Immersion UVC 75W T5 - Kit - without plug
UV-C immersion lamps have a great advantage over conventional UV-C units: there is no pressure loss.
- These lamps can be inserted into filter tanks so that the water can flow through without resistance / pressure loss.
- The plastic end of the lamp has a diameter of 32mm, so you can use 32mm pipe clamps (104045) to mount the lamp in a tank.
- A special tank grommet is also available to install the lamp directly in the filter, for example (see illustration / 601236)
Technical data:
- Power consumption: 75 W
- Max. burning time: 9,000 hours
- Length: ~ 80 cm
- for ponds without fish: up to 100 m³
- for ponds with fish: up to 60 m³
Attention! Observe safety instructions!
- This product is only suitable for professional use.
- This is only a spare parts set.
The scope of delivery includes:
UV lamp, quartz glass, ballast unit
The unit is supplied WITHOUT plug.
Attention!
Important safety instructions!
These UV-C - XClear UVC - AquaForte - Submersible UVC lamps do NOT comply with the applicable DIN standards! Therefore the kit is delivered without plug. It must be installed by an experienced and recognised specialist company in accordance with DIN EN60335.
Standard protective accessories (safety goggles, gloves, etc.) must be worn during installation, assembly and commissioning. These accessories are NOT included in the kit. Always have the installation carried out by a certified specialist company.
UV-C radiation is dangerous for humans and animals and can damage the skin and/or eyes!
Switch off the unit before approaching it!
Submersible UV-C lamps must always be completely submerged in water!
The seller is not fully liable for any damage caused by improper assembly, improper commissioning or improper operation, but the customer or the installer.
Installation or operating instructions are NOT enclosed with the delivery!
Related products
