters on the market. Some of the stainless steel filters were notable for their poor workmanship (cheap tank connectors that leaked, broke off or had rust defects). PE filters caused big problems when exposed to sunlight (bending and warping of the material) Many drum filters do not have a direct drive and are driven by pinions, V-belts or toothed belts. In our view, these are all weak points that can lead to malfunctions. For these reasons, we decided to build PP filters that do not deform, are acid-resistant and are operated with a direct drive. After an intensive test period of approx. 6 years in our own KOI facility, which consists of approx. 60 tanks of various sizes, with full fish stocking and abundant feeding every day, we started series production. All the problems mentioned are now a thing of the past - We love clear water and healthy fish EPS drum filters reduce the need for cleaning and maintenance in fish farms and garden ponds to a minimum. The processing is carried out using the latest technology such as CNC machines, which guarantees quality and precision. The systems can be used in the koi and/or swimming pond sector as well as in fish farming, industry and public areas.Dispatch by one-way pallet 220x100x80The new control system is preset ex works with a water-saving function, whereby the first contact at the probes causes the drum to rotate half a turn without rinsing. At the second contact on the probes, the drum is rotated a full revolution and cleaned completely. This reduces electricity and water consumption. You can convince yourself of the quality at any time in our showroom We look forward to your visit

Function Due to the high demand, the CF drum filter was built with an integrated pump chamber, biochamber and integrated flushing pump. This means that this drum filter has a plug and play system. On request, we can equip the filter with a submersible UVC and a pond pump according to your wishes. The function of the drum filter is to filter polluted water mechanically. Smallest particles are separated from the water by a stainless steel screen RVS 316 of 75 micrometres and led to the outside via a dirt drain. This filtering process is automatically regulated by a control system and monitored by probes. In the event of a malfunction, the filter automatically switches off the circulation and backwash pump. The water level is constantly monitored by probes. The EPS Combi Drum Filter CF-100 is made of very high quality PP plastic and is supplied including control, emergency cover switch, manual channel flushing, complete piping from the flushing pump to the flushing channel, level regulator, cover and built-in flushing pump in an unprecedented price/performance ratio. All inclusive. All EPS drum filters are reinforced with a 50/50 U-profile and an inner core of 40/40 4 Kant steel pipe. The direct drive from the motor to the drum eliminates wear parts such as V-belts, toothed belts or plastic gears. If the dirty water channel should ever become clogged due to strong filamentous algae or leaves, it is no problem to simply dismantle and clean it without having to dismantle the filter drum or remove the mesh. In the two integrated biochambers (128 x 55,7 x 100 cm) a Japanese air hose ( 19 mm ) is directly pre-installed for a better "moving bed" process for improved turbulence of the HX 13/17. A diaphragm pump of 100-120 L/min is required for this. We recommend either HAP series, the Secoh series or the AP series. In addition, the biochamber has been equipped with 8 mm slots to insert HX13/17.  Please note the protected and unprotected surface of the HX13/17. According to this, the square metre of bacteria removal surface is calculated. The CF-100 drum filter is available in both pump and gravity versions. Even if you have a gravity version, it is possible to convert it to a pump version in just a few steps (if you need help with this, we will be happy to assist you). Instructions for the conversion are enclosed with the control box. The fuse function or the emergency lid switch switches off the immersion UVCs directly when the lid is opened. The function is only guaranteed if they are connected via the supplied control unit. It is recommended that the electrical connection of the control unit is protected by a residual current circuit breaker. The control unit should not be directly exposed to moisture. Suitable connection accessories would be Elastomer sleeve 110mm, Elastomer end caps 110mm (if you do not need all inlets and outlets). As UV lamp we recommend our submersible UVC 40 W Amalgan or Immersion UVC 80 W Amalgam. Due to the use of deep well pumps, a flushing process is hardly audible. Additional options - different filter panels (filter mesh) in stainless steel RVS available to order and at extra cost in 43µ or 60µ (please note that with finer mesh the flow rate is 30% to 50% lower depending on the µ-thickness) - our EPS drum filters can be built individually on request according to drawings at an extra charge - individual biochambers (round or square) as well as trickle filters can be built on request in all sizes according to drawings - if you would like individual advice, please feel free to call us on 02945 / 96950 Functions of the control system: - Plug place for circulation and rinsing pump - plug and play via sensor with measuring pins  - automatic cleaning - Switch for on/off incl. emergency switch - Button for manual flushing - Flushing is triggered by probes (level of probes adjustable) - Rotation time/flush time adjustable - CE mark - detailed instructions for use are included - Cleaning is adjustable ( time and duration ) - Dry-running protection for the pond pump - Dry-running protection for circulation and flushing pump - Connections for sensor and safety switch Why EPS drum filters? after 30 years of experience and many purchased and self-tested filter systems from different suppliers, we decided to build our own drum filter series. There are stainless steel, PE and PP drum filters on the market. Some of the stainless steel filters were notable for their poor workmanship (cheap tank connectors that leaked, broke off or had rust defects). PE filters caused big problems when exposed to sunlight (bending and warping of the material) Many drum filters do not have a direct drive and are driven by pinions, V-belts or toothed belts. In our view, these are all weak points that can lead to malfunctions. For these reasons, we decided to build PP filters that do not deform, are acid-resistant and are operated with a direct drive. After an intensive test period of approx. 6 years in our own KOI facility, which consists of approx. 60 tanks of various sizes, with full fish stocking and abundant feeding every day, we started series production. All the problems mentioned are now a thing of the past - We love clear water and healthy fish EPS drum filters reduce the need for cleaning and maintenance in fish farms and garden ponds to a minimum. The processing is carried out using the latest technology such as CNC machines, which guarantees quality and precision. The systems can be used in the koi and/or swimming pond sector as well as in fish farming, industry and public areas.Dispatch by one-way pallet 220x100x80The new control system is preset ex works with a water-saving function, whereby the first contact at the probes causes the drum to rotate half a turn without rinsing. At the second contact on the probes, the drum is rotated a full revolution and cleaned completely. This reduces electricity and water consumption. You can convince yourself of the quality at any time in our showroom We look forward to your visit

Funktion Trommelfilter / Drum Filter Die Funktion des Trommelfilters ist es, belastetes Wasser mechanisch zu filtern. Wir sind nicht nur Hersteller, sondern auch Praktiker. Bei uns werden alle Filter die von uns neu entwickelt werden vorab 3-6 Monate in unserer Fischzucht Anlage getestet und gehen erst nach erfolgreicher Testphase in den Verkauf. Durch ein Edelstahlsieb RVS 316 von 100 Mikrometer werden Kleinstpartikel vom Wasser getrennt und über einen Schmutzablauf nach Außen geführt. Die Trommelfilter von EPS bieten Möglichkeiten für mehrere Anwendungsbereiche. Ob Koi-, Schwimmteich oder industrielle technische Anlagen, wir bieten Ihnen immer das passende System an. Der Filterprozess wird über eine Steuerung automatisch geregelt und von Sonden überwacht. Bei einer Fehlfunktion schaltet der Filter automatisch Umwälz- und Rückspülpumpe ab. Der Wasserstand wird ständig von Sonden überwacht. Der EPS Trommelfilter PP150 ist sehr hochwertig aus PP Kunststoff verarbeitet und wird inklusive Steuerung, Notausdeckelschalter, manueller Rinnenspülung, Niveauregler, Deckel in einem noch nie dagewesenen Preis/Leistungsverhältnis geliefert. All inclusive. Das heißt, bei uns leidet nicht die Qualität unter dem Preis. Alle Trommelfilter von EPS haben eine Verstärkung mit einem 50/50 U- Profil sowie einem Innenkern aus 40/40 4 Kant Stahlrohr. Durch den Direktantrieb vom Motor zur Trommel fallen Verschleißteile wie bei herkömmlichen Trommelfiltern (Keilriemen, Zahnriemen oder Kunststoffzahnräder) weg. Falls die Schmutzwasserrinne durch starkes Fadenalgenvorkommen oder Blätter einmal verstopfen sollte, ist es kein Problem diese einfach zu demontieren und zu reinigen ohne die Filtertrommel auszubauen oder das Gewebe zu entfernen. Hierzu haben wir auch zusätzlich eine manuelle Rinnenspülung installiert. Der PP150 Trommelfilter ist sowohl als Pump- sowie als Schwerkraftversion lieferbar. Auch wenn Sie eine Schwerkraftversion besitzen, ist es mit wenigen Handgriffen möglich, diese auf Pumpversion umzubauen (wenn Sie hierzu Hilfe benötigen, stehen wir Ihnen gerne zur Verfügung). Durch die Sicherungsfunktion bzw. den Notausdeckelschalter werden die Tauch UVCs direkt abgeschaltet, wenn der Deckel geöffnet wird. Die Funktion ist nur gewährleistet, wenn diese über die mitgelieferte Steuerung angeschlossen werden. Es ist empfehlenswert den elektrischen Anschluss der Steuerung mit einem FI- Schutzschalter abzusichern. Die Steuerung sollte nicht direkter Feuchtigkeit ausgesetzt werden (Regen). Passendes Anschlusszubehör wären Elastomer-Muffe 110 mm, Elastomer-Endkappe 110 mm (falls Sie nicht alle Ein- und Ausläufe benötigen). Als UV-Lampe empfehlen wir unsere Tauch UVC 40 W Amalgam oder Tauch UVC 80 W Amalgam.   Zusätzliche Optionen: • unterschiedliche Filter-Paneele (Filtergewebe) in Edelstahl RVS auf Bestellung möglich (bitte beachten Sie, dass bei feineren Geweben die Durchflussrate um 30% bis 50% je nach µ-Stärke geringer ist) • unsere EPS-Trommelfilter können auf Wunsch individuell nach Zeichnung gegen Aufpreis gebaut werden • individuelle Biokammern (rund oder eckig) sowie Rieselfilter können auf Wunsch in allen Größen nach Zeichnung gebaut werden • falls Sie eine individuelle Beratung wünschen, können Sie uns gerne anrufen ☎️02945 / 96950   Funktionen der Steuerung: • Steckerplatz für Umwälz- und Spülpumpe • Plug and Play über einen Sensor (Messsonden) • automatische Reinigung • Schalter für Ein-/Aus inkl. Notschalter • Taste für manuelles Spülen • Die Spülungen werden durch Sonden ausgelöst (Niveau der Sonden verstellbar) • Drehzeit / Spülzeit einstellbar • CE Konformitätserklärung wird mitgeliefert • ausführlich Gebrauchs- / Bedienungsanleitung wird mitgeliefert (deutsch oder englisch) • Aufstell- / Einbauanleitung wird mitgeliefert (deutsch oder englisch) • Reinigung ist einstellbar (Zeit und Dauer) • Trockenlaufschutz für die Teichpumpe • Trockenlaufschutz für Umwälz- und Spülpumpe • Anschlüsse für Fühler und Sicherheitsschalter • alle Steckdosen sind einzeln abgesichert (5/10 A mit außenliegenden Sicherungen)   Warum EPS- Trommelfilter? Aus 30-jähriger Erfahrung und vielen gekauften und selbst getesteten Filtersystemen von unterschiedlichen Anbietern haben wir uns entschlossen eine eigene Trommelfilterserie zu bauen. Es gibt auf dem Markt Trommelfilter aus Edelstahl, Polyethylen (PE) sowie Polypropylen (PP). Die Edelstahlfilter sind teilweise durch schlechte Verarbeitung (billige Tank Connectoren, die undicht waren, abbrachen oder Rostmängel aufwiesen) aufgefallen. PE Filter verursachten große Probleme bei Sonneneinstrahlung (Verbiegen und Verziehen des Materials). Viele Trommelfilter haben keinen Direktantrieb und werden über Ritzel, Keil- oder Zahnriemen angetrieben. Dies alles sind aus unsere Sicht Schwachpunkte, die zu Störungen führen können. Aus diesen Gründen haben wir uns entschlossen PP- Filter zu bauen die sich nicht verformen, säurefest sind und mit einem Direktantrieb betrieben werden (Industrie-Motor). Nach einer intensiven Testzeit von ca. 6 Jahren in unserer eigenen KOI- Anlage, die aus ca. 60 Becken unterschiedlichster Größe besteht, sowie bei vollem Fischbesatz und üppiger Fütterung täglich, haben wir die Serienproduktion aufgenommen. Alle genannten Probleme gehören nun der Vergangenheit an - Wir lieben klares Wasser und gesunde Fische - EPS Trommelfilter reduzieren den Reinigungs- und Wartungseinsatz bei Fischzuchten und Gartenteichen auf ein Minimum. Die Verarbeitung erfolgt über modernste Technologie wie CNC- Maschinen, wodurch Qualität und Präzision gewährleistet sind. Die Anlagen können im Koi- und/oder Schwimmteichbereich sowie bei der Fischzucht, in der Industrie und öffentlichen Bereichen eingesetzt werden. Auch bei Problemen stehen wir jederzeit mit Wort und Tat zur Verfügung. Bitte bedenken Sie, dass ein Trommelfilter aus mehreren technischen Komponenten gefertigt wird.   🚚 Versand per Einwegpalette   Sie können sich jederzeit von der Qualität in unsere Ausstellung überzeugen. Wir freuen uns auf Ihren Besuch 😊

Funktion Trommelfilter / Drum Filter Die Funktion des Trommelfilters ist es, belastetes Wasser mechanisch zu filtern. Wir sind nicht nur Hersteller, sondern auch Praktiker. Bei uns werden alle Filter die von uns neu entwickelt werden vorab 3-6 Monate in unserer Fischzucht Anlage getestet und gehen erst nach erfolgreicher Testphase in den Verkauf. Durch ein Edelstahlsieb RVS 316 von 100 Mikrometer werden Kleinstpartikel vom Wasser getrennt und über einen Schmutzablauf nach Außen geführt. Die Trommelfilter von EPS bieten Möglichkeiten für mehrere Anwendungsbereiche. Ob Koi-, Schwimmteich oder industrielle technische Anlagen, wir bieten Ihnen immer das passende System an. Der Filterprozess wird über eine Steuerung automatisch geregelt und von Sonden überwacht. Bei einer Fehlfunktion schaltet der Filter automatisch Umwälz- und Rückspülpumpe ab. Der Wasserstand wird ständig von Sonden überwacht. Der EPS Trommelfilter PP150 ist sehr hochwertig aus PP Kunststoff verarbeitet und wird inklusive Steuerung, Notausdeckelschalter, manueller Rinnenspülung, Niveauregler, Deckel in einem noch nie dagewesenen Preis/Leistungsverhältnis geliefert. All inclusive. Das heißt, bei uns leidet nicht die Qualität unter dem Preis. Alle Trommelfilter von EPS haben eine Verstärkung mit einem 50/50 U- Profil sowie einem Innenkern aus 40/40 4 Kant Stahlrohr. Durch den Direktantrieb vom Motor zur Trommel fallen Verschleißteile wie bei herkömmlichen Trommelfiltern (Keilriemen, Zahnriemen oder Kunststoffzahnräder) weg. Falls die Schmutzwasserrinne durch starkes Fadenalgenvorkommen oder Blätter einmal verstopfen sollte, ist es kein Problem diese einfach zu demontieren und zu reinigen ohne die Filtertrommel auszubauen oder das Gewebe zu entfernen. Hierzu haben wir auch zusätzlich eine manuelle Rinnenspülung installiert. Der PP150 Trommelfilter ist sowohl als Pump- sowie als Schwerkraftversion lieferbar. Auch wenn Sie eine Schwerkraftversion besitzen, ist es mit wenigen Handgriffen möglich, diese auf Pumpversion umzubauen (wenn Sie hierzu Hilfe benötigen, stehen wir Ihnen gerne zur Verfügung). Durch die Sicherungsfunktion bzw. den Notausdeckelschalter werden die Tauch UVCs direkt abgeschaltet, wenn der Deckel geöffnet wird. Die Funktion ist nur gewährleistet, wenn diese über die mitgelieferte Steuerung angeschlossen werden. Es ist empfehlenswert den elektrischen Anschluss der Steuerung mit einem FI- Schutzschalter abzusichern. Die Steuerung sollte nicht direkter Feuchtigkeit ausgesetzt werden (Regen). Passendes Anschlusszubehör wären Elastomer-Muffe 110 mm, Elastomer-Endkappe 110 mm (falls Sie nicht alle Ein- und Ausläufe benötigen). Als UV-Lampe empfehlen wir unsere Tauch UVC 40 W Amalgam oder Tauch UVC 80 W Amalgam.   Zusätzliche Optionen: • unterschiedliche Filter-Paneele (Filtergewebe) in Edelstahl RVS auf Bestellung möglich (bitte beachten Sie, dass bei feineren Geweben die Durchflussrate um 30% bis 50% je nach µ-Stärke geringer ist) • unsere EPS-Trommelfilter können auf Wunsch individuell nach Zeichnung gegen Aufpreis gebaut werden • individuelle Biokammern (rund oder eckig) sowie Rieselfilter können auf Wunsch in allen Größen nach Zeichnung gebaut werden • falls Sie eine individuelle Beratung wünschen, können Sie uns gerne anrufen ☎️02945 / 96950   Funktionen der Steuerung: • Steckerplatz für Umwälz- und Spülpumpe • Plug and Play über einen Sensor (Messsonden) • automatische Reinigung • Schalter für Ein-/Aus inkl. Notschalter • Taste für manuelles Spülen • Die Spülungen werden durch Sonden ausgelöst (Niveau der Sonden verstellbar) • Drehzeit / Spülzeit einstellbar • CE Konformitätserklärung wird mitgeliefert • ausführlich Gebrauchs- / Bedienungsanleitung wird mitgeliefert (deutsch oder englisch) • Aufstell- / Einbauanleitung wird mitgeliefert (deutsch oder englisch) • Reinigung ist einstellbar (Zeit und Dauer) • Trockenlaufschutz für die Teichpumpe • Trockenlaufschutz für Umwälz- und Spülpumpe • Anschlüsse für Fühler und Sicherheitsschalter • alle Steckdosen sind einzeln abgesichert (5/10 A mit außenliegenden Sicherungen)   Warum EPS- Trommelfilter? Aus 30-jähriger Erfahrung und vielen gekauften und selbst getesteten Filtersystemen von unterschiedlichen Anbietern haben wir uns entschlossen eine eigene Trommelfilterserie zu bauen. Es gibt auf dem Markt Trommelfilter aus Edelstahl, Polyethylen (PE) sowie Polypropylen (PP). Die Edelstahlfilter sind teilweise durch schlechte Verarbeitung (billige Tank Connectoren, die undicht waren, abbrachen oder Rostmängel aufwiesen) aufgefallen. PE Filter verursachten große Probleme bei Sonneneinstrahlung (Verbiegen und Verziehen des Materials). Viele Trommelfilter haben keinen Direktantrieb und werden über Ritzel, Keil- oder Zahnriemen angetrieben. Dies alles sind aus unsere Sicht Schwachpunkte, die zu Störungen führen können. Aus diesen Gründen haben wir uns entschlossen PP- Filter zu bauen die sich nicht verformen, säurefest sind und mit einem Direktantrieb betrieben werden (Industrie-Motor). Nach einer intensiven Testzeit von ca. 6 Jahren in unserer eigenen KOI- Anlage, die aus ca. 60 Becken unterschiedlichster Größe besteht, sowie bei vollem Fischbesatz und üppiger Fütterung täglich, haben wir die Serienproduktion aufgenommen. Alle genannten Probleme gehören nun der Vergangenheit an - Wir lieben klares Wasser und gesunde Fische - EPS Trommelfilter reduzieren den Reinigungs- und Wartungseinsatz bei Fischzuchten und Gartenteichen auf ein Minimum. Die Verarbeitung erfolgt über modernste Technologie wie CNC- Maschinen, wodurch Qualität und Präzision gewährleistet sind. Die Anlagen können im Koi- und/oder Schwimmteichbereich sowie bei der Fischzucht, in der Industrie und öffentlichen Bereichen eingesetzt werden. Auch bei Problemen stehen wir jederzeit mit Wort und Tat zur Verfügung. Bitte bedenken Sie, dass ein Trommelfilter aus mehreren technischen Komponenten gefertigt wird.   🚚 Versand per Einwegpalette   Sie können sich jederzeit von der Qualität in unsere Ausstellung überzeugen. Wir freuen uns auf Ihren Besuch 😊

Function Due to the high demand, the CF drum filter was built with an integrated pump chamber, biochamber and integrated flushing pump. This means that this drum filter has a plug and play system. On request, we can equip the filter with an immersion UVC and a pond pump according to your wishes. The function of the drum filter is to filter polluted water mechanically. Smallest particles are separated from the water by a stainless steel screen RVS 316 of 75 micrometres and led to the outside via a dirt drain. This filtering process is automatically regulated by a control system and monitored by probes. In the event of a malfunction, the filter automatically switches off the circulation and backwash pump. The water level is constantly monitored by probes. The EPS Combi Drum Filter CF65 is made of very high quality PP plastic and is supplied including control, emergency cover switch, manual channel flushing, complete piping from the flushing pump to the flushing channel, level regulator, cover and built-in flushing pump in an unprecedented price/performance ratio. A pump chamber is directly integrated in these filters. With the 100 mm pipe connections facing inwards, either tube pumps or frequency-controlled pumps can be connected inside. This has the advantage that the pumps do not have to be flanged dry on the outside and the energy (heat) is supplied to the water. It is also better for the pumps because they are always cooled and cannot overheat. All EPS drum filters are reinforced with a 50/50 U-profile and an inner core of 40/40 4 Kant steel pipe. The direct drive from the motor to the drum means that there are no wear parts as with conventional drum filters (V-belts, toothed belts or plastic gears). If the waste water channel should ever become clogged due to strong filamentous algae or leaves, it is no problem to simply dismantle and clean it without having to remove the filter drum or the fabric. In the integrated biochamber (86 x 97 x 98 cm), a Japanese air hose ( 19 mm ) is directly pre-installed for a better "moving bed" process for improved turbulence of the HX 13/17. This requires a diaphragm pump of 100-120 L/min. We recommend either the HAP series, the Secoh series or the AP series. In addition, the biochamber has been equipped with 8mm slots to insert HX13/17.  Please note the protected and unprotected surface for the HX13/17. According to this, the square metre of bacteria removal surface is calculated. The CF65 drum filter is available in both pump and gravity versions. Even if you have a gravity version, it is possible to convert it to a pump version in just a few steps (if you need help with this, we will be happy to assist you). Instructions for the conversion are enclosed with the control box. The fuse function or the emergency lid switch switches off the immersion UVCs directly when the lid is opened. The function is only guaranteed if they are connected via the supplied control unit. It is recommended that the electrical connection of the control unit is protected by a residual current circuit breaker. The control unit should not be directly exposed to moisture. Suitable connection accessories would be elastomer sleeve 110mm, elastomer end caps 110mm (if you do not need all inlets and outlets). As UV lamp we recommend our submersible UVC 40W Amalgan or submersible UVC 80W Amalgam. By using deep well pumps a flushing process is hardly audible. Additional options - different filter panels (filter meshes) in stainless steel RVS available on order and at extra charge in 43µ or 60µ (please note that with finer meshes the flow rate is 30% to 50% lower depending on the µ-thickness) - our EPS drum filters can be built individually on request according to drawings at an extra charge - individual biochambers (round or square) as well as trickle filters can be built on request in all sizes according to drawings - if you would like individual advice, please feel free to call us on 02945 / 96950 Functions of the control system: - Plug location for circulation and rinsing pump - plug and play via sensor with measuring pins  - automatic cleaning - Switch for on/off incl. emergency switch - Button for manual flushing - Flushing is triggered by probes (level of probes adjustable) - Rotation time/flush time adjustable - CE mark - detailed instructions for use are included - Cleaning is adjustable ( time and duration ) - Dry-running protection for the pond pump - Dry-running protection for circulation and flushing pump - Connections for sensor and safety switch Why EPS drum filters? From 30 years of experience and many purchased and self-tested filter systems from different suppliers, we have decided to build our own drum filter series. There are stainless steel, PE and PP drum filters on the market. Some of the stainless steel filters were notable for their poor workmanship (cheap tank connectors that leaked, broke off or had rust defects). PE filters caused big problems when exposed to sunlight (bending and warping of the material) Many drum filters do not have a direct drive and are driven by pinions, V-belts or toothed belts. The use of salt also became problematic. In our view, these are all weak points that can lead to malfunctions. For these reasons, we decided to build PP filters that do not deform, are acid-resistant and are operated with a direct drive. After an intensive test period of approx. 6 years in our own KOI facility, which consists of approx. 60 tanks of various sizes, with full fish stocking and abundant feeding every day, we started series production. All these problems are now a thing of the past - We love clear water and healthy fish EPS drum filters reduce the need for cleaning and maintenance in fish farms and garden ponds to a minimum. The processing is done with the most modern technology such as CNC machines, which guarantees quality and precision. The systems can be used in the koi and/or swimming pond sector as well as in fish farming, industry and public areas. You can convince yourself of the quality at any time in our exhibition We look forward to your visit

Function Due to the high demand, the CF drum filter was built with an integrated pump chamber, biochamber and integrated flushing pump. This means that this drum filter has a plug and play system. On request, we can equip the filter with an immersion UVC and a pond pump according to your wishes. The function of the drum filter is to filter polluted water mechanically. Smallest particles are separated from the water by a stainless steel screen RVS 316 of 75 micrometres and led to the outside via a dirt drain. This filtering process is automatically regulated by a control system and monitored by probes. In the event of a malfunction, the filter automatically switches off the circulation and backwash pump. The water level is constantly monitored by probes. The EPS Combi Drum Filter CF65 is made of very high quality PP plastic and is supplied including control, emergency cover switch, manual channel flushing, complete piping from the flushing pump to the flushing channel, level regulator, cover and built-in flushing pump in an unprecedented price/performance ratio. A pump chamber is directly integrated in these filters. With the 100 mm pipe connections facing inwards, either tube pumps or frequency-controlled pumps can be connected inside. This has the advantage that the pumps do not have to be flanged dry on the outside and the energy (heat) is supplied to the water. It is also better for the pumps because they are always cooled and cannot overheat. All EPS drum filters are reinforced with a 50/50 U-profile and an inner core of 40/40 4 Kant steel pipe. The direct drive from the motor to the drum means that there are no wear parts as with conventional drum filters (V-belts, toothed belts or plastic gears). If the waste water channel should ever become clogged due to strong filamentous algae or leaves, it is no problem to simply dismantle and clean it without having to remove the filter drum or the fabric. In the integrated biochamber (86 x 97 x 98 cm), a Japanese air hose ( 19 mm ) is directly pre-installed for a better "moving bed" process for improved turbulence of the HX 13/17. This requires a diaphragm pump of 100-120 L/min. We recommend either the HAP series, the Secoh series or the AP series. In addition, the biochamber has been equipped with 8mm slots to insert HX13/17.  Please note the protected and unprotected surface for the HX13/17. According to this, the square metre of bacteria removal surface is calculated. The CF65 drum filter is available in both pump and gravity versions. Even if you have a gravity version, it is possible to convert it to a pump version in just a few steps (if you need help with this, we will be happy to assist you). Instructions for the conversion are enclosed with the control box. The fuse function or the emergency lid switch switches off the immersion UVCs directly when the lid is opened. The function is only guaranteed if they are connected via the supplied control unit. It is recommended that the electrical connection of the control unit is protected by a residual current circuit breaker. The control unit should not be directly exposed to moisture. Suitable connection accessories would be elastomer sleeve 110mm, elastomer end caps 110mm (if you do not need all inlets and outlets). As UV lamp we recommend our submersible UVC 40W Amalgan or submersible UVC 80W Amalgam. By using deep well pumps a flushing process is hardly audible. Additional options - different filter panels (filter meshes) in stainless steel RVS available on order and at extra charge in 43µ or 60µ (please note that with finer meshes the flow rate is 30% to 50% lower depending on the µ-thickness) - our EPS drum filters can be built individually on request according to drawings at an extra charge - individual biochambers (round or square) as well as trickle filters can be built on request in all sizes according to drawings - if you would like individual advice, please feel free to call us on 02945 / 96950 Functions of the control system: - Plug location for circulation and rinsing pump - plug and play via sensor with measuring pins  - automatic cleaning - Switch for on/off incl. emergency switch - Button for manual flushing - Flushing is triggered by probes (level of probes adjustable) - Rotation time/flush time adjustable - CE mark - detailed instructions for use are included - Cleaning is adjustable ( time and duration ) - Dry-running protection for the pond pump - Dry-running protection for circulation and flushing pump - Connections for sensor and safety switch Why EPS drum filters? From 30 years of experience and many purchased and self-tested filter systems from different suppliers, we have decided to build our own drum filter series. There are stainless steel, PE and PP drum filters on the market. Some of the stainless steel filters were notable for their poor workmanship (cheap tank connectors that leaked, broke off or had rust defects). PE filters caused big problems when exposed to sunlight (bending and warping of the material) Many drum filters do not have a direct drive and are driven by pinions, V-belts or toothed belts. The use of salt also became problematic. In our view, these are all weak points that can lead to malfunctions. For these reasons, we decided to build PP filters that do not deform, are acid-resistant and are operated with a direct drive. After an intensive test period of approx. 6 years in our own KOI facility, which consists of approx. 60 tanks of various sizes, with full fish stocking and abundant feeding every day, we started series production. All these problems are now a thing of the past - We love clear water and healthy fish EPS drum filters reduce the need for cleaning and maintenance in fish farms and garden ponds to a minimum. The processing is done with the most modern technology such as CNC machines, which guarantees quality and precision. The systems can be used in the koi and/or swimming pond sector as well as in fish farming, industry and public areas. You can convince yourself of the quality at any time in our exhibition We look forward to your visit

Function Due to the high demand, the TF -drum filter was built with an integrated pump chamber and integrated flushing pump. This means that this drum filter has a plug and play system. On request we can equip the filter with a submersible UVC and a pond pump according to your wishes.The function of the drum filter is to filter polluted water mechanically. A stainless steel screen RVS 316 of 75 micrometres separates the smallest particles from the water and leads them to the outside via a dirt drain. This filtering process is automatically regulated by a control system and monitored by probes. In the event of a malfunction, the filter automatically switches off the circulation and backwash pump. The water level is constantly monitored by a level controller. The EPS TF100 drum filter is made of very high quality PP plastic and is supplied including control unit, level controller, cover, channel flushing, built-in flushing pump, direct drive, built-in punp chamber and additional sockets for UVC and a second pump in an unprecedented price/performance ratio. The advantage of the EPS TF100 is that by turning over a ball valve and pressing the test button "Flush", the gutter flushing is activated and thus cleaned of foliage, thread algae etc.. The filter also has a built-in pump chamber. In the gravity version, pond pumps can be connected directly in the filter. We recommend the adjustable Vario 20,000 / 30,000 or a 60,000/70,000 tube pump. The EPS TF100 drum filter is available in both pump and gravity versions. Based on practical experience, the EPS TF100 drum filter has been modified from the PP100 and several features have been incorporated that are only available at extra cost with the PP65 or are not available at all. The EPS TF100 drum filter can also be supplied as a plug-in system complete with built-in submersible UVC and pond pump (power in each case as required). If installation is desired, please contact us so that we or one of our partners can respond to your individual wishes. Suitable connection accessories would be elastomer socket 110mm, elastomer end caps 110mm (if you do not need all inlets and outlets). As UV lamp we recommend our UVC 80W Amalgam.   Additional options - different filter panels (filter mesh) in stainless steel RVS available on order in 43µ or 60µ (please note that with finer meshes the flow rate is 30% to 50% lower depending on the µ-thickness) - our EPS drum filters can also be custom-built to different dimensions and pipe connections according to drawings - control cable, as well as connection cable for 220V (standard 2.5m) can be extended for an extra charge   if you would like individual advice, please feel free to call us on 02945 / 96950 Functions of the control unit: - Plug location for circulation and rinsing pump - Plug and Play via sensor with measuring pins  - automatic cleaning - Switch for on/off incl. emergency switch - Button for manual flushing - Flushing is triggered by probes (level of probes adjustable) - Rotation time/ rinsing time adjustable - CE mark - Detailed instructions for use are included - Cleaning is adjustable ( time and duration ) - Dry-running protection for the pond pump - Dry-running protection for circulation and flushing pump - Connections for sensor and safety switch Why EPS drum filters? after 30 years of experience and many purchased and self-tested filter systems from different suppliers, we decided to build our own drum filter series. There are stainless steel, PE and PP drum filters on the market. Some of the stainless steel filters were notable for their poor workmanship (cheap tank connectors that leaked, broke off or had rust defects). PE filters caused big problems when exposed to sunlight (bending and warping of the material) Many drum filters do not have a direct drive and are driven by pinions, V-belts or toothed belts. The use of salt also became problematic. In our view, these are all weak points that can lead to malfunctions. For these reasons, we decided to build PP filters that do not deform, are acid-resistant and are operated with a direct drive. After an intensive test period of approx. 6 years in our own KOI facility, which consists of approx. 60 tanks of various sizes, with full fish stocking and abundant feeding every day, we started series production. All the problems mentioned are now a thing of the past - We love clear water and healthy fish EPS drum filters reduce the need for cleaning and maintenance in fish farms and garden ponds to a minimum. The processing is carried out using the latest technology such as CNC machines, which guarantees quality and precision. The systems can be used in the koi and/or swimming pond sector as well as in fish farming, industry and public areas. The new control system is pre-set in the factory with a water-saving function, whereby the first contact at the probes causes the drum to rotate half a turn without rinsing. At the second contact at the probes, the drum is rotated a full revolution and cleaned completely. This reduces electricity and water consumption.Dispatch by Euro pallet 140x100x100 cm.You can convince yourself of the quality at any time in our showroom We are looking forward to your visit  

Function Due to the high demand, the TF -drum filter was built with an integrated pump chamber and integrated flushing pump. This means that this drum filter has a plug and play system. On request we can equip the filter with a submersible UVC and a pond pump according to your wishes.The function of the drum filter is to filter polluted water mechanically. A stainless steel screen RVS 316 of 75 micrometres separates the smallest particles from the water and leads them to the outside via a dirt drain. This filtering process is automatically regulated by a control system and monitored by probes. In the event of a malfunction, the filter automatically switches off the circulation and backwash pump. The water level is constantly monitored by a level controller. The EPS TF100 drum filter is made of very high quality PP plastic and is supplied including control unit, level controller, cover, channel flushing, built-in flushing pump, direct drive, built-in punp chamber and additional sockets for UVC and a second pump in an unprecedented price/performance ratio. The advantage of the EPS TF100 is that by turning over a ball valve and pressing the test button "Flush", the gutter flushing is activated and thus cleaned of foliage, thread algae etc.. The filter also has a built-in pump chamber. In the gravity version, pond pumps can be connected directly in the filter. We recommend the adjustable Vario 20,000 / 30,000 or a 60,000/70,000 tube pump. The EPS TF100 drum filter is available in both pump and gravity versions. Based on practical experience, the EPS TF100 drum filter has been modified from the PP100 and several features have been incorporated that are only available at extra cost with the PP65 or are not available at all. The EPS TF100 drum filter can also be supplied as a plug-in system complete with built-in submersible UVC and pond pump (power in each case as required). If installation is desired, please contact us so that we or one of our partners can respond to your individual wishes. Suitable connection accessories would be elastomer socket 110mm, elastomer end caps 110mm (if you do not need all inlets and outlets). As UV lamp we recommend our UVC 80W Amalgam.   Additional options - different filter panels (filter mesh) in stainless steel RVS available on order in 43µ or 60µ (please note that with finer meshes the flow rate is 30% to 50% lower depending on the µ-thickness) - our EPS drum filters can also be custom-built to different dimensions and pipe connections according to drawings - control cable, as well as connection cable for 220V (standard 2.5m) can be extended for an extra charge   if you would like individual advice, please feel free to call us on 02945 / 96950 Functions of the control unit: - Plug location for circulation and rinsing pump - Plug and Play via sensor with measuring pins  - automatic cleaning - Switch for on/off incl. emergency switch - Button for manual flushing - Flushing is triggered by probes (level of probes adjustable) - Rotation time/ rinsing time adjustable - CE mark - Detailed instructions for use are included - Cleaning is adjustable ( time and duration ) - Dry-running protection for the pond pump - Dry-running protection for circulation and flushing pump - Connections for sensor and safety switch Why EPS drum filters? after 30 years of experience and many purchased and self-tested filter systems from different suppliers, we decided to build our own drum filter series. There are stainless steel, PE and PP drum filters on the market. Some of the stainless steel filters were notable for their poor workmanship (cheap tank connectors that leaked, broke off or had rust defects). PE filters caused big problems when exposed to sunlight (bending and warping of the material) Many drum filters do not have a direct drive and are driven by pinions, V-belts or toothed belts. The use of salt also became problematic. In our view, these are all weak points that can lead to malfunctions. For these reasons, we decided to build PP filters that do not deform, are acid-resistant and are operated with a direct drive. After an intensive test period of approx. 6 years in our own KOI facility, which consists of approx. 60 tanks of various sizes, with full fish stocking and abundant feeding every day, we started series production. All the problems mentioned are now a thing of the past - We love clear water and healthy fish EPS drum filters reduce the need for cleaning and maintenance in fish farms and garden ponds to a minimum. The processing is carried out using the latest technology such as CNC machines, which guarantees quality and precision. The systems can be used in the koi and/or swimming pond sector as well as in fish farming, industry and public areas. The new control system is pre-set in the factory with a water-saving function, whereby the first contact at the probes causes the drum to rotate half a turn without rinsing. At the second contact at the probes, the drum is rotated a full revolution and cleaned completely. This reduces electricity and water consumption.Dispatch by Euro pallet 140x100x100 cm.You can convince yourself of the quality at any time in our showroom We are looking forward to your visit  

Function The function of the drum filter is to filter polluted water mechanically. Smallest particles are separated from the water by a stainless steel sieve RVS 316 of 75 micrometres and led to the outside via a dirt drain. This filtering process is automatically regulated by a control system and monitored by probes. In the event of a malfunction, the filter automatically switches off the circulation and backwash pump. The water level is constantly monitored by probes. The EPS Combi Drum Filter CL65 is made of very high quality PP plastic and is supplied including control, emergency cover switch, manual channel flushing, complete piping from the flushing pump to the flushing channel, level control, cover and built-in flushing pump in an unprecedented price/performance ratio. All EPS drum filters are reinforced with a 50/50 U-profile and an inner core of 40/40 4 Kant steel pipe. The direct drive from the motor to the drum eliminates the need for wear parts such as V-belts, toothed belts or plastic gears found in conventional drum filters. If the dirty water channel should ever become clogged due to strong filamentous algae or leaves, it is no problem to simply dismantle and clean it without having to dismantle the filter drum or remove the mesh. In the integrated biochamber (102 x 98 x 97 cm), a Japanese air hose (19 mm) is directly pre-installed for a better "moving bed" process for improved turbulence of the HX 13/17. This requires a diaphragm pump of 100-120 L/min. We recommend either HAP series, the Secoh series or the AP series. In addition, the biochamber has been equipped with 8mm slots to insert HX13/17.  Please note the protected and unprotected surface of the HX13/17. According to this, the square metre of bacteria removal surface is calculated. The CL65 drum filter is available in both pump and gravity versions. Even if you have a gravity version, it is possible to convert it to a pump version in just a few steps (if you need help with this, we will be happy to assist you). Instructions for the conversion are enclosed with the control box. The fuse function or the emergency lid switch switches off the immersion UVCs directly when the lid is opened. The function is only guaranteed if they are connected via the supplied control unit. It is recommended that the electrical connection of the control unit is protected by a residual current circuit breaker. The control unit should not be directly exposed to moisture. Suitable connection accessories would be Elastomer sleeve 110mm, Elastomer end caps 110mm (if you do not need all inlets and outlets). As UV lamp we recommend our submersible UVC 40W Amalgan or Immersion UVC 80W Amalgam. Due to the use of deep well pumps, a flushing process is hardly audible. Additional options - different filter panels (filter mesh) in stainless steel RVS available to order and at extra cost in 43µ or 60µ (please note that with finer mesh the flow rate is 30% to 50% lower depending on the µ-thickness) - our EPS drum filters can be built individually on request according to drawings at an extra charge - individual biochambers (round or square) as well as trickle filters can be built on request in all sizes according to drawing - if you would like individual advice, please feel free to call us on 02945 / 96950 Functions of the control system: - Plug place for circulation and rinsing pump - plug and play via sensor with measuring pins  - automatic cleaning - Switch for on/off incl. emergency switch - Button for manual flushing - Flushing is triggered by probes (level of probes adjustable) - Rotation time/flush time adjustable - CE mark - detailed instructions for use are included - Cleaning is adjustable ( time and duration ) - Dry-running protection for the pond pump - Dry-running protection for circulation and flushing pump - Connections for sensor and safety switch Why EPS drum filters? after 30 years of experience and many purchased and self-tested filter systems from different suppliers, we decided to build our own drum filter series. There are stainless steel, PE and PP drum filters on the market. Some of the stainless steel filters were notable for their poor workmanship (cheap tank connectors that leaked, broke off or had rust defects). PE filters caused big problems when exposed to sunlight (bending and warping of the material) Many drum filters do not have a direct drive and are driven by pinions, V-belts or toothed belts. The use of salt also became problematic. In our view, these are all weak points that can lead to malfunctions. For these reasons, we decided to build PP filters that do not deform, are acid-resistant and are operated with a direct drive. After an intensive test period of approx. 1.5 years in our own KOI facility, which consists of approx. 60 tanks of various sizes, with full fish stocking and abundant feeding every day, we started series production. All these problems are now a thing of the past - We love clear water and healthy fish EPS drum filters reduce the need for cleaning and maintenance in fish farms and garden ponds to a minimum. The processing is carried out using the latest technology such as CNC machines, which guarantees quality and precision. The systems can be used in the koi and/or swimming pond sector as well as in fish farming, industry and public areas.Dispatch by one-way pallet 220x100x80Technical data:EPS Combi Drum Filter CL65NEW: Water saving function via the intelligent control- the new control is pre-set with a water saving function ex works, whereby the first contact at the probes causes the drum to rotate half a turn without rinsing. At the second contact on the probes, the drum is rotated a full revolution and cleaned completely. This reduces electricity and water consumption- maximum flow rate with gravity: 65 m³ / hr. (with pumped version -30% pump capacity)- Dimensions: 205 x 97 x 98 cm- Material: PP 10 - 15mm and 2 mm stainless steel drum- Installation height with gravity: 13 cm above water- Water volume biochamber: approx. 970 L- Volume biomedium: approx. 350 - 450 L- Number of inlets: 6 x 110 mm- Number of outlets: 7 x 110 mm- Dirty water outlet: 1 x 110 mm- Flushing pump: EPS750- Weight: approx. 100 kg- Noise level: < 70 db- Mains voltage: 230V / 50 Hz- Removable nozzle assembly- Unscrewable flushing channel - Incl. manual channel flushing with ball valve- 2x 90 mm drum bypass- Incl. six sockets (1x drum motor, 1x flushing pump, 3x pond pump, 1x 230V for second pond pump or UVC)- Direct drive from motor to drum- Built-in Japanese 19mm air hose for better movement of the biomedium (Helix)- Connection for air hose 20 mm (other sizes individually possible)- Stainless steel filter panel- Stainless steel mesh 75 micron RVS 316- Flushing times adjustable- Drive motor 220V 50NM- Incl. Emergency cover switch- incl. control unit and measuring probes- maintenance key for specialised trade- cover in 2 parts is part of the delivery- operating instructions as well as control unit instructions are included in the delivery- conversion from gravity to pump version is possible in just a few steps ( conversion instructions in the control unit box )- guarantee: 2 years (the stainless steel sieve is a wearing part and excluded from the guarantee)- payment by instalments via PayPal possible You can convince yourself of the quality at any time in our showroom We look forward to your visit

Function The function of the drum filter is to filter polluted water mechanically. Smallest particles are separated from the water by a stainless steel sieve RVS 316 of 75 micrometres and led to the outside via a dirt drain. This filtering process is automatically regulated by a control system and monitored by probes. In the event of a malfunction, the filter automatically switches off the circulation and backwash pump. The water level is constantly monitored by probes. The EPS Combi Drum Filter CL65 is made of very high quality PP plastic and is supplied including control, emergency cover switch, manual channel flushing, complete piping from the flushing pump to the flushing channel, level regulator, cover and built-in flushing pump in an unprecedented price/performance ratio. All inclusive. All EPS drum filters are reinforced with a 50/50 U-profile and an inner core of 40/40 4 Kant steel pipe. The direct drive from the motor to the drum means that there are no wear parts as with conventional drum filters (V-belts, toothed belts or plastic gears). If the dirty water channel should ever become clogged due to strong filamentous algae or leaves, it is no problem to simply dismantle and clean it without having to dismantle the filter drum or remove the mesh. In the integrated biochamber (102 x 98 x 97 cm) a Japanese air hose ( 19 mm ) is directly pre-installed for a better "moving bed" process for improved turbulence of the HX 13/17. This requires a diaphragm pump of 100-120 L/min. We recommend either HAP series, the Secoh series or the AP series. In addition, the biochamber has been equipped with 8 mm slots to insert HX13/17.  Please note the protected and unprotected surface of the HX13/17. According to this, the square metre of bacteria removal surface is calculated. The CL65 drum filter is available in both pump and gravity versions. Even if you have a gravity version, it is possible to convert it to a pump version in just a few steps (if you need help with this, we will be happy to assist you). Instructions for the conversion are enclosed with the control box. The fuse function or the emergency lid switch switches off the immersion UVCs directly when the lid is opened. The function is only guaranteed if they are connected via the supplied control unit. It is recommended that the electrical connection of the control unit is protected by a residual current circuit breaker. The control unit should not be directly exposed to moisture. Suitable connection accessories would be Elastomer sleeve 110mm, Elastomer end caps 110mm (if you do not need all inlets and outlets). As UV lamp we recommend our submersible UVC 40 W Amalgan or Immersion UVC 80 W Amalgam. Due to the use of deep well pumps, a flushing process is hardly audible. Additional options - different filter panels (filter mesh) in stainless steel RVS available to order and at extra cost in 43µ or 60µ (please note that with finer mesh the flow rate is 30% to 50% lower depending on the µ-thickness) - our EPS drum filters can be built individually on request according to drawings at an extra charge - individual biochambers (round or square) as well as trickle filters can be built on request in all sizes according to drawing - if you would like individual advice, please feel free to call us on 02945 / 96950 Functions of the control system: - Plug place for circulation and rinsing pump - plug and play via sensor with measuring pins  - automatic cleaning - Switch for on/off incl. emergency switch - Button for manual flushing - Flushing is triggered by probes (level of probes adjustable) - Rotation time/flush time adjustable - CE mark - detailed instructions for use are included - Cleaning is adjustable ( time and duration ) - Dry-running protection for the pond pump - Dry-running protection for circulation and flushing pump - Connections for sensor and safety switch Why EPS drum filters? after 30 years of experience and many purchased and self-tested filter systems from different suppliers, we decided to build our own drum filter series. There are stainless steel, PE and PP drum filters on the market. Some of the stainless steel filters were notable for their poor workmanship (cheap tank connectors that leaked, broke off or had rust defects). PE filters caused big problems when exposed to sunlight (bending and warping of the material) Many drum filters do not have a direct drive and are driven by pinions, V-belts or toothed belts. In our view, these are all weak points that can lead to malfunctions. For these reasons, we decided to build PP filters that do not deform, are acid-resistant and are operated with a direct drive. After an intensive test period of approx. 6 years in our own KOI facility, which consists of approx. 60 tanks of various sizes, with full fish stocking and abundant feeding every day, we started series production. All these problems are now a thing of the past - We love clear water and healthy fish EPS drum filters reduce the need for cleaning and maintenance in fish farms and garden ponds to a minimum. The processing is carried out using the latest technology such as CNC machines, which guarantees quality and precision. The systems can be used in the koi and/or swimming pond sector as well as in fish farming, industry and public areas.Dispatch by one-way pallet 220x100x80Technical data:EPS Combi Drum Filter CL65The new control system is preset ex works with a water-saving function, whereby the first contact at the probes causes the drum to rotate half a turn without flushing. At the second contact on the probes, the drum is rotated a full revolution and cleaned completely. This reduces electricity and water consumption. You can convince yourself of the quality at any time in our showroom We look forward to your visit

Function The function of the drum filter is to filter polluted water mechanically. Smallest particles are separated from the water by a stainless steel sieve RVS 316 of 75 micrometres and led to the outside via a dirt drain. This filtering process is automatically regulated by a control system and monitored by probes. In the event of a malfunction, the filter automatically switches off the circulation and backwash pump. The water level is constantly monitored by probes. The EPS Combi Drum Filter CL65 is made of very high quality PP plastic and is supplied including control, emergency cover switch, manual channel flushing, complete piping from the flushing pump to the flushing channel, level regulator, cover and built-in flushing pump in an unprecedented price/performance ratio. All inclusive. All EPS drum filters are reinforced with a 50/50 U-profile and an inner core of 40/40 4 Kant steel pipe. The direct drive from the motor to the drum means that there are no wear parts as with conventional drum filters (V-belts, toothed belts or plastic gears). If the dirty water channel should ever become clogged due to strong filamentous algae or leaves, it is no problem to simply dismantle and clean it without having to dismantle the filter drum or remove the mesh. In the integrated biochamber (102 x 98 x 97 cm) a Japanese air hose ( 19 mm ) is directly pre-installed for a better "moving bed" process for improved turbulence of the HX 13/17. This requires a diaphragm pump of 100-120 L/min. We recommend either HAP series, the Secoh series or the AP series. In addition, the biochamber has been equipped with 8 mm slots to insert HX13/17.  Please note the protected and unprotected surface of the HX13/17. According to this, the square metre of bacteria removal surface is calculated. The CL65 drum filter is available in both pump and gravity versions. Even if you have a gravity version, it is possible to convert it to a pump version in just a few steps (if you need help with this, we will be happy to assist you). Instructions for the conversion are enclosed with the control box. The fuse function or the emergency lid switch switches off the immersion UVCs directly when the lid is opened. The function is only guaranteed if they are connected via the supplied control unit. It is recommended that the electrical connection of the control unit is protected by a residual current circuit breaker. The control unit should not be directly exposed to moisture. Suitable connection accessories would be Elastomer sleeve 110mm, Elastomer end caps 110mm (if you do not need all inlets and outlets). As UV lamp we recommend our submersible UVC 40 W Amalgan or Immersion UVC 80 W Amalgam. Due to the use of deep well pumps, a flushing process is hardly audible. Additional options - different filter panels (filter mesh) in stainless steel RVS available to order and at extra cost in 43µ or 60µ (please note that with finer mesh the flow rate is 30% to 50% lower depending on the µ-thickness) - our EPS drum filters can be built individually on request according to drawings at an extra charge - individual biochambers (round or square) as well as trickle filters can be built on request in all sizes according to drawing - if you would like individual advice, please feel free to call us on 02945 / 96950 Functions of the control system: - Plug place for circulation and rinsing pump - plug and play via sensor with measuring pins  - automatic cleaning - Switch for on/off incl. emergency switch - Button for manual flushing - Flushing is triggered by probes (level of probes adjustable) - Rotation time/flush time adjustable - CE mark - detailed instructions for use are included - Cleaning is adjustable ( time and duration ) - Dry-running protection for the pond pump - Dry-running protection for circulation and flushing pump - Connections for sensor and safety switch Why EPS drum filters? after 30 years of experience and many purchased and self-tested filter systems from different suppliers, we decided to build our own drum filter series. There are stainless steel, PE and PP drum filters on the market. Some of the stainless steel filters were notable for their poor workmanship (cheap tank connectors that leaked, broke off or had rust defects). PE filters caused big problems when exposed to sunlight (bending and warping of the material) Many drum filters do not have a direct drive and are driven by pinions, V-belts or toothed belts. In our view, these are all weak points that can lead to malfunctions. For these reasons, we decided to build PP filters that do not deform, are acid-resistant and are operated with a direct drive. After an intensive test period of approx. 6 years in our own KOI facility, which consists of approx. 60 tanks of various sizes, with full fish stocking and abundant feeding every day, we started series production. All these problems are now a thing of the past - We love clear water and healthy fish EPS drum filters reduce the need for cleaning and maintenance in fish farms and garden ponds to a minimum. The processing is carried out using the latest technology such as CNC machines, which guarantees quality and precision. The systems can be used in the koi and/or swimming pond sector as well as in fish farming, industry and public areas.Dispatch by one-way pallet 220x100x80Technical data:EPS Combi Drum Filter CL65The new control system is preset ex works with a water-saving function, whereby the first contact at the probes causes the drum to rotate half a turn without flushing. At the second contact on the probes, the drum is rotated a full revolution and cleaned completely. This reduces electricity and water consumption. You can convince yourself of the quality at any time in our showroom We look forward to your visit

Function Due to the high demand, the CF drum filter was built with an integrated pump chamber, biochamber and integrated flushing pump. This means that this drum filter has a plug and play system. On request, we can equip the filter with a submersible UVC and a pond pump according to your wishes. The function of the drum filter is to filter polluted water mechanically. Smallest particles are separated from the water by a stainless steel screen RVS 316 of 75 micrometres and led to the outside via a dirt drain This filtering process is automatically regulated by a control system and monitored by probes. In the event of a malfunction, the filter automatically switches off the circulation and backwash pump. The water level is constantly monitored by probes. The EPS Combi Drum Filter CF-35 is made of very high quality PP plastic and is supplied including control, emergency cover switch, manual channel flushing, complete piping from the flushing pump to the flushing channel, level regulator, cover and built-in flushing pump in an unprecedented price/performance ratio. All inclusive. All EPS drum filters are reinforced with a 50/50 U-profile and an inner core of 40/40 4 Kant steel pipe. The direct drive from the motor to the drum eliminates wear parts such as V-belts, toothed belts or plastic gears. If the dirty water channel should ever become clogged due to strong filamentous algae or leaves, it is no problem to simply dismantle and clean it without having to remove the filter drum or the mesh. In the integrated biochamber ( x  x  cm ) a Japanese air hose ( 19 mm ) is directly pre-installed for a better "moving bed" process for improved turbulence of the HX 13/17. This requires a diaphragm pump of 100-120 L/min. We recommend either HAP series, the Secoh series or the AP series. In addition, the biochamber has been equipped with 8 mm slots to insert HX13/17.  Please note the protected and unprotected surface of the HX13/17. According to this, the square metre of bacteria removal surface is calculated. The CF-35 drum filter is available in both pump and gravity versions. Even if you have a gravity version, it is possible to convert it to a pump version in just a few steps (if you need help with this, we will be happy to assist you). Instructions for the conversion are enclosed with the control box. The fuse function or the emergency lid switch switches off the immersion UVCs directly when the lid is opened. The function is only guaranteed if they are connected via the supplied control unit. It is recommended that the electrical connection of the control unit is protected by a residual current circuit breaker. The control unit should not be directly exposed to moisture. Suitable connection accessories would be Elastomer sleeve 110mm, Elastomer end caps 110mm (if you do not need all inlets and outlets). As UV lamp we recommend our submersible UVC 40 W Amalgan or Immersion UVC 80 W Amalgam. Due to the use of deep well pumps, a flushing process is hardly audible. Additional options - different filter panels (filter mesh) in stainless steel RVS available to order and at extra cost in 43µ or 60µ (please note that with finer mesh the flow rate is 30% to 50% lower depending on the µ-thickness) - our EPS drum filters can be built individually on request according to drawings at an extra charge - individual biochambers (round or square) as well as trickle filters can be built on request in all sizes according to drawings - if you would like individual advice, please feel free to call us on 02945 / 96950 Functions of the control system: - Plug place for circulation and rinsing pump - plug and play via sensor with measuring pins  - automatic cleaning - Switch for on/off incl. emergency switch - Button for manual flushing - Flushing is triggered by probes (level of probes adjustable) - Rotation time/flush time adjustable - CE mark - detailed instructions for use are included - Cleaning is adjustable ( time and duration ) - Dry-running protection for the pond pump - Dry-running protection for circulation and flushing pump - Connections for sensor and safety switch Why EPS drum filters? after 30 years of experience and many purchased and self-tested filter systems from different suppliers, we decided to build our own drum filter series. There are stainless steel, PE and PP drum filters on the market. Some of the stainless steel filters were notable for their poor workmanship (cheap tank connectors that leaked, broke off or had rust defects). PE filters caused big problems when exposed to sunlight (bending and warping of the material) Many drum filters do not have a direct drive and are driven by pinions, V-belts or toothed belts. In our opinion, these are all weak points that can lead to malfunctions. For these reasons, we decided to build PP filters that do not deform, are acid-resistant and are operated with a direct drive. After an intensive test period of approx. 6 years in our own KOI facility, which consists of approx. 60 tanks of various sizes, with full fish stocking and abundant feeding every day, we started series production. All the problems mentioned are now a thing of the past - We love clear water and healthy fish EPS drum filters reduce the need for cleaning and maintenance in fish farms and garden ponds to a minimum. The processing is carried out using the latest technology such as CNC machines, which guarantees quality and precision. The systems can be used in the koi and/or swimming pond sector as well as in fish farming, industry and public areas.Dispatch by one-way pallet 220x100x80The new control system is preset ex works with a water-saving function, whereby the first contact at the probes causes the drum to rotate half a turn without rinsing. At the second contact on the probes, the drum is rotated a full revolution and cleaned completely. This reduces electricity and water consumption. You can convince yourself of the quality at any time in our showroom We look forward to your visit

Function Due to the high demand, the CF drum filter was built with an integrated pump chamber, biochamber and integrated flushing pump. This means that this drum filter has a plug and play system. On request, we can equip the filter with a submersible UVC and a pond pump according to your wishes. The function of the drum filter is to filter polluted water mechanically. Smallest particles are separated from the water by a stainless steel screen RVS 316 of 75 micrometres and led to the outside via a dirt drain This filtering process is automatically regulated by a control system and monitored by probes. In the event of a malfunction, the filter automatically switches off the circulation and backwash pump. The water level is constantly monitored by probes. The EPS Combi Drum Filter CF-35 is made of very high quality PP plastic and is supplied including control, emergency cover switch, manual channel flushing, complete piping from the flushing pump to the flushing channel, level regulator, cover and built-in flushing pump in an unprecedented price/performance ratio. All inclusive. All EPS drum filters are reinforced with a 50/50 U-profile and an inner core of 40/40 4 Kant steel pipe. The direct drive from the motor to the drum eliminates wear parts such as V-belts, toothed belts or plastic gears. If the dirty water channel should ever become clogged due to strong filamentous algae or leaves, it is no problem to simply dismantle and clean it without having to remove the filter drum or the mesh. In the integrated biochamber ( x  x  cm ) a Japanese air hose ( 19 mm ) is directly pre-installed for a better "moving bed" process for improved turbulence of the HX 13/17. This requires a diaphragm pump of 100-120 L/min. We recommend either HAP series, the Secoh series or the AP series. In addition, the biochamber has been equipped with 8 mm slots to insert HX13/17.  Please note the protected and unprotected surface of the HX13/17. According to this, the square metre of bacteria removal surface is calculated. The CF-35 drum filter is available in both pump and gravity versions. Even if you have a gravity version, it is possible to convert it to a pump version in just a few steps (if you need help with this, we will be happy to assist you). Instructions for the conversion are enclosed with the control box. The fuse function or the emergency lid switch switches off the immersion UVCs directly when the lid is opened. The function is only guaranteed if they are connected via the supplied control unit. It is recommended that the electrical connection of the control unit is protected by a residual current circuit breaker. The control unit should not be directly exposed to moisture. Suitable connection accessories would be Elastomer sleeve 110mm, Elastomer end caps 110mm (if you do not need all inlets and outlets). As UV lamp we recommend our submersible UVC 40 W Amalgan or Immersion UVC 80 W Amalgam. Due to the use of deep well pumps, a flushing process is hardly audible. Additional options - different filter panels (filter mesh) in stainless steel RVS available to order and at extra cost in 43µ or 60µ (please note that with finer mesh the flow rate is 30% to 50% lower depending on the µ-thickness) - our EPS drum filters can be built individually on request according to drawings at an extra charge - individual biochambers (round or square) as well as trickle filters can be built on request in all sizes according to drawings - if you would like individual advice, please feel free to call us on 02945 / 96950 Functions of the control system: - Plug place for circulation and rinsing pump - plug and play via sensor with measuring pins  - automatic cleaning - Switch for on/off incl. emergency switch - Button for manual flushing - Flushing is triggered by probes (level of probes adjustable) - Rotation time/flush time adjustable - CE mark - detailed instructions for use are included - Cleaning is adjustable ( time and duration ) - Dry-running protection for the pond pump - Dry-running protection for circulation and flushing pump - Connections for sensor and safety switch Why EPS drum filters? after 30 years of experience and many purchased and self-tested filter systems from different suppliers, we decided to build our own drum filter series. There are stainless steel, PE and PP drum filters on the market. Some of the stainless steel filters were notable for their poor workmanship (cheap tank connectors that leaked, broke off or had rust defects). PE filters caused big problems when exposed to sunlight (bending and warping of the material) Many drum filters do not have a direct drive and are driven by pinions, V-belts or toothed belts. In our opinion, these are all weak points that can lead to malfunctions. For these reasons, we decided to build PP filters that do not deform, are acid-resistant and are operated with a direct drive. After an intensive test period of approx. 6 years in our own KOI facility, which consists of approx. 60 tanks of various sizes, with full fish stocking and abundant feeding every day, we started series production. All the problems mentioned are now a thing of the past - We love clear water and healthy fish EPS drum filters reduce the need for cleaning and maintenance in fish farms and garden ponds to a minimum. The processing is carried out using the latest technology such as CNC machines, which guarantees quality and precision. The systems can be used in the koi and/or swimming pond sector as well as in fish farming, industry and public areas.Dispatch by one-way pallet 220x100x80The new control system is preset ex works with a water-saving function, whereby the first contact at the probes causes the drum to rotate half a turn without rinsing. At the second contact on the probes, the drum is rotated a full revolution and cleaned completely. This reduces electricity and water consumption. You can convince yourself of the quality at any time in our showroom We look forward to your visit

Function The function of the drum filter is to filter polluted water mechanically. Smallest particles are separated from the water by a stainless steel screen RVS 316 of 75 micrometres and led to the outside via a dirt drain. This filtering process is automatically regulated by a control system and monitored by probes. In the event of a malfunction, the filter automatically switches off the circulation and backwash pump. The water level is constantly monitored by a level controller. The EPS PP-100 drum filter is made of very high quality PP plastic and is supplied including control unit, level controller, cover, channel flushing, built-in flushing pump, direct drive and additional sockets for UVC and a second pump in an unprecedented price/performance ratio. The advantage of the EPS PP-100 is that by turning over a ball valve and pressing the test button "Flush", the gutter flushing is activated and thus cleaned of leaves, thread algae, etc. The EPS PP-100 drum filter is available in both pump and gravity versions. If installation is desired, please contact us so that we or one of our partners can respond to your individual wishes. Suitable connection accessories would be elastomer socket 110mm, elastomer end caps 110mm (if you do not need all inlets and outlets). As UV lamp we recommend our UVC 80W Amalgam.   Additional options - different filter panels (filter mesh) in stainless steel RVS available on order in 43µ or 60µ (please note that with finer meshes the flow rate is 30% to 50% lower depending on the µ-thickness) - our EPS drum filters can also be custom-built to different dimensions and pipe connections according to drawings - control cable, as well as connection cable for 220V (standard 2.5m) can be extended for an extra charge If you would like individual advice, please feel free to call us on 02945 / 96950 Functions of the control unit: - Plug location for circulation and rinsing pump - Plug and Play via sensor with measuring pins  - automatic cleaning - Switch for on/off incl. emergency switch - Button for manual flushing - Flushing is triggered by probes (level of probes adjustable) - Rotation time/ rinsing time adjustable - CE mark - Detailed instructions for use are included - Cleaning is adjustable ( time and duration ) - Dry-running protection for the pond pump - Dry-running protection for circulation and rinsing pump - Connections for sensor and safety switch Why EPS drum filters? after 30 years of experience and many purchased and self-tested filter systems from different suppliers, we decided to build our own drum filter series. There are stainless steel, PE and PP drum filters on the market. Some of the stainless steel filters were notable for their poor workmanship (cheap tank connectors that leaked, broke off or had rust defects). PE filters caused big problems when exposed to sunlight (bending and warping of the material) Many drum filters do not have a direct drive and are driven by pinions, V-belts or toothed belts. The use of salt also became problematic. In our view, these are all weak points that can lead to malfunctions. For these reasons, we decided to build PP filters that do not deform, are acid-resistant and are operated with a direct drive. After an intensive test period of approx. 6 years in our own KOI facility, which consists of approx. 60 tanks of various sizes, with full fish stocking and abundant feeding every day, we started series production. All the problems mentioned are now a thing of the past - We love clear water and healthy fish EPS drum filters reduce the need for cleaning and maintenance in fish farms and garden ponds to a minimum. The processing is carried out using the latest technology such as CNC machines, which guarantees quality and precision. The systems can be used in the koi and/or swimming pond sector as well as in fish farming, industry and public areas. The new control system is pre-set in the factory with a water-saving function, whereby the first contact at the probes causes the drum to rotate half a turn without rinsing. At the second contact on the probes, the drum is rotated a full revolution and cleaned completely. This reduces electricity and water consumption.Dispatch by Euro pallet 140x100x100 cm.You can convince yourself of the quality at any time in our showroom We are looking forward to your visit  

Function The function of the drum filter is to filter polluted water mechanically. Smallest particles are separated from the water by a stainless steel screen RVS 316 of 75 micrometres and led to the outside via a dirt drain. This filtering process is automatically regulated by a control system and monitored by probes. In the event of a malfunction, the filter automatically switches off the circulation and backwash pump. The water level is constantly monitored by a level controller. The EPS PP-100 drum filter is made of very high quality PP plastic and is supplied including control unit, level controller, cover, channel flushing, built-in flushing pump, direct drive and additional sockets for UVC and a second pump in an unprecedented price/performance ratio. The advantage of the EPS PP-100 is that by turning over a ball valve and pressing the test button "Flush", the gutter flushing is activated and thus cleaned of leaves, thread algae, etc. The EPS PP-100 drum filter is available in both pump and gravity versions. If installation is desired, please contact us so that we or one of our partners can respond to your individual wishes. Suitable connection accessories would be elastomer socket 110mm, elastomer end caps 110mm (if you do not need all inlets and outlets). As UV lamp we recommend our UVC 80W Amalgam.   Additional options - different filter panels (filter mesh) in stainless steel RVS available on order in 43µ or 60µ (please note that with finer meshes the flow rate is 30% to 50% lower depending on the µ-thickness) - our EPS drum filters can also be custom-built to different dimensions and pipe connections according to drawings - control cable, as well as connection cable for 220V (standard 2.5m) can be extended for an extra charge If you would like individual advice, please feel free to call us on 02945 / 96950 Functions of the control unit: - Plug location for circulation and rinsing pump - Plug and Play via sensor with measuring pins  - automatic cleaning - Switch for on/off incl. emergency switch - Button for manual flushing - Flushing is triggered by probes (level of probes adjustable) - Rotation time/ rinsing time adjustable - CE mark - Detailed instructions for use are included - Cleaning is adjustable ( time and duration ) - Dry-running protection for the pond pump - Dry-running protection for circulation and rinsing pump - Connections for sensor and safety switch Why EPS drum filters? after 30 years of experience and many purchased and self-tested filter systems from different suppliers, we decided to build our own drum filter series. There are stainless steel, PE and PP drum filters on the market. Some of the stainless steel filters were notable for their poor workmanship (cheap tank connectors that leaked, broke off or had rust defects). PE filters caused big problems when exposed to sunlight (bending and warping of the material) Many drum filters do not have a direct drive and are driven by pinions, V-belts or toothed belts. The use of salt also became problematic. In our view, these are all weak points that can lead to malfunctions. For these reasons, we decided to build PP filters that do not deform, are acid-resistant and are operated with a direct drive. After an intensive test period of approx. 6 years in our own KOI facility, which consists of approx. 60 tanks of various sizes, with full fish stocking and abundant feeding every day, we started series production. All the problems mentioned are now a thing of the past - We love clear water and healthy fish EPS drum filters reduce the need for cleaning and maintenance in fish farms and garden ponds to a minimum. The processing is carried out using the latest technology such as CNC machines, which guarantees quality and precision. The systems can be used in the koi and/or swimming pond sector as well as in fish farming, industry and public areas. The new control system is pre-set in the factory with a water-saving function, whereby the first contact at the probes causes the drum to rotate half a turn without rinsing. At the second contact on the probes, the drum is rotated a full revolution and cleaned completely. This reduces electricity and water consumption.Dispatch by Euro pallet 140x100x100 cm.You can convince yourself of the quality at any time in our showroom We are looking forward to your visit  

NeuerungenAufgrund der hohen Nachfrage haben wir nun einen Combi-Trommelfilter CF35 quer konstruiert wo die Ein- und Abläufe alle von einer Seite bedient werden können (von vorne). In diesem Filter ist die Trommel serienmäßig links montiert. Für eine rechts montierte Trommel sprechen Sie uns bitte an, damit wir Ihren Umbauwünschen entsprechen können (bitte beachten Sie, dass durch diese Sonderanfertigung die Lieferzeit 3-4 Wochen beträgt). Aufgrund dieser Vielfalt können unsere CF Combi-Trommelfilter ohne Probleme in jede Filterkammer eingebaut werden.Funktion Trommelfilter / Drum Filter Die Funktion des Trommelfilters ist es, belastetes Wasser mechanisch zu filtern. Durch ein Edelstahlsieb RVS 316 von 100 Mikrometer werden Kleinstpartikel vom Wasser getrennt und über einen Schmutzablauf nach Außen geführt. Dieser Filterprozess wird über eine Steuerung automatisch geregelt und von Sonden überwacht. Bei einer Fehlfunktion schaltet der Filter automatisch Umwälz- und Rückspülpumpe ab. Der Wasserstand wird ständig von Sonden überwacht. Der EPS Combi-Trommelfilter CF35 quer ist sehr hochwertig aus PP Kunststoff verarbeitet und wird inklusive Steuerung, Notausdeckelschalter, manueller Rinnenspülung, kompletter Verrohrung von der Spülpumpe bis zur Spülrinne, Niveauregler, Deckel und eingebauter Spülpumpe in einem noch nie dagewesenen Preis/Leistungsverhältnis geliefert. Alle Trommelfilter von EPS haben eine Verstärkung mit einem 50/50 U- Profil sowie einem Innenkern aus 40/40 4 Kant Stahlrohr. Durch den Direktantrieb vom Motor zur Trommel fallen Verschleißteile wie bei herkömmlichen Trommelfiltern (Keilriemen, Zahnriemen oder Kunststoffzahnräder) weg. Falls die Schmutzwasserrinne durch starkes Fadenalgenvorkommen oder Blätter einmal verstopfen sollte, ist es kein Problem diese einfach zu demontieren und zu reinigen ohne die Filtertrommel auszubauen oder das Gewebe zu entfernen. In der integrierten JUMBO-Biokammer (1400 x 1200 x 980 mm abzüglich 460 x 325 mm für Pumpenkammer) ist direkt ein japanischer Luftschlauch (19 mm) für ein besseres "moving bed" Verfahren zwecks verbesserter Verwirbelung der HX 13/17 vorinstalliert. Hierzu wird eine Membranpumpe von 100-120 L/min benötigt. Wir empfehlen entweder die HAP-Serie, die Secoh-Serie oder die AP-Serie. Zudem wurde die Biokammer mit 8 mm Schlitzen ausgestattet um HX 13/17 einzusetzen.  Bitte beachten Sie bei den HX 13/17 die geschützte und ungeschützte Oberfläche. Danach wird die Quadratmeter Abbaufläche für Bakterien berechnet. Der EPS Combi-Trommelfilter CF35 quer ist sowohl als Pump- sowie als Schwerkraftversion lieferbar. Auch wenn Sie eine Schwerkraftversion besitzen, ist es mit wenigen Handgriffen möglich, diese auf Pumpversion umzubauen (wenn Sie hierzu Hilfe benötigen, stehen wir Ihnen gerne zur Verfügung). Eine Umbauanleitung für den Umbau liegt dem Steuerungskasten bei. Durch die Sicherungsfunktion bzw. den Notausdeckelschalter werden die Tauch UVCs direkt abgeschaltet wenn der Deckel geöffnet wird. Die Funktion ist nur gewährleistet wenn diese über die mitgelieferte Steuerung angeschlossen werden. Es ist empfehlenswert den elektrischen Anschluss der Steuerung mit einem FI- Schutzschalter abzusichern. Die Steuerung sollte nicht direkt Feuchtigkeit ausgesetzt werden. Passendes Anschlusszubehör wären Elastomer-Muffe 110 mm, Elastomer-Endkappe 110 mm (falls Sie nicht alle Ein- und Ausläufe benötigen). Als UV-Lampe empfehlen wir unsere Tauch UVC 40 W Amalgam oder Tauch UVC 80 W Amalgam. Durch den Einsatz von Tiefbrunnenpumpen ist eine Spülvorgang kaum hörbar. Zusätzliche Optionen: • unterschiedliche Filter-Paneele (Filtergewebe) in Edelstahl RVS auf Bestellung und gegen Aufpreis erhältlich (bitte beachten Sie, dass bei feineren Geweben die Durchflussrate um 30% bis 50% je nach µ-Stärke geringer ist) • unsere EPS-Trommelfilter können auf Wunsch individuell nach Zeichnung gegen Aufpreis gebaut werden • individuelle Biokammern (rund oder eckig) sowie Rieselfilter können auf Wunsch in allen Größen nach Zeichnung gebaut werden • falls Sie eine individuelle Beratung wünschen, können Sie uns gerne anrufen ☎️02945 / 96950 Funktionen der Steuerung: • Steckerplatz für Umwälz- und Spülpumpe • Plug and Play über einen Sensor (Messsonden) • automatische Reinigung • Schalter für Ein-/Aus inkl. Notschalter • Taste für manuelles Spülen • Die Spülungen werden durch Sonden ausgelöst (Niveau der Sonden verstellbar) • Drehzeit / Spülzeit einstellbar • CE Konformitätserklärung wird mitgeliefert • ausführliche Gebrauchs- / Bedienungsanleitung wird mitgeliefert (deutsch oder englisch) • Aufstell- / Einbauanleitung wird mitgeliefert (deutsch oder englisch) • Reinigung ist einstellbar (Zeit und Dauer) • Trockenlaufschutz für die Teichpumpe • Trockenlaufschutz für Umwälz- und Spülpumpe • Anschlüsse für Fühler und Sicherheitsschalter • alle Steckdosen sind einzeln abgesichert (5/10 A mit außenliegenden Sicherungen) Warum EPS- Trommelfilter? aus 30 jähriger Erfahrung und vielen gekauften und selbst getesteten Filtersystemen von unterschiedlichen Anbietern haben wir uns entschlossen eine eigene Trommelfilterserie zu bauen. Es gibt auf dem Markt Trommelfilter aus Edelstahl, Polyethylen (PE) sowie Polypropylen (PP). Die Edelstahlfilter sind teilweise durch schlechte Verarbeitung (billige Tank Connectoren, die undicht waren, abbrachen oder Rostmängel aufwiesen) aufgefallen. PE Filter verursachten große Probleme bei Sonneneinstrahlung (Verbiegen und Verziehen des Materials). Viele Trommelfilter haben keinen Direktantrieb und werden über Ritzel, Keil- oder Zahnriemen angetrieben. Dies alles sind aus unsere Sicht Schwachpunkte, die zu Störungen führen können. Aus diesen Gründen haben wir uns entschlossen PP- Filter zu bauen die sich nicht verformen, säurefest sind und mit einem Direktantrieb betrieben werden. Nach einer intensiven Testzeit von ca. 6 Jahren in unserer eigenen KOI- Anlage, die aus ca. 60 Becken unterschiedlichster Größe besteht sowie bei vollem Fischbesatz und üppiger Fütterung täglich, haben wir die Serienproduktion aufgenommen. Alle genannten Probleme gehören nun der Vergangenheit an - Wir lieben klares Wasser und gesunde Fische - EPS Trommelfilter reduzieren den Reinigungs- und Wartungseinsatz bei Fischzuchten und Gartenteichen auf ein Minimum. Die Verarbeitung erfolgt über modernste Technologie wie CNC- Maschinen, wodurch Qualität und Präzision gewährleistet sind. Die Anlagen können im Koi- und/oder Schwimmteichbereich sowie bei der Fischzucht, in der Industrie und öffentlichen Bereichen eingesetzt werden.🚚 Versand per EinwegpaletteSie können sich jederzeit von der Qualität in unsere Ausstellung überzeugen. Wir freuen uns auf Ihren Besuch 😊

NeuerungenAufgrund der hohen Nachfrage haben wir nun einen Combi-Trommelfilter CF35 quer konstruiert wo die Ein- und Abläufe alle von einer Seite bedient werden können (von vorne). In diesem Filter ist die Trommel serienmäßig links montiert. Für eine rechts montierte Trommel sprechen Sie uns bitte an, damit wir Ihren Umbauwünschen entsprechen können (bitte beachten Sie, dass durch diese Sonderanfertigung die Lieferzeit 3-4 Wochen beträgt). Aufgrund dieser Vielfalt können unsere CF Combi-Trommelfilter ohne Probleme in jede Filterkammer eingebaut werden.Funktion Trommelfilter / Drum Filter Die Funktion des Trommelfilters ist es, belastetes Wasser mechanisch zu filtern. Durch ein Edelstahlsieb RVS 316 von 100 Mikrometer werden Kleinstpartikel vom Wasser getrennt und über einen Schmutzablauf nach Außen geführt. Dieser Filterprozess wird über eine Steuerung automatisch geregelt und von Sonden überwacht. Bei einer Fehlfunktion schaltet der Filter automatisch Umwälz- und Rückspülpumpe ab. Der Wasserstand wird ständig von Sonden überwacht. Der EPS Combi-Trommelfilter CF35 quer ist sehr hochwertig aus PP Kunststoff verarbeitet und wird inklusive Steuerung, Notausdeckelschalter, manueller Rinnenspülung, kompletter Verrohrung von der Spülpumpe bis zur Spülrinne, Niveauregler, Deckel und eingebauter Spülpumpe in einem noch nie dagewesenen Preis/Leistungsverhältnis geliefert. Alle Trommelfilter von EPS haben eine Verstärkung mit einem 50/50 U- Profil sowie einem Innenkern aus 40/40 4 Kant Stahlrohr. Durch den Direktantrieb vom Motor zur Trommel fallen Verschleißteile wie bei herkömmlichen Trommelfiltern (Keilriemen, Zahnriemen oder Kunststoffzahnräder) weg. Falls die Schmutzwasserrinne durch starkes Fadenalgenvorkommen oder Blätter einmal verstopfen sollte, ist es kein Problem diese einfach zu demontieren und zu reinigen ohne die Filtertrommel auszubauen oder das Gewebe zu entfernen. In der integrierten JUMBO-Biokammer (1400 x 1200 x 980 mm abzüglich 460 x 325 mm für Pumpenkammer) ist direkt ein japanischer Luftschlauch (19 mm) für ein besseres "moving bed" Verfahren zwecks verbesserter Verwirbelung der HX 13/17 vorinstalliert. Hierzu wird eine Membranpumpe von 100-120 L/min benötigt. Wir empfehlen entweder die HAP-Serie, die Secoh-Serie oder die AP-Serie. Zudem wurde die Biokammer mit 8 mm Schlitzen ausgestattet um HX 13/17 einzusetzen.  Bitte beachten Sie bei den HX 13/17 die geschützte und ungeschützte Oberfläche. Danach wird die Quadratmeter Abbaufläche für Bakterien berechnet. Der EPS Combi-Trommelfilter CF35 quer ist sowohl als Pump- sowie als Schwerkraftversion lieferbar. Auch wenn Sie eine Schwerkraftversion besitzen, ist es mit wenigen Handgriffen möglich, diese auf Pumpversion umzubauen (wenn Sie hierzu Hilfe benötigen, stehen wir Ihnen gerne zur Verfügung). Eine Umbauanleitung für den Umbau liegt dem Steuerungskasten bei. Durch die Sicherungsfunktion bzw. den Notausdeckelschalter werden die Tauch UVCs direkt abgeschaltet wenn der Deckel geöffnet wird. Die Funktion ist nur gewährleistet wenn diese über die mitgelieferte Steuerung angeschlossen werden. Es ist empfehlenswert den elektrischen Anschluss der Steuerung mit einem FI- Schutzschalter abzusichern. Die Steuerung sollte nicht direkt Feuchtigkeit ausgesetzt werden. Passendes Anschlusszubehör wären Elastomer-Muffe 110 mm, Elastomer-Endkappe 110 mm (falls Sie nicht alle Ein- und Ausläufe benötigen). Als UV-Lampe empfehlen wir unsere Tauch UVC 40 W Amalgam oder Tauch UVC 80 W Amalgam. Durch den Einsatz von Tiefbrunnenpumpen ist eine Spülvorgang kaum hörbar. Zusätzliche Optionen: • unterschiedliche Filter-Paneele (Filtergewebe) in Edelstahl RVS auf Bestellung und gegen Aufpreis erhältlich (bitte beachten Sie, dass bei feineren Geweben die Durchflussrate um 30% bis 50% je nach µ-Stärke geringer ist) • unsere EPS-Trommelfilter können auf Wunsch individuell nach Zeichnung gegen Aufpreis gebaut werden • individuelle Biokammern (rund oder eckig) sowie Rieselfilter können auf Wunsch in allen Größen nach Zeichnung gebaut werden • falls Sie eine individuelle Beratung wünschen, können Sie uns gerne anrufen ☎️02945 / 96950 Funktionen der Steuerung: • Steckerplatz für Umwälz- und Spülpumpe • Plug and Play über einen Sensor (Messsonden) • automatische Reinigung • Schalter für Ein-/Aus inkl. Notschalter • Taste für manuelles Spülen • Die Spülungen werden durch Sonden ausgelöst (Niveau der Sonden verstellbar) • Drehzeit / Spülzeit einstellbar • CE Konformitätserklärung wird mitgeliefert • ausführliche Gebrauchs- / Bedienungsanleitung wird mitgeliefert (deutsch oder englisch) • Aufstell- / Einbauanleitung wird mitgeliefert (deutsch oder englisch) • Reinigung ist einstellbar (Zeit und Dauer) • Trockenlaufschutz für die Teichpumpe • Trockenlaufschutz für Umwälz- und Spülpumpe • Anschlüsse für Fühler und Sicherheitsschalter • alle Steckdosen sind einzeln abgesichert (5/10 A mit außenliegenden Sicherungen) Warum EPS- Trommelfilter? aus 30 jähriger Erfahrung und vielen gekauften und selbst getesteten Filtersystemen von unterschiedlichen Anbietern haben wir uns entschlossen eine eigene Trommelfilterserie zu bauen. Es gibt auf dem Markt Trommelfilter aus Edelstahl, Polyethylen (PE) sowie Polypropylen (PP). Die Edelstahlfilter sind teilweise durch schlechte Verarbeitung (billige Tank Connectoren, die undicht waren, abbrachen oder Rostmängel aufwiesen) aufgefallen. PE Filter verursachten große Probleme bei Sonneneinstrahlung (Verbiegen und Verziehen des Materials). Viele Trommelfilter haben keinen Direktantrieb und werden über Ritzel, Keil- oder Zahnriemen angetrieben. Dies alles sind aus unsere Sicht Schwachpunkte, die zu Störungen führen können. Aus diesen Gründen haben wir uns entschlossen PP- Filter zu bauen die sich nicht verformen, säurefest sind und mit einem Direktantrieb betrieben werden. Nach einer intensiven Testzeit von ca. 6 Jahren in unserer eigenen KOI- Anlage, die aus ca. 60 Becken unterschiedlichster Größe besteht sowie bei vollem Fischbesatz und üppiger Fütterung täglich, haben wir die Serienproduktion aufgenommen. Alle genannten Probleme gehören nun der Vergangenheit an - Wir lieben klares Wasser und gesunde Fische - EPS Trommelfilter reduzieren den Reinigungs- und Wartungseinsatz bei Fischzuchten und Gartenteichen auf ein Minimum. Die Verarbeitung erfolgt über modernste Technologie wie CNC- Maschinen, wodurch Qualität und Präzision gewährleistet sind. Die Anlagen können im Koi- und/oder Schwimmteichbereich sowie bei der Fischzucht, in der Industrie und öffentlichen Bereichen eingesetzt werden.🚚 Versand per EinwegpaletteSie können sich jederzeit von der Qualität in unsere Ausstellung überzeugen. Wir freuen uns auf Ihren Besuch 😊

InnovationsDue to the high demand, we have now designed a CL65 transverse where the inlets and outlets can all be operated from one side (from the front).This filter is available in 2 versions, one drum on the left and one drum on the right.Due to this diversity, our CL drum filters can be installed in any filter chamber without any problems.This filter does not have a baffle for the biomaterial to the outlet.Please do not hesitate to contact us if you have any questions.Function:The function of the drum filter is to filter polluted water mechanically. Smallest particles are separated from the water by a stainless steel sieve RVS 316 of 75 micrometres and led to the outside via a dirt drain. This filtering process is automatically regulated by a control system and monitored by probes. In the event of a malfunction, the filter automatically switches off the circulation and backwash pump. The water level is constantly monitored by probes. The EPS Combi Drum Filter CL65 is made of very high quality PP plastic and is supplied including control, emergency cover switch, manual channel flushing, complete piping from the flushing pump to the flushing channel, level regulator, cover and built-in flushing pump in an unprecedented price/performance ratio. All EPS drum filters are reinforced with a 50/50 U-profile and an inner core of 40/40 4 Kant steel pipe. The direct drive from the motor to the drum eliminates the need for wear parts such as V-belts, toothed belts or plastic gears found in conventional drum filters. If the dirty water channel should ever become clogged due to strong filamentous algae or leaves, it is no problem to simply dismantle and clean it without having to dismantle the filter drum or remove the mesh. In the integrated biochamber (105 x 87 x 97 cm), a Japanese air hose (19 mm) is directly pre-installed for a better "moving bed" process for improved turbulence of the HX 13/17. This requires a diaphragm pump of 100-120 L/min. We recommend either HAP series, the Secoh series or the AP series. Please note the protected and unprotected surface for the HX13/17. Then the square metre of bacteria removal area is calculated. The CL65 drum filter is available in both pump and gravity versions. Even if you have a gravity version, it is possible to convert it to a pump version in just a few steps (if you need help with this, we will be happy to assist you). Instructions for the conversion are enclosed with the control box. The fuse function or the emergency lid switch switches off the immersion UVCs directly when the lid is opened. The function is only guaranteed if they are connected via the supplied control unit. It is recommended that the electrical connection of the control unit is protected by a residual current circuit breaker. The control unit should not be directly exposed to moisture. Suitable connection accessories would be Elastomer sleeve 110mm, Elastomer end caps 110mm (if you do not need all inlets and outlets). As UV lamp we recommend our submersible UVC 40W Amalgan or Immersion UVC 80W Amalgam. Due to the use of deep well pumps, a flushing process is hardly audible. Additional options - different filter panels (filter mesh) in stainless steel RVS available to order and at extra cost in 43µ or 60µ (please note that with finer mesh the flow rate is 30% to 50% lower depending on the µ-thickness) - our EPS drum filters can be built individually according to drawing at extra charge - individual biochambers (round or square) as well as trickle filters can be built on request in all sizes according to drawings Functions of the control system: - Plug place for circulation and rinsing pump- Plug and Play via a sensor with measuring pins - automatic cleaning- Switch for on/off incl. emergency switch- Button for manual rinsing- The rinses are triggered by probes (level of the probes adjustable)- Rotation time/rinsing time adjustable- detailed operating instructions are included- Cleaning is adjustable ( time and duration )- Dry run protection for the pond pump- Dry run protection for circulation and rinsing pump- Connections for probes and safety showers Why EPS drum filters? after 30 years of experience and many purchased and self-tested filter systems from different suppliers, we decided to build our own drum filter series. There are stainless steel, PE and PP drum filters on the market. Some of the stainless steel filters were notable for their poor workmanship (cheap tank connectors that leaked, broke off or had rust defects). PE filters caused big problems when exposed to sunlight (bending and warping of the material) Many drum filters do not have a direct drive and are driven by pinions, V-belts or toothed belts. The use of salt also became problematic. In our view, these are all weak points that can lead to malfunctions. For these reasons, we decided to build PP filters that do not deform, are acid-resistant and are operated with a direct drive. After an intensive test period of approx. 6 years in our own KOI facility, which consists of approx. 60 tanks of various sizes, with full fish stocking and abundant feeding every day, we started series production. All these problems are now a thing of the past - We love clear water and healthy fish EPS drum filters reduce the need for cleaning and maintenance in fish farms and garden ponds to a minimum. The processing is carried out using the latest technology such as CNC machines, which guarantees quality and precision. The systems can be used in the koi and/or swimming pond sector as well as in fish farming, industry and public areas.Dispatch by one-way pallet 220x100x80You can convince yourself of the quality at any time in our exhibition We look forward to your visit

Function Due to the high demand, the TF -drum filter was built with an integrated pump chamber and integrated flushing pump. This means that this drum filter has a plug and play system. On request, we can equip the filter with a submersible UVC and a pond pump according to your wishes. The function of the drum filter is to filter polluted water mechanically. Smallest particles are separated from the water by a stainless steel screen RVS 316 of 75 micrometres and led to the outside via a dirt drain. This filtering process is automatically regulated by a control system and monitored by probes. In the event of a malfunction, the filter automatically switches off the circulation and backwash pump. The water level is constantly monitored by a level controller. The EPS TF65 drum filter is made of very high quality PP plastic and is supplied including control unit, level controller, emergency cover switch, cover, channel flushing, built-in flushing pump, direct drive, built-in punp chamber and additional sockets for UVC and a second pump in an unprecedented price/performance ratio. The advantage of the EPS TF65 is that by turning a ball valve and pressing the test button "Flush", the gutter flushing is activated and thus cleaned of foliage, thread algae etc. The filter also has a built-in pump chamber. In the gravity version, pond pumps can be connected directly in the filter. The adjustable Vario20.000 / 30.000 is recommended here  or a 60,000/70,000 tube pump. The EPS TF65 drum filter is available in both pump and gravity versions. Based on practical experience, the EPS TF65 drum filter has been modified from the PP65 and several features have been incorporated that are only available at extra cost with the PP65 or are not available at all. The EPS TF65 drum filter can also be supplied as a plug-in system complete with built-in submersible UVC and pond pump (power in each case as required). If installation is required, please contact us so that we or one of our partners can respond to your individual wishes. Suitable connection accessories would be elastomer sleeve 110mm , elastomer end caps 110mm (if you do not need all inlets and outlets). As UV lamp we recommend our submersible UVC 48W Amalgam.   Additional options - different filter panels (filter mesh) in stainless steel RVS available to order in 43µ or 60µ (please note that with finer mesh the flow rate is 30% to 50% lower depending on µ-thickness) - our EPS drum filters can also be custom-built to different dimensions and pipe connections according to drawings - control cable, as well as connection cable for 220V (standard 2.5m) can be extended for an extra charge   if you would like individual advice, please feel free to call us on 02945 / 96950   Functions of the control unit: - Plug location for circulation and rinsing pump - Plug and Play via sensor with measuring pins  - automatic cleaning - Switch for on/off incl. emergency switch - Button for manual flushing - Flushing is triggered by probes (level of probes adjustable) - Rotation time/ rinsing time adjustable - CE mark - Detailed instructions for use are included - Cleaning is adjustable ( time and duration ) - Dry-running protection for the pond pump - Dry-running protection for circulation and flushing pump - Connections for sensor and safety switch Why EPS drum filters? after 30 years of experience and many purchased and self-tested filter systems from different suppliers, we decided to build our own drum filter series. There are stainless steel, PE and PP drum filters on the market. Some of the stainless steel filters were notable for their poor workmanship (cheap tank connectors that leaked, broke off or had rust defects). PE filters caused big problems when exposed to sunlight (bending and warping of the material) Many drum filters do not have a direct drive and are driven by pinions, V-belts or toothed belts. The use of salt also became problematic. In our view, these are all weak points that can lead to malfunctions. For these reasons, we decided to build PP filters that do not deform, are acid-resistant and are operated with a direct drive. After an intensive test period of approx. 6 years in our own KOI facility, which consists of approx. 60 tanks of various sizes, with full fish stocking and abundant feeding every day, we started series production. All these problems are now a thing of the past - We love clear water and healthy fish EPS drum filters reduce the need for cleaning and maintenance in fish farms and garden ponds to a minimum. The processing is done with the most modern technology such as CNC machines, which guarantees quality and precision. The systems can be used in the koi and/or swimming pond sector as well as in fish farming, industry and public areas.The new control system is pre-set in the factory with a water-saving function, whereby the first contact at the probes causes the drum to rotate half a turn without rinsing. At the second contact on the probes, the drum is rotated a full revolution and cleaned completely. This reduces electricity and water consumption.You can convince yourself of the quality at any time in our showroom Shipment by Euro pallet 120x100x100 cmWe look forward to your visit  

Function Due to the high demand, the TF -drum filter was built with an integrated pump chamber and integrated flushing pump. This means that this drum filter has a plug and play system. On request, we can equip the filter with a submersible UVC and a pond pump according to your wishes. The function of the drum filter is to filter polluted water mechanically. Smallest particles are separated from the water by a stainless steel screen RVS 316 of 75 micrometres and led to the outside via a dirt drain. This filtering process is automatically regulated by a control system and monitored by probes. In the event of a malfunction, the filter automatically switches off the circulation and backwash pump. The water level is constantly monitored by a level controller. The EPS TF65 drum filter is made of very high quality PP plastic and is supplied including control unit, level controller, emergency cover switch, cover, channel flushing, built-in flushing pump, direct drive, built-in punp chamber and additional sockets for UVC and a second pump in an unprecedented price/performance ratio. The advantage of the EPS TF65 is that by turning a ball valve and pressing the test button "Flush", the gutter flushing is activated and thus cleaned of foliage, thread algae etc. The filter also has a built-in pump chamber. In the gravity version, pond pumps can be connected directly in the filter. The adjustable Vario20.000 / 30.000 is recommended here  or a 60,000/70,000 tube pump. The EPS TF65 drum filter is available in both pump and gravity versions. Based on practical experience, the EPS TF65 drum filter has been modified from the PP65 and several features have been incorporated that are only available at extra cost with the PP65 or are not available at all. The EPS TF65 drum filter can also be supplied as a plug-in system complete with built-in submersible UVC and pond pump (power in each case as required). If installation is required, please contact us so that we or one of our partners can respond to your individual wishes. Suitable connection accessories would be elastomer sleeve 110mm , elastomer end caps 110mm (if you do not need all inlets and outlets). As UV lamp we recommend our submersible UVC 48W Amalgam.   Additional options - different filter panels (filter mesh) in stainless steel RVS available to order in 43µ or 60µ (please note that with finer mesh the flow rate is 30% to 50% lower depending on µ-thickness) - our EPS drum filters can also be custom-built to different dimensions and pipe connections according to drawings - control cable, as well as connection cable for 220V (standard 2.5m) can be extended for an extra charge   if you would like individual advice, please feel free to call us on 02945 / 96950   Functions of the control unit: - Plug location for circulation and rinsing pump - Plug and Play via sensor with measuring pins  - automatic cleaning - Switch for on/off incl. emergency switch - Button for manual flushing - Flushing is triggered by probes (level of probes adjustable) - Rotation time/ rinsing time adjustable - CE mark - Detailed instructions for use are included - Cleaning is adjustable ( time and duration ) - Dry-running protection for the pond pump - Dry-running protection for circulation and flushing pump - Connections for sensor and safety switch Why EPS drum filters? after 30 years of experience and many purchased and self-tested filter systems from different suppliers, we decided to build our own drum filter series. There are stainless steel, PE and PP drum filters on the market. Some of the stainless steel filters were notable for their poor workmanship (cheap tank connectors that leaked, broke off or had rust defects). PE filters caused big problems when exposed to sunlight (bending and warping of the material) Many drum filters do not have a direct drive and are driven by pinions, V-belts or toothed belts. The use of salt also became problematic. In our view, these are all weak points that can lead to malfunctions. For these reasons, we decided to build PP filters that do not deform, are acid-resistant and are operated with a direct drive. After an intensive test period of approx. 6 years in our own KOI facility, which consists of approx. 60 tanks of various sizes, with full fish stocking and abundant feeding every day, we started series production. All these problems are now a thing of the past - We love clear water and healthy fish EPS drum filters reduce the need for cleaning and maintenance in fish farms and garden ponds to a minimum. The processing is done with the most modern technology such as CNC machines, which guarantees quality and precision. The systems can be used in the koi and/or swimming pond sector as well as in fish farming, industry and public areas.The new control system is pre-set in the factory with a water-saving function, whereby the first contact at the probes causes the drum to rotate half a turn without rinsing. At the second contact on the probes, the drum is rotated a full revolution and cleaned completely. This reduces electricity and water consumption.You can convince yourself of the quality at any time in our showroom Shipment by Euro pallet 120x100x100 cmWe look forward to your visit  

Function The function of the drum filter is to filter polluted water mechanically. Smallest particles are separated from the water by a stainless steel sieve RVS 316 of 75 micrometres and led to the outside via a dirt drain. This filtering process is automatically regulated by a control system and monitored by probes. In the event of a malfunction, the filter automatically switches off the circulation and backwash pump. The water level is constantly monitored by probes. The EPS Combi Drum Filter CL35 is made of very high quality PP plastic and is supplied including control, emergency cover switch, manual channel flushing, complete piping from the flushing pump to the flushing channel, level regulator, cover and built-in flushing pump in an unprecedented price/performance ratio. All inclusive. All EPS drum filters are reinforced with a 50/50 U-profile and an inner core of 40/40 4 Kant steel pipe. The direct drive from the motor to the drum means that there are no wear parts as with conventional drum filters (V-belts, toothed belts or plastic gears). If the waste water channel should ever become clogged due to strong filamentous algae or leaves, it is no problem to simply dismantle and clean it without having to remove the filter drum or the fabric. In the integrated biochamber (102 x 67 x 98 cm), a Japanese air hose ( 19 mm ) is directly pre-installed for a better "moving bed" process for improved turbulence of the HX 13/17. This requires a diaphragm pump of 100-120 L/min. We recommend either the HAP series, the Secoh series or the AP series. In addition, the biochamber has been equipped with 8mm slots to insert HX13/17.  Please note the protected and unprotected surface for the HX13/17. According to this, the square metre of bacteria removal surface is calculated. The CL35 drum filter is available in both pump and gravity versions. Even if you have a gravity version, it is possible to convert it to a pump version in just a few steps (if you need help with this, we will be happy to assist you). Instructions for the conversion are enclosed with the control box. The fuse function or the emergency lid switch switches off the immersion UVCs directly when the lid is opened. The function is only guaranteed if they are connected via the supplied control unit. It is recommended that the electrical connection of the control unit is protected by a residual current circuit breaker. The control unit should not be directly exposed to moisture. Suitable connection accessories would be elastomer sleeve 110mm, elastomer end caps 110mm (if you do not need all inlets and outlets). As UV lamp we recommend our submersible UVC 40W Amalgan or submersible UVC 80W Amalgam. By using deep well pumps a flushing process is hardly audible. Additional options - different filter panels (filter meshes) in stainless steel RVS available on order and at extra charge in 43µ or 60µ (please note that with finer meshes the flow rate is 30% to 50% lower depending on the µ-thickness) - our EPS drum filters can be built individually according to drawing at extra charge - individual biochambers (round or square) as well as trickle filters can be built on request in all sizes according to drawing - if you would like individual advice, please feel free to call us on 02945 / 96950 Functions of the control system: - Plug location for circulation and rinsing pump - Plug and Play via a sensor with measuring pins  - automatic cleaning - switch for on/off incl. emergency switch - Button for manual flushing - Flushing is triggered by probes (level of probes adjustable) - Rotation time/flush time adjustable - CE mark - detailed instructions for use are included - Cleaning is adjustable ( time and duration ) - Dry-running protection for the pond pump - Dry-running protection for circulation and flushing pump - Connections for sensor and safety switch Why EPS drum filters? after 30 years of experience and many purchased and self-tested filter systems from different suppliers, we decided to build our own drum filter series. There are stainless steel, PE and PP drum filters on the market. Some of the stainless steel filters were notable for their poor workmanship (cheap tank connectors that leaked, broke off or had rust defects). PE filters caused big problems when exposed to sunlight (bending and warping of the material) Many drum filters do not have a direct drive and are driven by pinions, V-belts or toothed belts. In our opinion, these are all weak points that can lead to malfunctions. For these reasons, we decided to build PP filters that do not deform, are acid-resistant and are operated with a direct drive. After an intensive test period of approx. 6 years in our own KOI facility, which consists of approx. 60 tanks of various sizes, with full fish stocking and abundant feeding every day, we started series production. All the above problems are now a thing of the past - We love clear water and healthy fish EPS drum filters reduce the need for cleaning and maintenance in fish farms and garden ponds to a minimum. The processing is carried out using the latest technology such as CNC machines, which guarantees quality and precision. The systems can be used in the koi and/or swimming pond sector as well as in fish farming, industry and public areas.Dispatch by one-way pallet 220x100x80NEW: Water-saving function via the intelligent controlThe new control is preset with a water-saving function ex works, whereby the drum rotates half a revolution without rinsing at the first contact with the probes. At the second contact on the probes, the drum is rotated a full revolution and cleaned completely. This reduces electricity and water consumption. You can see the quality for yourself at any time in our showroom. We look forward to your visit

Function The function of the drum filter is to filter polluted water mechanically. Smallest particles are separated from the water by a stainless steel sieve RVS 316 of 75 micrometres and led to the outside via a dirt drain. This filtering process is automatically regulated by a control system and monitored by probes. In the event of a malfunction, the filter automatically switches off the circulation and backwash pump. The water level is constantly monitored by probes. The EPS Combi Drum Filter CL35 is made of very high quality PP plastic and is supplied including control, emergency cover switch, manual channel flushing, complete piping from the flushing pump to the flushing channel, level regulator, cover and built-in flushing pump in an unprecedented price/performance ratio. All inclusive. All EPS drum filters are reinforced with a 50/50 U-profile and an inner core of 40/40 4 Kant steel pipe. The direct drive from the motor to the drum means that there are no wear parts as with conventional drum filters (V-belts, toothed belts or plastic gears). If the waste water channel should ever become clogged due to strong filamentous algae or leaves, it is no problem to simply dismantle and clean it without having to remove the filter drum or the fabric. In the integrated biochamber (102 x 67 x 98 cm), a Japanese air hose ( 19 mm ) is directly pre-installed for a better "moving bed" process for improved turbulence of the HX 13/17. This requires a diaphragm pump of 100-120 L/min. We recommend either the HAP series, the Secoh series or the AP series. In addition, the biochamber has been equipped with 8mm slots to insert HX13/17.  Please note the protected and unprotected surface for the HX13/17. According to this, the square metre of bacteria removal surface is calculated. The CL35 drum filter is available in both pump and gravity versions. Even if you have a gravity version, it is possible to convert it to a pump version in just a few steps (if you need help with this, we will be happy to assist you). Instructions for the conversion are enclosed with the control box. The fuse function or the emergency lid switch switches off the immersion UVCs directly when the lid is opened. The function is only guaranteed if they are connected via the supplied control unit. It is recommended that the electrical connection of the control unit is protected by a residual current circuit breaker. The control unit should not be directly exposed to moisture. Suitable connection accessories would be elastomer sleeve 110mm, elastomer end caps 110mm (if you do not need all inlets and outlets). As UV lamp we recommend our submersible UVC 40W Amalgan or submersible UVC 80W Amalgam. By using deep well pumps a flushing process is hardly audible. Additional options - different filter panels (filter meshes) in stainless steel RVS available on order and at extra charge in 43µ or 60µ (please note that with finer meshes the flow rate is 30% to 50% lower depending on the µ-thickness) - our EPS drum filters can be built individually according to drawing at extra charge - individual biochambers (round or square) as well as trickle filters can be built on request in all sizes according to drawing - if you would like individual advice, please feel free to call us on 02945 / 96950 Functions of the control system: - Plug location for circulation and rinsing pump - Plug and Play via a sensor with measuring pins  - automatic cleaning - switch for on/off incl. emergency switch - Button for manual flushing - Flushing is triggered by probes (level of probes adjustable) - Rotation time/flush time adjustable - CE mark - detailed instructions for use are included - Cleaning is adjustable ( time and duration ) - Dry-running protection for the pond pump - Dry-running protection for circulation and flushing pump - Connections for sensor and safety switch Why EPS drum filters? after 30 years of experience and many purchased and self-tested filter systems from different suppliers, we decided to build our own drum filter series. There are stainless steel, PE and PP drum filters on the market. Some of the stainless steel filters were notable for their poor workmanship (cheap tank connectors that leaked, broke off or had rust defects). PE filters caused big problems when exposed to sunlight (bending and warping of the material) Many drum filters do not have a direct drive and are driven by pinions, V-belts or toothed belts. In our opinion, these are all weak points that can lead to malfunctions. For these reasons, we decided to build PP filters that do not deform, are acid-resistant and are operated with a direct drive. After an intensive test period of approx. 6 years in our own KOI facility, which consists of approx. 60 tanks of various sizes, with full fish stocking and abundant feeding every day, we started series production. All the above problems are now a thing of the past - We love clear water and healthy fish EPS drum filters reduce the need for cleaning and maintenance in fish farms and garden ponds to a minimum. The processing is carried out using the latest technology such as CNC machines, which guarantees quality and precision. The systems can be used in the koi and/or swimming pond sector as well as in fish farming, industry and public areas.Dispatch by one-way pallet 220x100x80NEW: Water-saving function via the intelligent controlThe new control is preset with a water-saving function ex works, whereby the drum rotates half a revolution without rinsing at the first contact with the probes. At the second contact on the probes, the drum is rotated a full revolution and cleaned completely. This reduces electricity and water consumption. You can see the quality for yourself at any time in our showroom. We look forward to your visit

Function Due to the high demand, the TF -drum filter was built with an integrated pump chamber and integrated flushing pump. This means that this drum filter has a plug and play system. On request, we can equip the filter with a submersible UVC and a pond pump according to your wishes. The function of the drum filter is to filter polluted water mechanically. Smallest particles are separated from the water by a stainless steel screen RVS 316 of 75 micrometres and led to the outside via a dirt drain. This filtering process is automatically regulated by a control system and monitored by probes. In the event of a malfunction, the filter automatically switches off the circulation and backwash pump. The water level is constantly monitored by a level controller. The EPS TF35 drum filter is made of very high quality PP plastic and is supplied including control unit, level controller, emergency cover switch, cover, channel flushing, built-in flushing pump, direct drive, built-in punch chamber and additional sockets for UVC and a second pump in an unprecedented price/performance ratio. The advantage of the EPS TF35 is that by turning over a ball valve and pressing the test button "Flush", the gutter flushing is activated and thus cleaned of leaves, thread algae etc.. The filter also has a built-in pump chamber. In the gravity version, pond pumps can be connected directly in the filter. The adjustable Vario 20.000 / 30.000 is recommended here. The EPS TF35 drum filter is available in both pump and gravity versions. Based on practical experience, the EPS TF35 drum filter has been modified from the PP35 and several features have been incorporated that are only available at extra cost with the PP35 or are not available at all. The EPS TF35 drum filter can also be supplied as a plug-in system complete with built-in submersible UVC and pond pump (power in each case as required). If installation is required, please contact us so that we or one of our partners can respond to your individual wishes. Suitable connection accessories would be elastomer socket 110mm, elastomer end caps 110mm (if you do not need all inlets and outlets). As UV lamp we recommend our submersible UVC 40W Amalgam.   Additional options - different filter panels (filter mesh) in stainless steel RVS available to order in 43µ or 60µ (please note that with finer mesh the flow rate is 30% to 50% lower depending on the µ-thickness) - our EPS drum filters can also be custom-built to different dimensions and pipe connections according to drawings - control cable, as well as connection cable for 220V (standard 2.5m) can be extended for an extra charge   if you would like individual advice, please feel free to call us on 02945 / 96950   Functions of the control unit: - Plug location for circulation and rinsing pump - Plug and Play via sensor with measuring pins  - automatic cleaning - Switch for on/off incl. emergency switch - Button for manual flushing - Flushing is triggered by probes (level of probes adjustable) - Rotation time/ rinsing time adjustable - CE mark - Detailed instructions for use are included - Cleaning is adjustable ( time and duration ) - Dry-running protection for the pond pump - Dry-running protection for circulation and flushing pump - Connections for sensor and safety switch Why EPS drum filters? after 30 years of experience and many purchased and self-tested filter systems from different suppliers, we decided to build our own drum filter series. There are stainless steel, PE and PP drum filters on the market. Some of the stainless steel filters were notable for their poor workmanship (cheap tank connectors that leaked, broke off or had rust defects). PE filters caused big problems when exposed to sunlight (bending and warping of the material) Many drum filters do not have a direct drive and are driven by pinions, V-belts or toothed belts. In our view, these are all weak points that can lead to malfunctions. For these reasons, we decided to build PP filters that do not deform, are acid-resistant and are operated with a direct drive. After an intensive test period of approx. 6 years in our own KOI facility, which consists of approx. 60 tanks of various sizes, with full fish stocking and abundant feeding every day, we started series production. All the problems mentioned are now a thing of the past - We love clear water and healthy fish EPS drum filters reduce the need for cleaning and maintenance in fish farms and garden ponds to a minimum. The processing is carried out using the latest technology such as CNC machines, which guarantees quality and precision. The systems can be used in the koi and/or swimming pond sector as well as in fish farming, industry and public areas.The new control system is pre-set in the factory with a water-saving function, whereby the first contact at the probes causes the drum to rotate half a turn without rinsing. At the second contact on the probes, the drum is rotated a full revolution and cleaned completely. This reduces electricity and water consumption.Dispatch by Euro pallet 120x80x100You can convince yourself of the quality at any time in our showroom We look forward to your visit  

Function Due to the high demand, the TF -drum filter was built with an integrated pump chamber and integrated flushing pump. This means that this drum filter has a plug and play system. On request, we can equip the filter with a submersible UVC and a pond pump according to your wishes. The function of the drum filter is to filter polluted water mechanically. Smallest particles are separated from the water by a stainless steel screen RVS 316 of 75 micrometres and led to the outside via a dirt drain. This filtering process is automatically regulated by a control system and monitored by probes. In the event of a malfunction, the filter automatically switches off the circulation and backwash pump. The water level is constantly monitored by a level controller. The EPS TF35 drum filter is made of very high quality PP plastic and is supplied including control unit, level controller, emergency cover switch, cover, channel flushing, built-in flushing pump, direct drive, built-in punch chamber and additional sockets for UVC and a second pump in an unprecedented price/performance ratio. The advantage of the EPS TF35 is that by turning over a ball valve and pressing the test button "Flush", the gutter flushing is activated and thus cleaned of leaves, thread algae etc.. The filter also has a built-in pump chamber. In the gravity version, pond pumps can be connected directly in the filter. The adjustable Vario 20.000 / 30.000 is recommended here. The EPS TF35 drum filter is available in both pump and gravity versions. Based on practical experience, the EPS TF35 drum filter has been modified from the PP35 and several features have been incorporated that are only available at extra cost with the PP35 or are not available at all. The EPS TF35 drum filter can also be supplied as a plug-in system complete with built-in submersible UVC and pond pump (power in each case as required). If installation is required, please contact us so that we or one of our partners can respond to your individual wishes. Suitable connection accessories would be elastomer socket 110mm, elastomer end caps 110mm (if you do not need all inlets and outlets). As UV lamp we recommend our submersible UVC 40W Amalgam.   Additional options - different filter panels (filter mesh) in stainless steel RVS available to order in 43µ or 60µ (please note that with finer mesh the flow rate is 30% to 50% lower depending on the µ-thickness) - our EPS drum filters can also be custom-built to different dimensions and pipe connections according to drawings - control cable, as well as connection cable for 220V (standard 2.5m) can be extended for an extra charge   if you would like individual advice, please feel free to call us on 02945 / 96950   Functions of the control unit: - Plug location for circulation and rinsing pump - Plug and Play via sensor with measuring pins  - automatic cleaning - Switch for on/off incl. emergency switch - Button for manual flushing - Flushing is triggered by probes (level of probes adjustable) - Rotation time/ rinsing time adjustable - CE mark - Detailed instructions for use are included - Cleaning is adjustable ( time and duration ) - Dry-running protection for the pond pump - Dry-running protection for circulation and flushing pump - Connections for sensor and safety switch Why EPS drum filters? after 30 years of experience and many purchased and self-tested filter systems from different suppliers, we decided to build our own drum filter series. There are stainless steel, PE and PP drum filters on the market. Some of the stainless steel filters were notable for their poor workmanship (cheap tank connectors that leaked, broke off or had rust defects). PE filters caused big problems when exposed to sunlight (bending and warping of the material) Many drum filters do not have a direct drive and are driven by pinions, V-belts or toothed belts. In our view, these are all weak points that can lead to malfunctions. For these reasons, we decided to build PP filters that do not deform, are acid-resistant and are operated with a direct drive. After an intensive test period of approx. 6 years in our own KOI facility, which consists of approx. 60 tanks of various sizes, with full fish stocking and abundant feeding every day, we started series production. All the problems mentioned are now a thing of the past - We love clear water and healthy fish EPS drum filters reduce the need for cleaning and maintenance in fish farms and garden ponds to a minimum. The processing is carried out using the latest technology such as CNC machines, which guarantees quality and precision. The systems can be used in the koi and/or swimming pond sector as well as in fish farming, industry and public areas.The new control system is pre-set in the factory with a water-saving function, whereby the first contact at the probes causes the drum to rotate half a turn without rinsing. At the second contact on the probes, the drum is rotated a full revolution and cleaned completely. This reduces electricity and water consumption.Dispatch by Euro pallet 120x80x100You can convince yourself of the quality at any time in our showroom We look forward to your visit