BaoBio+ 0,5 kg

Abbildung ähnlich

22,50 EUR*

Sadržaj: 0.5 kg (45,00 EUR* / 1 kg)

U cijenu je uračunat PDV plus troškovi slanja

Dostupno, vrijeme dostave 2-3 Tage

Quantity/Weight

0,5 kg

1 Kg

2,5 Kg

Broj proizvoda: 714325

BaoBio+ is a highly concentrated bacterial preparation with a bacterial count of over 100 million per gram.

BaoBio+ bacterial strains biologically reduce harmful Pseudomonas and Aeromonas strains by up to 99.9% within 4 weeks. BaoBio+ also contains a bacterial strain that breaks down sludge and dirt, improving water quality.

BaoBio+ contains no antibiotics or aggressive chemicals - the ecosystem of the pond or the biology of the filter is not attacked by its use.

Dosage:
Weekly 2.5 g per 1,000 litres. Preferably dissolve in advance and dose into the filter.

Areas of application:
BaoBio+ was developed on the basis of scientific research into the development of bacterial infections in ornamental fish. These infections cause, among other things, the so-called hole disease. BaoBio+ also reduces organic waste in koi ponds, such as ammonia, nitrite, nitrate and phosphate. This creates an improved balance while inhibiting algae growth

Special instructions:

- store in a cool and dry place

- Dispose of completely empty packaging with household waste

- keep out of the reach of children

Quantity/Weight:	0,5 kg, 1 Kg , 2,5 Kg

Related products

Water test set for PH / NH3 / No2 / for 3 x 100 tests

Instruction: Acidity (pH) Take a water sample of 5 ml.Add 5 droplets of pH test liquid and shake the test tube.Determine the pH value using the colour chart. Instructions: Ammonia water (NH3 & NH4) Take a water sample of 10 ml.Add 5 droplets of NH3-1 test liquid and shake the test tube.Add 5 droplets of NH3-2 test liquid and shake the test tube.Add 5 droplets of NH3-3 test liquid and shake the test tube. Wait 15 minutes and then determine the NH3 value of the water using the colour chart. Instructions: Nitrite (NO2) Take a water sample of 5 ml.Add 5 droplets of NO2 test liquid and shake the test tube.Wait 5 minutes and then determine the NO2 value using the colour chart.

62,00 EUR*

Water test set for KH - GH - NO3 / 100 tests each

Instruction: Carbonate hardness (KH) Take a water sample of 5 ml water.Add 1 drop of KH liquid and shake the test tube. The water sample turns light blue; if it turns yellow, the KH value of the water is below 1 ° DH . Then add 1 drop of KH test liquid at a time and shake the test tube until the water sample turns yellow.The number of drops needed to change the colour from blue to yellow indicates the KH value in ° DH. (Example: 2 drops=2 ° DH , 3 drops=3 ° DH etc.) Instructions: Total hardness (GH) Take a water sample of 5 ml water.Add 5 drops of GH-1 liquid and shake the test tube. The water sample turns dark red to purple.Add 1 droplet of GH-2 liquid and shake the test tube until the water sample turns blue. The number of drops, , that were necessary to change the colour from dark red / violet to blue indicates the GH value in ° DH. (Example: 2 drops=2 ° DH , 3 drops=3 ° DH etc.) Instruction: Nitrate ( NO3) Take a water sample of 10 ml . Add 5 droplets of NO3-1 test liquid and shake the test tube. Add 5 droplets of NO3-2 test liquid and shake the test tube.Then add 1 measuring spoon of nitrate powder. (tube with the green cap).Shake the test tube for 20 seconds. Wait 15 minutes and then determine the NO3- value of the water using the colour chart.

62,00 EUR*