Trickle filter RF60 - 3pcs. with 2 x 110 mm outlet

€599.00*

Prices incl. VAT plus shipping costs

Available, delivery time: 5 - 7 Tage (10 - 12 Tage bei Versand ins Ausland)

Variant

mit 2 x 110 mm Auslauf

mit Wasserfall-Auslauf

RF60 Middle body

Product number: 406220

Shipping per Euro pallet 120x80x100

Technical data:

- Dimensions 85 x 71/80 x 47/54 cm (H x W x D)
- 50 mm inlet incl. sprinkling (spray bar)
- flow rate up to 30m³ / hr.
- Consists of 3 elements
- outlet flat as waterfall
- filter media as desired (not included/accessories)
- incl. media carrier

Function of the trickle filter

The trickle filter is an innovative filter system that is installed above the pool or pond level.
The water is pumped up into the trickle filter by a pump and then trickles back into the basin or pond via the filter medium.

We offer the trickle filter in two different versions

Dimensions

Width approx. 100 cm / inlet approx. 63 mm
Width including inlet approx. 112 cm
Depth approx. 46.5 cm
Depth including inlet approx. 50 cm

The advantages of a

trickle filter

✅ Filter media are never completely covered by the water

✅ Settlement of aerobic (oxygen-rich) bacteria

✅ This supports the breakdown of ammonium or nitrite

✅ Space-saving upright installation

✅ Various filter media can be used.

✅ Complement for an existing garden pond / filter system.

Passendes Zubehör

Elastomer reducing sleeve 110x75mm

Size x size: 110 x 75 mm

Flexible fittings offer numerous advantages for connections between PVC pipelines and especially for connecting PVC pipelines with materials that cannot be bonded or bond poorly, such as stainless steel, PP, PE, concrete and polyester. In addition, flexible couplings are very well suited for transitions from metric to English/American pipe dimensions. The couplings are very flexible and therefore can also be used well when lines are not exactly matched. Flexible couplings can also be installed or removed very quickly for system changes, test set-ups or temporary installations without the very labour-intensive and unhealthy gluing of connections. Flexible couplings can be used to connect lines even at temperatures below freezing, where gluing is not possible. Even in the case of broken pipes (e.g. due to frost), it is possible in many cases to carry out an (emergency) repair quickly with flexible couplings. In addition to the simple assembly of pipelines, the flexibility of the plastic parts offers the additional advantage that vibrations (e.g. from pumps) are damped. As a result, they also make a major contribution to preventing stress fractures in PVC pipelines.Advantages:- quick connection without gluing- eliminate stresses in pipelines- easy connection of PVC with PE, PP, stainless steel, cast iron, concrete etc.-easy transition from metric to inch- dampens vibrations in pipelines- no harmful adhesive/solvent vapours- Can be installed in frosty conditions- easy to dismantle and reuse- simple emergency repair of pipelines- for connecting elements that are not exactly matched to each other

Variants from €5.60*

€10.95*

Elastomer reducing sleeve 110x90mm

Size x size: 110 x 90 mm

Elastomer reducing sleeve

Variants from €5.60*

€10.95*

Elastomer reducing sleeve 110x50mm

Size x size: 110 x 50 mm

Elastomer reducing sleeve

Variants from €5.60*

€10.95*

HXF 17 KLL - black - 595 m² surface - Ø:17mm - 100 litres

Filter media: 100 litres

A circumferential spiral, with blades pointing inwards, characterises the sensible design. It reduces flow shadows, increases effectiveness and increases the proportion of protected surface area for suspended bodies with low flow resistance. Large openings in this filter material allow high flow rates and provide maximum surface area for the formation of biology. These properties make this filter material interesting for all koi pond filters.

Content: 100 liter (€0.90* / 1 liter)

€89.90*