PP drum filter

Function The function of the drum filter is to filter polluted water mechanically. Smallest particles are separated from the water by a stainless steel screen RVS 316 of 75 micrometres and led to the outside via a dirt drain. This filtering process is automatically regulated by a control system and monitored by probes. In the event of a malfunction, the filter automatically switches off the circulation and backwash pump. The water level is constantly monitored by a level controller. The EPS PP-100 drum filter is made of very high quality PP plastic and is supplied including control unit, level controller, cover, channel flushing, built-in flushing pump, direct drive and additional sockets for UVC and a second pump in an unprecedented price/performance ratio. The advantage of the EPS PP-100 is that by turning over a ball valve and pressing the test button "Flush", the gutter flushing is activated and thus cleaned of leaves, thread algae, etc. The EPS PP-100 drum filter is available in both pump and gravity versions. If installation is desired, please contact us so that we or one of our partners can respond to your individual wishes. Suitable connection accessories would be elastomer socket 110mm, elastomer end caps 110mm (if you do not need all inlets and outlets). As UV lamp we recommend our UVC 80W Amalgam.   Additional options - different filter panels (filter mesh) in stainless steel RVS available on order in 43µ or 60µ (please note that with finer meshes the flow rate is 30% to 50% lower depending on the µ-thickness) - our EPS drum filters can also be custom-built to different dimensions and pipe connections according to drawings - control cable, as well as connection cable for 220V (standard 2.5m) can be extended for an extra charge If you would like individual advice, please feel free to call us on 02945 / 96950 Functions of the control unit: - Plug location for circulation and rinsing pump - Plug and Play via sensor with measuring pins  - automatic cleaning - Switch for on/off incl. emergency switch - Button for manual flushing - Flushing is triggered by probes (level of probes adjustable) - Rotation time/ rinsing time adjustable - CE mark - Detailed instructions for use are included - Cleaning is adjustable ( time and duration ) - Dry-running protection for the pond pump - Dry-running protection for circulation and rinsing pump - Connections for sensor and safety switch Why EPS drum filters? after 30 years of experience and many purchased and self-tested filter systems from different suppliers, we decided to build our own drum filter series. There are stainless steel, PE and PP drum filters on the market. Some of the stainless steel filters were notable for their poor workmanship (cheap tank connectors that leaked, broke off or had rust defects). PE filters caused big problems when exposed to sunlight (bending and warping of the material) Many drum filters do not have a direct drive and are driven by pinions, V-belts or toothed belts. The use of salt also became problematic. In our view, these are all weak points that can lead to malfunctions. For these reasons, we decided to build PP filters that do not deform, are acid-resistant and are operated with a direct drive. After an intensive test period of approx. 6 years in our own KOI facility, which consists of approx. 60 tanks of various sizes, with full fish stocking and abundant feeding every day, we started series production. All the problems mentioned are now a thing of the past - We love clear water and healthy fish EPS drum filters reduce the need for cleaning and maintenance in fish farms and garden ponds to a minimum. The processing is carried out using the latest technology such as CNC machines, which guarantees quality and precision. The systems can be used in the koi and/or swimming pond sector as well as in fish farming, industry and public areas. The new control system is pre-set in the factory with a water-saving function, whereby the first contact at the probes causes the drum to rotate half a turn without rinsing. At the second contact on the probes, the drum is rotated a full revolution and cleaned completely. This reduces electricity and water consumption.Dispatch by Euro pallet 140x100x100 cm.You can convince yourself of the quality at any time in our showroom We are looking forward to your visit  

Function The function of the drum filter is to filter polluted water mechanically. Smallest particles are separated from the water by a stainless steel screen RVS 316 of 75 micrometres and led to the outside via a dirt drain. This filtering process is automatically regulated by a control system and monitored by probes. In the event of a malfunction, the filter automatically switches off the circulation and backwash pump. The water level is constantly monitored by a level controller. The EPS PP-100 drum filter is made of very high quality PP plastic and is supplied including control unit, level controller, cover, channel flushing, built-in flushing pump, direct drive and additional sockets for UVC and a second pump in an unprecedented price/performance ratio. The advantage of the EPS PP-100 is that by turning over a ball valve and pressing the test button "Flush", the gutter flushing is activated and thus cleaned of leaves, thread algae, etc. The EPS PP-100 drum filter is available in both pump and gravity versions. If installation is desired, please contact us so that we or one of our partners can respond to your individual wishes. Suitable connection accessories would be elastomer socket 110mm, elastomer end caps 110mm (if you do not need all inlets and outlets). As UV lamp we recommend our UVC 80W Amalgam.   Additional options - different filter panels (filter mesh) in stainless steel RVS available on order in 43µ or 60µ (please note that with finer meshes the flow rate is 30% to 50% lower depending on the µ-thickness) - our EPS drum filters can also be custom-built to different dimensions and pipe connections according to drawings - control cable, as well as connection cable for 220V (standard 2.5m) can be extended for an extra charge If you would like individual advice, please feel free to call us on 02945 / 96950 Functions of the control unit: - Plug location for circulation and rinsing pump - Plug and Play via sensor with measuring pins  - automatic cleaning - Switch for on/off incl. emergency switch - Button for manual flushing - Flushing is triggered by probes (level of probes adjustable) - Rotation time/ rinsing time adjustable - CE mark - Detailed instructions for use are included - Cleaning is adjustable ( time and duration ) - Dry-running protection for the pond pump - Dry-running protection for circulation and rinsing pump - Connections for sensor and safety switch Why EPS drum filters? after 30 years of experience and many purchased and self-tested filter systems from different suppliers, we decided to build our own drum filter series. There are stainless steel, PE and PP drum filters on the market. Some of the stainless steel filters were notable for their poor workmanship (cheap tank connectors that leaked, broke off or had rust defects). PE filters caused big problems when exposed to sunlight (bending and warping of the material) Many drum filters do not have a direct drive and are driven by pinions, V-belts or toothed belts. The use of salt also became problematic. In our view, these are all weak points that can lead to malfunctions. For these reasons, we decided to build PP filters that do not deform, are acid-resistant and are operated with a direct drive. After an intensive test period of approx. 6 years in our own KOI facility, which consists of approx. 60 tanks of various sizes, with full fish stocking and abundant feeding every day, we started series production. All the problems mentioned are now a thing of the past - We love clear water and healthy fish EPS drum filters reduce the need for cleaning and maintenance in fish farms and garden ponds to a minimum. The processing is carried out using the latest technology such as CNC machines, which guarantees quality and precision. The systems can be used in the koi and/or swimming pond sector as well as in fish farming, industry and public areas. The new control system is pre-set in the factory with a water-saving function, whereby the first contact at the probes causes the drum to rotate half a turn without rinsing. At the second contact on the probes, the drum is rotated a full revolution and cleaned completely. This reduces electricity and water consumption.Dispatch by Euro pallet 140x100x100 cm.You can convince yourself of the quality at any time in our showroom We are looking forward to your visit  

Function The function of the drum filter is to filter polluted water mechanically. Smallest particles are separated from the water by a stainless steel sieve RVS 316 of 75 micrometres and led to the outside via a dirt drain. This filtering process is automatically regulated by a control system and monitored by probes. In the event of a malfunction, the filter automatically switches off the circulation and backwash pump. The water level is constantly monitored by a level controller. The EPS PP-35 drum filter is made of very high quality PP plastic and is supplied including control unit, level controller, cover, channel flushing, direct drive and additional sockets for UVC and a second pump at an unprecedented price/performance ratio. The advantage of the EPS PP-35 is that by turning over a ball valve and pressing the test button "Flush", the gutter flushing is activated and thus cleaned of leaves, thread algae etc. The EPS PP-35 drum filter is available in both pump and gravity versions. If installation is desired, please contact us so that we or one of our partners can respond to your individual wishes. Suitable connection accessories would be elastomer socket 110mm, elastomer end caps 110mm (if you do not need all inlets and outlets). As UV lamp we recommend our UVC 80W Amalgam.   Additional options - different filter panels (filter mesh) in stainless steel RVS available on order in 43µ or 60µ (please note that with finer meshes the flow rate is 30% to 50% lower depending on the µ-thickness) - our EPS drum filters can also be custom-built to different dimensions and pipe connections according to drawings - control cable, as well as connection cable for 220V (standard 2.5m) can be extended for an extra charge If you would like individual advice, please feel free to call us on 02945 / 96950 Functions of the control unit: - Plug location for circulation and rinsing pump - Plug and Play via sensor with measuring pins  - automatic cleaning - Switch for on/off incl. emergency switch - Button for manual flushing - Flushing is triggered by probes (level of probes adjustable) - Rotation time/ rinsing time adjustable - CE mark - Detailed instructions for use are included - Cleaning is adjustable ( time and duration ) - Dry-running protection for the pond pump - Dry-running protection for circulation and flushing pump - Connections for sensor and safety switch Why EPS drum filters? after 30 years of experience and many purchased and self-tested filter systems from different suppliers, we decided to build our own drum filter series. There are stainless steel, PE and PP drum filters on the market. Some of the stainless steel filters were notable for their poor workmanship (cheap tank connectors that leaked, broke off or had rust defects). PE filters caused big problems when exposed to sunlight (bending and warping of the material) Many drum filters do not have a direct drive and are driven by pinions, V-belts or toothed belts. The use of salt also became problematic. In our view, these are all weak points that can lead to malfunctions. For these reasons, we decided to build PP filters that do not deform, are acid-resistant and are operated with a direct drive. After an intensive test period of approx. 6 years in our own KOI facility, which consists of approx. 60 tanks of various sizes, with full fish stocking and abundant feeding every day, we started series production. All the problems mentioned are now a thing of the past - We love clear water and healthy fish EPS drum filters reduce the need for cleaning and maintenance in fish farms and garden ponds to a minimum. The processing is carried out using the latest technology such as CNC machines, which guarantees quality and precision. The systems can be used in the koi and/or swimming pond sector as well as in fish farming, industry and public areas. The new control system is pre-set in the factory with a water-saving function, whereby the first contact at the probes causes the drum to rotate half a turn without rinsing. At the second contact at the probes, the drum is rotated a full revolution and cleaned completely. This reduces electricity and water consumption.Dispatch by Euro pallet 140x100x100 cm.You can convince yourself of the quality at any time in our showroom We are looking forward to your visit  

Function The function of the drum filter is to filter polluted water mechanically. Smallest particles are separated from the water by a stainless steel sieve RVS 316 of 75 micrometres and led to the outside via a dirt drain. This filtering process is automatically regulated by a control system and monitored by probes. In the event of a malfunction, the filter automatically switches off the circulation and backwash pump. The water level is constantly monitored by a level controller. The EPS PP-35 drum filter is made of very high quality PP plastic and is supplied including control unit, level controller, cover, channel flushing, direct drive and additional sockets for UVC and a second pump at an unprecedented price/performance ratio. The advantage of the EPS PP-35 is that by turning over a ball valve and pressing the test button "Flush", the gutter flushing is activated and thus cleaned of leaves, thread algae etc. The EPS PP-35 drum filter is available in both pump and gravity versions. If installation is desired, please contact us so that we or one of our partners can respond to your individual wishes. Suitable connection accessories would be elastomer socket 110mm, elastomer end caps 110mm (if you do not need all inlets and outlets). As UV lamp we recommend our UVC 80W Amalgam.   Additional options - different filter panels (filter mesh) in stainless steel RVS available on order in 43µ or 60µ (please note that with finer meshes the flow rate is 30% to 50% lower depending on the µ-thickness) - our EPS drum filters can also be custom-built to different dimensions and pipe connections according to drawings - control cable, as well as connection cable for 220V (standard 2.5m) can be extended for an extra charge If you would like individual advice, please feel free to call us on 02945 / 96950 Functions of the control unit: - Plug location for circulation and rinsing pump - Plug and Play via sensor with measuring pins  - automatic cleaning - Switch for on/off incl. emergency switch - Button for manual flushing - Flushing is triggered by probes (level of probes adjustable) - Rotation time/ rinsing time adjustable - CE mark - Detailed instructions for use are included - Cleaning is adjustable ( time and duration ) - Dry-running protection for the pond pump - Dry-running protection for circulation and flushing pump - Connections for sensor and safety switch Why EPS drum filters? after 30 years of experience and many purchased and self-tested filter systems from different suppliers, we decided to build our own drum filter series. There are stainless steel, PE and PP drum filters on the market. Some of the stainless steel filters were notable for their poor workmanship (cheap tank connectors that leaked, broke off or had rust defects). PE filters caused big problems when exposed to sunlight (bending and warping of the material) Many drum filters do not have a direct drive and are driven by pinions, V-belts or toothed belts. The use of salt also became problematic. In our view, these are all weak points that can lead to malfunctions. For these reasons, we decided to build PP filters that do not deform, are acid-resistant and are operated with a direct drive. After an intensive test period of approx. 6 years in our own KOI facility, which consists of approx. 60 tanks of various sizes, with full fish stocking and abundant feeding every day, we started series production. All the problems mentioned are now a thing of the past - We love clear water and healthy fish EPS drum filters reduce the need for cleaning and maintenance in fish farms and garden ponds to a minimum. The processing is carried out using the latest technology such as CNC machines, which guarantees quality and precision. The systems can be used in the koi and/or swimming pond sector as well as in fish farming, industry and public areas. The new control system is pre-set in the factory with a water-saving function, whereby the first contact at the probes causes the drum to rotate half a turn without rinsing. At the second contact at the probes, the drum is rotated a full revolution and cleaned completely. This reduces electricity and water consumption.Dispatch by Euro pallet 140x100x100 cm.You can convince yourself of the quality at any time in our showroom We are looking forward to your visit  

Function The function of the drum filter is to filter polluted water mechanically. Smallest particles are separated from the water by a stainless steel screen RVS 316 of 75 micrometres and led to the outside via a dirt drain. This filtering process is automatically regulated by a control system and monitored by probes. In the event of a malfunction, the filter automatically switches off the circulation and backwash pump. The water level is constantly monitored by a level controller. The EPS PP-65 drum filter is made of very high quality PP plastic and is supplied including control unit, level controller, cover, channel flushing, direct drive and additional sockets for UVC and a second pump in an unprecedented price/performance ratio. The advantage of the EPS PP-65 is that by turning a ball valve and pressing the test button "Flush", the gutter flushing is activated and thus cleaned of foliage, thread algae, etc. The EPS PP-65 can also be used to flush the gutter. The EPS PP-65 drum filter is available in both pump and gravity versions. If installation is desired, please contact us so that we or one of our partners can respond to your individual wishes. Suitable connection accessories would be elastomer socket 110mm, elastomer end caps 110mm (if you do not need all inlets and outlets). As UV lamp we recommend our UVC 80W Amalgam.   Additional options - different filter panels (filter mesh) in stainless steel RVS available on order in 43µ or 60µ (please note that with finer meshes the flow rate is 30% to 50% lower depending on the µ-thickness) - our EPS drum filters can also be custom-built to different dimensions and pipe connections according to drawings - control cable, as well as connection cable for 220V (standard 2.5m) can be extended for an extra charge If you would like individual advice, please feel free to call us on 02945 / 96950 Functions of the control unit: - Plug location for circulation and rinsing pump - Plug and Play via sensor with measuring pins  - automatic cleaning - Switch for on/off incl. emergency switch - Button for manual flushing - Flushing is triggered by probes (level of probes adjustable) - Rotation time/ rinsing time adjustable - CE mark - Detailed instructions for use are included - Cleaning is adjustable ( time and duration ) - Dry-running protection for the pond pump - Dry-running protection for circulation and flushing pump - Connections for sensor and safety switch Why EPS drum filters? after 30 years of experience and many purchased and self-tested filter systems from different suppliers, we decided to build our own drum filter series. There are stainless steel, PE and PP drum filters on the market. Some of the stainless steel filters were notable for their poor workmanship (cheap tank connectors that leaked, broke off or had rust defects). PE filters caused big problems when exposed to sunlight (bending and warping of the material) Many drum filters do not have a direct drive and are driven by pinions, V-belts or toothed belts. The use of salt also became problematic. In our view, these are all weak points that can lead to malfunctions. For these reasons, we decided to build PP filters that do not deform, are acid-resistant and are operated with a direct drive. After an intensive test period of approx. 6 years in our own KOI facility, which consists of approx. 60 tanks of various sizes, with full fish stocking and abundant feeding every day, we started series production. All the problems mentioned are now a thing of the past - We love clear water and healthy fish EPS drum filters reduce the need for cleaning and maintenance in fish farms and garden ponds to a minimum. The processing is carried out using the latest technology such as CNC machines, which guarantees quality and precision. The systems can be used in the koi and/or swimming pond sector as well as in fish farming, industry and public areas. The new control system is pre-set in the factory with a water-saving function, whereby the first contact at the probes causes the drum to rotate half a turn without rinsing. At the second contact at the probes, the drum is rotated a full revolution and cleaned completely. This reduces electricity and water consumption.Dispatch by Euro pallet 140x100x100 cm.You can convince yourself of the quality at any time in our showroom We are looking forward to your visit  

Function The function of the drum filter is to filter polluted water mechanically. Smallest particles are separated from the water by a stainless steel screen RVS 316 of 75 micrometres and led to the outside via a dirt drain. This filtering process is automatically regulated by a control system and monitored by probes. In the event of a malfunction, the filter automatically switches off the circulation and backwash pump. The water level is constantly monitored by a level controller. The EPS PP-65 drum filter is made of very high quality PP plastic and is supplied including control unit, level controller, cover, channel flushing, direct drive and additional sockets for UVC and a second pump in an unprecedented price/performance ratio. The advantage of the EPS PP-65 is that by turning a ball valve and pressing the test button "Flush", the gutter flushing is activated and thus cleaned of foliage, thread algae, etc. The EPS PP-65 can also be used to flush the gutter. The EPS PP-65 drum filter is available in both pump and gravity versions. If installation is desired, please contact us so that we or one of our partners can respond to your individual wishes. Suitable connection accessories would be elastomer socket 110mm, elastomer end caps 110mm (if you do not need all inlets and outlets). As UV lamp we recommend our UVC 80W Amalgam.   Additional options - different filter panels (filter mesh) in stainless steel RVS available on order in 43µ or 60µ (please note that with finer meshes the flow rate is 30% to 50% lower depending on the µ-thickness) - our EPS drum filters can also be custom-built to different dimensions and pipe connections according to drawings - control cable, as well as connection cable for 220V (standard 2.5m) can be extended for an extra charge If you would like individual advice, please feel free to call us on 02945 / 96950 Functions of the control unit: - Plug location for circulation and rinsing pump - Plug and Play via sensor with measuring pins  - automatic cleaning - Switch for on/off incl. emergency switch - Button for manual flushing - Flushing is triggered by probes (level of probes adjustable) - Rotation time/ rinsing time adjustable - CE mark - Detailed instructions for use are included - Cleaning is adjustable ( time and duration ) - Dry-running protection for the pond pump - Dry-running protection for circulation and flushing pump - Connections for sensor and safety switch Why EPS drum filters? after 30 years of experience and many purchased and self-tested filter systems from different suppliers, we decided to build our own drum filter series. There are stainless steel, PE and PP drum filters on the market. Some of the stainless steel filters were notable for their poor workmanship (cheap tank connectors that leaked, broke off or had rust defects). PE filters caused big problems when exposed to sunlight (bending and warping of the material) Many drum filters do not have a direct drive and are driven by pinions, V-belts or toothed belts. The use of salt also became problematic. In our view, these are all weak points that can lead to malfunctions. For these reasons, we decided to build PP filters that do not deform, are acid-resistant and are operated with a direct drive. After an intensive test period of approx. 6 years in our own KOI facility, which consists of approx. 60 tanks of various sizes, with full fish stocking and abundant feeding every day, we started series production. All the problems mentioned are now a thing of the past - We love clear water and healthy fish EPS drum filters reduce the need for cleaning and maintenance in fish farms and garden ponds to a minimum. The processing is carried out using the latest technology such as CNC machines, which guarantees quality and precision. The systems can be used in the koi and/or swimming pond sector as well as in fish farming, industry and public areas. The new control system is pre-set in the factory with a water-saving function, whereby the first contact at the probes causes the drum to rotate half a turn without rinsing. At the second contact at the probes, the drum is rotated a full revolution and cleaned completely. This reduces electricity and water consumption.Dispatch by Euro pallet 140x100x100 cm.You can convince yourself of the quality at any time in our showroom We are looking forward to your visit  

Funktion Trommelfilter / Drum Filter Die Funktion des Trommelfilters ist es, belastetes Wasser mechanisch zu filtern. Wir sind nicht nur Hersteller, sondern auch Praktiker. Bei uns werden alle Filter die von uns neu entwickelt werden vorab 3-6 Monate in unserer Fischzucht Anlage getestet und gehen erst nach erfolgreicher Testphase in den Verkauf. Durch ein Edelstahlsieb RVS 316 von 100 Mikrometer werden Kleinstpartikel vom Wasser getrennt und über einen Schmutzablauf nach Außen geführt. Die Trommelfilter von EPS bieten Möglichkeiten für mehrere Anwendungsbereiche. Ob Koi-, Schwimmteich oder industrielle technische Anlagen, wir bieten Ihnen immer das passende System an. Der Filterprozess wird über eine Steuerung automatisch geregelt und von Sonden überwacht. Bei einer Fehlfunktion schaltet der Filter automatisch Umwälz- und Rückspülpumpe ab. Der Wasserstand wird ständig von Sonden überwacht. Der EPS Trommelfilter PP150 ist sehr hochwertig aus PP Kunststoff verarbeitet und wird inklusive Steuerung, Notausdeckelschalter, manueller Rinnenspülung, Niveauregler, Deckel in einem noch nie dagewesenen Preis/Leistungsverhältnis geliefert. All inclusive. Das heißt, bei uns leidet nicht die Qualität unter dem Preis. Alle Trommelfilter von EPS haben eine Verstärkung mit einem 50/50 U- Profil sowie einem Innenkern aus 40/40 4 Kant Stahlrohr. Durch den Direktantrieb vom Motor zur Trommel fallen Verschleißteile wie bei herkömmlichen Trommelfiltern (Keilriemen, Zahnriemen oder Kunststoffzahnräder) weg. Falls die Schmutzwasserrinne durch starkes Fadenalgenvorkommen oder Blätter einmal verstopfen sollte, ist es kein Problem diese einfach zu demontieren und zu reinigen ohne die Filtertrommel auszubauen oder das Gewebe zu entfernen. Hierzu haben wir auch zusätzlich eine manuelle Rinnenspülung installiert. Der PP150 Trommelfilter ist sowohl als Pump- sowie als Schwerkraftversion lieferbar. Auch wenn Sie eine Schwerkraftversion besitzen, ist es mit wenigen Handgriffen möglich, diese auf Pumpversion umzubauen (wenn Sie hierzu Hilfe benötigen, stehen wir Ihnen gerne zur Verfügung). Durch die Sicherungsfunktion bzw. den Notausdeckelschalter werden die Tauch UVCs direkt abgeschaltet, wenn der Deckel geöffnet wird. Die Funktion ist nur gewährleistet, wenn diese über die mitgelieferte Steuerung angeschlossen werden. Es ist empfehlenswert den elektrischen Anschluss der Steuerung mit einem FI- Schutzschalter abzusichern. Die Steuerung sollte nicht direkter Feuchtigkeit ausgesetzt werden (Regen). Passendes Anschlusszubehör wären Elastomer-Muffe 110 mm, Elastomer-Endkappe 110 mm (falls Sie nicht alle Ein- und Ausläufe benötigen). Als UV-Lampe empfehlen wir unsere Tauch UVC 40 W Amalgam oder Tauch UVC 80 W Amalgam.   Zusätzliche Optionen: • unterschiedliche Filter-Paneele (Filtergewebe) in Edelstahl RVS auf Bestellung möglich (bitte beachten Sie, dass bei feineren Geweben die Durchflussrate um 30% bis 50% je nach µ-Stärke geringer ist) • unsere EPS-Trommelfilter können auf Wunsch individuell nach Zeichnung gegen Aufpreis gebaut werden • individuelle Biokammern (rund oder eckig) sowie Rieselfilter können auf Wunsch in allen Größen nach Zeichnung gebaut werden • falls Sie eine individuelle Beratung wünschen, können Sie uns gerne anrufen ☎️02945 / 96950   Funktionen der Steuerung: • Steckerplatz für Umwälz- und Spülpumpe • Plug and Play über einen Sensor (Messsonden) • automatische Reinigung • Schalter für Ein-/Aus inkl. Notschalter • Taste für manuelles Spülen • Die Spülungen werden durch Sonden ausgelöst (Niveau der Sonden verstellbar) • Drehzeit / Spülzeit einstellbar • CE Konformitätserklärung wird mitgeliefert • ausführlich Gebrauchs- / Bedienungsanleitung wird mitgeliefert (deutsch oder englisch) • Aufstell- / Einbauanleitung wird mitgeliefert (deutsch oder englisch) • Reinigung ist einstellbar (Zeit und Dauer) • Trockenlaufschutz für die Teichpumpe • Trockenlaufschutz für Umwälz- und Spülpumpe • Anschlüsse für Fühler und Sicherheitsschalter • alle Steckdosen sind einzeln abgesichert (5/10 A mit außenliegenden Sicherungen)   Warum EPS- Trommelfilter? Aus 30-jähriger Erfahrung und vielen gekauften und selbst getesteten Filtersystemen von unterschiedlichen Anbietern haben wir uns entschlossen eine eigene Trommelfilterserie zu bauen. Es gibt auf dem Markt Trommelfilter aus Edelstahl, Polyethylen (PE) sowie Polypropylen (PP). Die Edelstahlfilter sind teilweise durch schlechte Verarbeitung (billige Tank Connectoren, die undicht waren, abbrachen oder Rostmängel aufwiesen) aufgefallen. PE Filter verursachten große Probleme bei Sonneneinstrahlung (Verbiegen und Verziehen des Materials). Viele Trommelfilter haben keinen Direktantrieb und werden über Ritzel, Keil- oder Zahnriemen angetrieben. Dies alles sind aus unsere Sicht Schwachpunkte, die zu Störungen führen können. Aus diesen Gründen haben wir uns entschlossen PP- Filter zu bauen die sich nicht verformen, säurefest sind und mit einem Direktantrieb betrieben werden (Industrie-Motor). Nach einer intensiven Testzeit von ca. 6 Jahren in unserer eigenen KOI- Anlage, die aus ca. 60 Becken unterschiedlichster Größe besteht, sowie bei vollem Fischbesatz und üppiger Fütterung täglich, haben wir die Serienproduktion aufgenommen. Alle genannten Probleme gehören nun der Vergangenheit an - Wir lieben klares Wasser und gesunde Fische - EPS Trommelfilter reduzieren den Reinigungs- und Wartungseinsatz bei Fischzuchten und Gartenteichen auf ein Minimum. Die Verarbeitung erfolgt über modernste Technologie wie CNC- Maschinen, wodurch Qualität und Präzision gewährleistet sind. Die Anlagen können im Koi- und/oder Schwimmteichbereich sowie bei der Fischzucht, in der Industrie und öffentlichen Bereichen eingesetzt werden. Auch bei Problemen stehen wir jederzeit mit Wort und Tat zur Verfügung. Bitte bedenken Sie, dass ein Trommelfilter aus mehreren technischen Komponenten gefertigt wird.   🚚 Versand per Einwegpalette   Sie können sich jederzeit von der Qualität in unsere Ausstellung überzeugen. Wir freuen uns auf Ihren Besuch 😊

Funktion Trommelfilter / Drum Filter Die Funktion des Trommelfilters ist es, belastetes Wasser mechanisch zu filtern. Wir sind nicht nur Hersteller, sondern auch Praktiker. Bei uns werden alle Filter die von uns neu entwickelt werden vorab 3-6 Monate in unserer Fischzucht Anlage getestet und gehen erst nach erfolgreicher Testphase in den Verkauf. Durch ein Edelstahlsieb RVS 316 von 100 Mikrometer werden Kleinstpartikel vom Wasser getrennt und über einen Schmutzablauf nach Außen geführt. Die Trommelfilter von EPS bieten Möglichkeiten für mehrere Anwendungsbereiche. Ob Koi-, Schwimmteich oder industrielle technische Anlagen, wir bieten Ihnen immer das passende System an. Der Filterprozess wird über eine Steuerung automatisch geregelt und von Sonden überwacht. Bei einer Fehlfunktion schaltet der Filter automatisch Umwälz- und Rückspülpumpe ab. Der Wasserstand wird ständig von Sonden überwacht. Der EPS Trommelfilter PP150 ist sehr hochwertig aus PP Kunststoff verarbeitet und wird inklusive Steuerung, Notausdeckelschalter, manueller Rinnenspülung, Niveauregler, Deckel in einem noch nie dagewesenen Preis/Leistungsverhältnis geliefert. All inclusive. Das heißt, bei uns leidet nicht die Qualität unter dem Preis. Alle Trommelfilter von EPS haben eine Verstärkung mit einem 50/50 U- Profil sowie einem Innenkern aus 40/40 4 Kant Stahlrohr. Durch den Direktantrieb vom Motor zur Trommel fallen Verschleißteile wie bei herkömmlichen Trommelfiltern (Keilriemen, Zahnriemen oder Kunststoffzahnräder) weg. Falls die Schmutzwasserrinne durch starkes Fadenalgenvorkommen oder Blätter einmal verstopfen sollte, ist es kein Problem diese einfach zu demontieren und zu reinigen ohne die Filtertrommel auszubauen oder das Gewebe zu entfernen. Hierzu haben wir auch zusätzlich eine manuelle Rinnenspülung installiert. Der PP150 Trommelfilter ist sowohl als Pump- sowie als Schwerkraftversion lieferbar. Auch wenn Sie eine Schwerkraftversion besitzen, ist es mit wenigen Handgriffen möglich, diese auf Pumpversion umzubauen (wenn Sie hierzu Hilfe benötigen, stehen wir Ihnen gerne zur Verfügung). Durch die Sicherungsfunktion bzw. den Notausdeckelschalter werden die Tauch UVCs direkt abgeschaltet, wenn der Deckel geöffnet wird. Die Funktion ist nur gewährleistet, wenn diese über die mitgelieferte Steuerung angeschlossen werden. Es ist empfehlenswert den elektrischen Anschluss der Steuerung mit einem FI- Schutzschalter abzusichern. Die Steuerung sollte nicht direkter Feuchtigkeit ausgesetzt werden (Regen). Passendes Anschlusszubehör wären Elastomer-Muffe 110 mm, Elastomer-Endkappe 110 mm (falls Sie nicht alle Ein- und Ausläufe benötigen). Als UV-Lampe empfehlen wir unsere Tauch UVC 40 W Amalgam oder Tauch UVC 80 W Amalgam.   Zusätzliche Optionen: • unterschiedliche Filter-Paneele (Filtergewebe) in Edelstahl RVS auf Bestellung möglich (bitte beachten Sie, dass bei feineren Geweben die Durchflussrate um 30% bis 50% je nach µ-Stärke geringer ist) • unsere EPS-Trommelfilter können auf Wunsch individuell nach Zeichnung gegen Aufpreis gebaut werden • individuelle Biokammern (rund oder eckig) sowie Rieselfilter können auf Wunsch in allen Größen nach Zeichnung gebaut werden • falls Sie eine individuelle Beratung wünschen, können Sie uns gerne anrufen ☎️02945 / 96950   Funktionen der Steuerung: • Steckerplatz für Umwälz- und Spülpumpe • Plug and Play über einen Sensor (Messsonden) • automatische Reinigung • Schalter für Ein-/Aus inkl. Notschalter • Taste für manuelles Spülen • Die Spülungen werden durch Sonden ausgelöst (Niveau der Sonden verstellbar) • Drehzeit / Spülzeit einstellbar • CE Konformitätserklärung wird mitgeliefert • ausführlich Gebrauchs- / Bedienungsanleitung wird mitgeliefert (deutsch oder englisch) • Aufstell- / Einbauanleitung wird mitgeliefert (deutsch oder englisch) • Reinigung ist einstellbar (Zeit und Dauer) • Trockenlaufschutz für die Teichpumpe • Trockenlaufschutz für Umwälz- und Spülpumpe • Anschlüsse für Fühler und Sicherheitsschalter • alle Steckdosen sind einzeln abgesichert (5/10 A mit außenliegenden Sicherungen)   Warum EPS- Trommelfilter? Aus 30-jähriger Erfahrung und vielen gekauften und selbst getesteten Filtersystemen von unterschiedlichen Anbietern haben wir uns entschlossen eine eigene Trommelfilterserie zu bauen. Es gibt auf dem Markt Trommelfilter aus Edelstahl, Polyethylen (PE) sowie Polypropylen (PP). Die Edelstahlfilter sind teilweise durch schlechte Verarbeitung (billige Tank Connectoren, die undicht waren, abbrachen oder Rostmängel aufwiesen) aufgefallen. PE Filter verursachten große Probleme bei Sonneneinstrahlung (Verbiegen und Verziehen des Materials). Viele Trommelfilter haben keinen Direktantrieb und werden über Ritzel, Keil- oder Zahnriemen angetrieben. Dies alles sind aus unsere Sicht Schwachpunkte, die zu Störungen führen können. Aus diesen Gründen haben wir uns entschlossen PP- Filter zu bauen die sich nicht verformen, säurefest sind und mit einem Direktantrieb betrieben werden (Industrie-Motor). Nach einer intensiven Testzeit von ca. 6 Jahren in unserer eigenen KOI- Anlage, die aus ca. 60 Becken unterschiedlichster Größe besteht, sowie bei vollem Fischbesatz und üppiger Fütterung täglich, haben wir die Serienproduktion aufgenommen. Alle genannten Probleme gehören nun der Vergangenheit an - Wir lieben klares Wasser und gesunde Fische - EPS Trommelfilter reduzieren den Reinigungs- und Wartungseinsatz bei Fischzuchten und Gartenteichen auf ein Minimum. Die Verarbeitung erfolgt über modernste Technologie wie CNC- Maschinen, wodurch Qualität und Präzision gewährleistet sind. Die Anlagen können im Koi- und/oder Schwimmteichbereich sowie bei der Fischzucht, in der Industrie und öffentlichen Bereichen eingesetzt werden. Auch bei Problemen stehen wir jederzeit mit Wort und Tat zur Verfügung. Bitte bedenken Sie, dass ein Trommelfilter aus mehreren technischen Komponenten gefertigt wird.   🚚 Versand per Einwegpalette   Sie können sich jederzeit von der Qualität in unsere Ausstellung überzeugen. Wir freuen uns auf Ihren Besuch 😊