Pond pump AF DM-5000 LV 12 V
DM pumps are usually installed "dry" (but below the water level), for example downstream of a sieve filter (Sieve).
Technical specifications:
- Watt: 40
- max. litres/hour: 5000
- max. delivery head in metres: 3.5
- inlet: 1 1/4"
- Output: 1 1/4"
Advantages:
- economical energy consumption
- low noise
- synchronous motor
- suitable for fresh and salt water
- switches off automatically when there is no water in the rotor
- Suitable for wet and dry installation
- can pump dirt particles up to 6mm
The new series of low voltage pumps is based on the popular DM series. Ideal for swimming ponds or other installations where a low voltage pump is required. Extremely energy-efficient pump with innovative electronics! Low noise operation. Equipped with a synchronous motor. No individual copper parts. Equipped with a wear-resistant ceramic shaft. Pump switches off automatically if there is not enough water in the rotor. If the impeller is blocked, the pump goes into the "lock" state where no power is consumed until the blockage is removed. This prevents the motor from burning out. Interestingly priced dirty water pump for streams, waterfalls, fountains or filters, etc.
Also suitable for dry installation if the inlet is positioned below the water level. Can pump dirt particles up to 6mm.