Flushing pump for drum filter TIP GP3000 dry

The TIP GP3000 is ideally suited as a flushing pump in drum filters and is equipped with high-quality stainless steel pump housing. It is a self-priming pump with jet hydraulic system and on/off switch. It is equipped with a maintenance-free condenser motor with thermal overload protection.

Flexible locations

The TIP GP3000 IS suitable for both mobile use and fixed installation.

Wide range of applications 

The TIP GP3000 is not only used in the drum filter sector, but is also suitable, for example, for watering or sprinkling gardens, filling and emptying basins or storage tanks, cleaning terraces and pavements.

Delivery rate and delivery head

40 m - 150 l/h
30 m - 600 l/h
20 m - 1,200 l/h
10 m - 2,400 l/h

The flow rate of a pump depends mainly on the delivery head. The term 'head' refers to the difference in height between the water surface and the water intake. The table above shows the performance of the TIP GP3000 at different heads. For example, at a head of 10 metres, this pump can be expected to deliver 2,400 litres per hour.

Maximum number of sprinklers

Garden pumps are very suitable for operating irrigation systems - such as sprinklers. This model is suitable for connecting a maximum of 1 sprinkler. This specification is based on the following standard values: Water flow at sprinkler: approx. 600 l/h. Water pressure at sprinkler: approx. 2 bar. Suction height: max. 5 m. The term 'suction height' refers to the difference in height between the water surface and the pump.