Bead filter
Bead filters are space-saving and very efficient filter systems, which are particularly impressive because they are easy to clean. Please note that the bead filters can only be operated with suitable pre-filtering, which prevents larger dirt particles from entering the bead filter. The front piping of the filters allows high flow rates with low pressure resistance. The bead filter can beset upcompletely independently of the water level on any substrate. The shorter the piping with the lowest resistance in the lines, the higher the pump performance. A space of one square metre is sufficient to set up the system. For easy connection of the filter, a complete connection kit is supplied as standard (6-way valve, compressor, non-return valve).
SuperBead filter The SuperBead combines fine mechanical and biological filtration. It is used for (koi/swimming) ponds and swimming pools. The filter differs from ordinary bead filter systems and sand filters by its rinsing process. Some advantages of the SuperBead:- Suitable for energy-saving pumps - User-friendly - No additional air pumps (wear, Maintenance and sensitive to moisture/water) - Excellent biological filtration - Lower energy consumption - Easy automation Short description of how it works - The coarsely pre-filtered water is pumped into the filter - The beads float on top and lie still - The beads trap fine dirt up to 20 microns - Biological filtration takes place on the surface of the beads - The trapped dirt is regularly removed by flushing the filter - Easy automation of flushing is optional The hourglass shape of the SuperBead ensures: - Quiet water flow through the filter - Good distribution of water through the filter bed - The flushing process - Avoidance of dead dirt corners Rinsing process Bead filter: Every bead filter is characterised by a rinsing process. The captured dirt particles have to be flushed out of the filter again. In contrast to modified sand filters, the SuperBead was developed specifically for this rinsing process. Modified sand filters: - Require stronger water pumps (=more energy) for normal operation - Their resistance is greater, so larger - more expensive - pumps are required - Use a 6-way flush valve: complicated operation - Use an external air blower for flushing: cannot be set up outdoors - vulnerable - Recovery risk of flushing too thoroughly - damage to biology - Use a lot of water per flush - Have small connections of 50/63 mm (=stronger pump=higher energy costs) The SuperBead: - Works with energy-saving low-pressure pumps - Does not damage biology during flushing - Uses little flushing water (Small +/- 150 litres - Large +/- 400 litres) - High flows at low pressure (Small max. 14 m3/hour - Large max. 25 m3/hour) - High biological output (Small 400 grams/day - Large 1 kg/day) - Has large connections of 75 (Small) - 90 mm (Large) - Is easy to flush (switch off pump and empty) - Is easy to automate Pumping and energy savingOne of the biggest advantages of the SuperBead compared to other sand/bead filters is the pump pressure required. Very energy-efficient low-pressure pumps can easily be used with the SuperBead. Modified sand filters often require two to four times the pump power to pump the same net amount of water through the filter. Practice:A SuperBead requires a pre-filter system such as the SuperSieve (except indoors). The SuperBead can be easily installed anywhere, both below and above water level. It can also be placed further away from the pool if the pipe diameters are taken into account. As it is a closed filter, indoor installation does not cause any problems in terms of moisture, odour or insect nuisance. The SuperBead has no electrical components such as a fan and can therefore be installed outdoors without hesitation. If the sewage system is too far away to discharge the wastewater, the pump can also be connected so that the wastewater is pumped directly to the sewage system. An additional set intended for this purpose is included in the scope of delivery.
SuperBead filter The SuperBead combines fine mechanical and biological filtration. It is used for (koi/swimming) ponds and swimming pools. The filter differs from ordinary bead filter systems and sand filters by its rinsing process. Some advantages of the SuperBead:- Suitable for energy-saving pumps - User-friendly - No additional air pumps (wear, maintenance and sensitive to moisture/water) - Excellent biological filtration - Lower energy consumption - Easy automation Brief description of how it works - The coarsely pre-filtered water is pumped into the filter - The beads float on top and lie still - The beads trap fine dirt up to 20 microns - Biological filtration takes place on the surface of the beads - The trapped dirt is regularly removed by rinsing the filter - Optional simple automation of rinsing is possible The hourglass shape of the SuperBead ensures: - Smooth water flow through the filter - Good distribution of water through the filter bed - The rinsing process - Avoidance of dead dirt corners Rinsing process Bead filter: Every bead filter is characterised by a rinsing process. The captured dirt particles have to be flushed out of the filter again. In contrast to modified sand filters, the SuperBead was developed specifically for this rinsing process. Modified sand filters: - Require stronger water pumps (=more energy) for normal operation - Their resistance is greater, which is why larger - more expensive - pumps are required - Use a 6-way flush valve: complicated operation - Use an external air blower for flushing: cannot be set up outdoors - Vulnerable - Recovery risk of flushing too thoroughly - Damage to biology - Use a lot of water per flush - Have small connections of 50/63 mm (=more powerful pump=higher energy costs) The SuperBead: - Works with energy-saving low-pressure pumps - Does not damage the biology during flushing - Uses little flushing water (Small +/- 150 litres - Large +/- 400 litres) - High flows at low pressure (Small max. 14 m3/hour - Large max. 25 m3/hour) - High biological output (Small 400 grams/day - Large 1 kg/day) - Has large ports of 75 (Small) - 90 mm (Large) - Is easy to flush (switch off pump and empty) - Is easy to automate Pumping and energy savingOne of the biggest advantages of the SuperBead compared to other sand/bead filters is the pump pressure required. Very energy-efficient low-pressure pumps can easily be used with the SuperBead. Modified sand filters often require two to four times the pump power to pump the same net amount of water through the filter. Practice:A SuperBead requires a pre-filter system such as the SuperSieve (except indoors). The SuperBead can be easily installed anywhere, both below and above water level. It can also be placed further away from the pool if the pipe diameters are taken into account. As it is a closed filter, indoor installation does not cause any problems in terms of moisture, odours or insects. The SuperBead has no electrical components such as a fan and can therefore be installed outdoors without hesitation. If the sewage system is too far away to discharge the wastewater, the pump can also be connected so that the wastewater is pumped directly to the sewage system. An additional set intended for this purpose is included in the scope of delivery.
This enables the use of energy-saving pumps. Thanks to the very compact bypass system, the 6-way valve is bypassed during filtration so that the water runs directly into and out of the filter in a straight line. This ensures a minimum of 30% less pressure loss (depending on the pump type). The bypass system is very easy to install thanks to its threaded couplings. Suitable for EconoBeads with 63 connections.
This enables the use of energy-saving pumps. Thanks to the very compact bypass system, the 6-way valve is bypassed during filtration so that the water runs directly into and out of the filter in a straight line. This ensures a minimum of 30% less pressure loss (depending on the pump type). The bypass system is very easy to install thanks to its threaded couplings. Suitable for EconoBeads with 50 mm connections.
The economical answer to replicas from the bead filter experts. The EconoBead bead filters have a very strong polypropylene housing and are equipped as standard with: - Bottom drain to remove debris from the bottom- 6-way flap- Transparent lid
The economical answer to replicas from the bead filter experts. The EconoBead bead filters have a very strong polypropylene housing and are equipped as standard with: - Bottom drain to remove debris from the bottom- 6-way flap- Transparent lid
The economical answer to replicas from the bead filter experts. The EconoBead bead filters have a very strong polypropylene housing and are equipped as standard with: - Bottom drain to remove debris from the bottom- 6-way flap- Transparent lid
The economical answer to replicas from the bead filter experts. The EconoBead bead filters have a very strong polypropylene housing and are equipped as standard with: - Bottom drain to remove debris from the bottom- 6-way flap- Transparent lid
The economical answer to replicas from the bead filter experts. The EconoBead bead filters have a very strong polypropylene housing and are equipped as standard with: - Bottom drain to remove debris from the bottom- 6-way flap- Transparent lid
The economical answer to replicas from the bead filter experts. The EconoBead bead filters have a very strong polypropylene housing and are equipped as standard with: - Bottom drain to remove debris from the bottom- 6-way flap- Transparent lid
This high-performance aerator comes from the industry and has been designed for short-term aeration . Its enormous performance 2100 Ltr/min and a max. counterpressure of 2.5 bar are ideal prerequisites for aeration or moving the filter beads, even if they should be clumped or stuck together by the biofilm. Flow rate in L/min: 2,100 litres 900 watts