MV 30 Middle vortex incl. piping and filling package
Shipping per Euro pallet 120x80x120
Technical data:
- dimensions (LxWxH) in cm : 110 x 110 x 74
- dimensions per filter chamber in cm : 45 x 45 x 51
- max. pond size in litres : 25,000
- max. koi pond size in litres : 15,000
- max. pump capacity in litres per hour : 8,000
- vortex diameter in cm : 50
- connection inlet in mm: 110
- connection outlet in mm : 110
- drain pipework in mm: 50
Compact, stable 5-chamber filter made of GRP
- incl. piping and filling package (see description)
- with upflow system
- higher flow rate
- filter chambers firmly laminated
- strong walls
- smooth outside
- can be used as a gravity filter or operated with a pump
- optionally without filling package
- without GRP cover - see accessories (right)
- without prefilter partone - see accessories (right)
The GRP medium vortex is a compact filter series from EPS. The strong walls of this filter series are smooth on the outside. The firmly laminated filter chambers allow a high flow rate. We have equipped the Mittelvortex 80 and 100 with a second additional inlet. Both 110mm inlets are firmly laminated and directly connected to the middle vortex.
This means that the bottom outlet and skimmer can also be connected separately to the filters in this filter series, which has increased the performance enormously. This filter series can be operated both as a gravity filter and in pump mode. The central vortex is also equipped with a central overflow pipe.
These filters have 5 dirt outlets, so each chamber can be emptied individually. We offer this filter series incl. piping and filling package.
The filling package includes:
Brushes, Japan mat, Helix and clay granulate.
The lid or pre-filter cartridge must be ordered separately. The piping is centrally located on the front side of the filter. We only use high quality pull valves. Each filter is tested for leaks before shipping.
| Article type: | Mid-vortex |
|---|
Related products
