TF drum filter
Function Due to the high demand, the TF -drum filter was built with an integrated pump chamber and integrated flushing pump. This means that this drum filter has a plug and play system. On request we can equip the filter with a submersible UVC and a pond pump according to your wishes.The function of the drum filter is to filter polluted water mechanically. A stainless steel screen RVS 316 of 75 micrometres separates the smallest particles from the water and leads them to the outside via a dirt drain. This filtering process is automatically regulated by a control system and monitored by probes. In the event of a malfunction, the filter automatically switches off the circulation and backwash pump. The water level is constantly monitored by a level controller. The EPS TF100 drum filter is made of very high quality PP plastic and is supplied including control unit, level controller, cover, channel flushing, built-in flushing pump, direct drive, built-in punp chamber and additional sockets for UVC and a second pump in an unprecedented price/performance ratio. The advantage of the EPS TF100 is that by turning over a ball valve and pressing the test button "Flush", the gutter flushing is activated and thus cleaned of foliage, thread algae etc.. The filter also has a built-in pump chamber. In the gravity version, pond pumps can be connected directly in the filter. We recommend the adjustable Vario 20,000 / 30,000 or a 60,000/70,000 tube pump. The EPS TF100 drum filter is available in both pump and gravity versions. Based on practical experience, the EPS TF100 drum filter has been modified from the PP100 and several features have been incorporated that are only available at extra cost with the PP65 or are not available at all. The EPS TF100 drum filter can also be supplied as a plug-in system complete with built-in submersible UVC and pond pump (power in each case as required). If installation is desired, please contact us so that we or one of our partners can respond to your individual wishes. Suitable connection accessories would be elastomer socket 110mm, elastomer end caps 110mm (if you do not need all inlets and outlets). As UV lamp we recommend our UVC 80W Amalgam. Additional options - different filter panels (filter mesh) in stainless steel RVS available on order in 43µ or 60µ (please note that with finer meshes the flow rate is 30% to 50% lower depending on the µ-thickness) - our EPS drum filters can also be custom-built to different dimensions and pipe connections according to drawings - control cable, as well as connection cable for 220V (standard 2.5m) can be extended for an extra charge if you would like individual advice, please feel free to call us on 02945 / 96950 Functions of the control unit: - Plug location for circulation and rinsing pump - Plug and Play via sensor with measuring pins - automatic cleaning - Switch for on/off incl. emergency switch - Button for manual flushing - Flushing is triggered by probes (level of probes adjustable) - Rotation time/ rinsing time adjustable - CE mark - Detailed instructions for use are included - Cleaning is adjustable ( time and duration ) - Dry-running protection for the pond pump - Dry-running protection for circulation and flushing pump - Connections for sensor and safety switch Why EPS drum filters? after 30 years of experience and many purchased and self-tested filter systems from different suppliers, we decided to build our own drum filter series. There are stainless steel, PE and PP drum filters on the market. Some of the stainless steel filters were notable for their poor workmanship (cheap tank connectors that leaked, broke off or had rust defects). PE filters caused big problems when exposed to sunlight (bending and warping of the material) Many drum filters do not have a direct drive and are driven by pinions, V-belts or toothed belts. The use of salt also became problematic. In our view, these are all weak points that can lead to malfunctions. For these reasons, we decided to build PP filters that do not deform, are acid-resistant and are operated with a direct drive. After an intensive test period of approx. 6 years in our own KOI facility, which consists of approx. 60 tanks of various sizes, with full fish stocking and abundant feeding every day, we started series production. All the problems mentioned are now a thing of the past - We love clear water and healthy fish EPS drum filters reduce the need for cleaning and maintenance in fish farms and garden ponds to a minimum. The processing is carried out using the latest technology such as CNC machines, which guarantees quality and precision. The systems can be used in the koi and/or swimming pond sector as well as in fish farming, industry and public areas. The new control system is pre-set in the factory with a water-saving function, whereby the first contact at the probes causes the drum to rotate half a turn without rinsing. At the second contact at the probes, the drum is rotated a full revolution and cleaned completely. This reduces electricity and water consumption.Dispatch by Euro pallet 140x100x100 cm.You can convince yourself of the quality at any time in our showroom We are looking forward to your visit
Function Due to the high demand, the TF -drum filter was built with an integrated pump chamber and integrated flushing pump. This means that this drum filter has a plug and play system. On request we can equip the filter with a submersible UVC and a pond pump according to your wishes.The function of the drum filter is to filter polluted water mechanically. A stainless steel screen RVS 316 of 75 micrometres separates the smallest particles from the water and leads them to the outside via a dirt drain. This filtering process is automatically regulated by a control system and monitored by probes. In the event of a malfunction, the filter automatically switches off the circulation and backwash pump. The water level is constantly monitored by a level controller. The EPS TF100 drum filter is made of very high quality PP plastic and is supplied including control unit, level controller, cover, channel flushing, built-in flushing pump, direct drive, built-in punp chamber and additional sockets for UVC and a second pump in an unprecedented price/performance ratio. The advantage of the EPS TF100 is that by turning over a ball valve and pressing the test button "Flush", the gutter flushing is activated and thus cleaned of foliage, thread algae etc.. The filter also has a built-in pump chamber. In the gravity version, pond pumps can be connected directly in the filter. We recommend the adjustable Vario 20,000 / 30,000 or a 60,000/70,000 tube pump. The EPS TF100 drum filter is available in both pump and gravity versions. Based on practical experience, the EPS TF100 drum filter has been modified from the PP100 and several features have been incorporated that are only available at extra cost with the PP65 or are not available at all. The EPS TF100 drum filter can also be supplied as a plug-in system complete with built-in submersible UVC and pond pump (power in each case as required). If installation is desired, please contact us so that we or one of our partners can respond to your individual wishes. Suitable connection accessories would be elastomer socket 110mm, elastomer end caps 110mm (if you do not need all inlets and outlets). As UV lamp we recommend our UVC 80W Amalgam. Additional options - different filter panels (filter mesh) in stainless steel RVS available on order in 43µ or 60µ (please note that with finer meshes the flow rate is 30% to 50% lower depending on the µ-thickness) - our EPS drum filters can also be custom-built to different dimensions and pipe connections according to drawings - control cable, as well as connection cable for 220V (standard 2.5m) can be extended for an extra charge if you would like individual advice, please feel free to call us on 02945 / 96950 Functions of the control unit: - Plug location for circulation and rinsing pump - Plug and Play via sensor with measuring pins - automatic cleaning - Switch for on/off incl. emergency switch - Button for manual flushing - Flushing is triggered by probes (level of probes adjustable) - Rotation time/ rinsing time adjustable - CE mark - Detailed instructions for use are included - Cleaning is adjustable ( time and duration ) - Dry-running protection for the pond pump - Dry-running protection for circulation and flushing pump - Connections for sensor and safety switch Why EPS drum filters? after 30 years of experience and many purchased and self-tested filter systems from different suppliers, we decided to build our own drum filter series. There are stainless steel, PE and PP drum filters on the market. Some of the stainless steel filters were notable for their poor workmanship (cheap tank connectors that leaked, broke off or had rust defects). PE filters caused big problems when exposed to sunlight (bending and warping of the material) Many drum filters do not have a direct drive and are driven by pinions, V-belts or toothed belts. The use of salt also became problematic. In our view, these are all weak points that can lead to malfunctions. For these reasons, we decided to build PP filters that do not deform, are acid-resistant and are operated with a direct drive. After an intensive test period of approx. 6 years in our own KOI facility, which consists of approx. 60 tanks of various sizes, with full fish stocking and abundant feeding every day, we started series production. All the problems mentioned are now a thing of the past - We love clear water and healthy fish EPS drum filters reduce the need for cleaning and maintenance in fish farms and garden ponds to a minimum. The processing is carried out using the latest technology such as CNC machines, which guarantees quality and precision. The systems can be used in the koi and/or swimming pond sector as well as in fish farming, industry and public areas. The new control system is pre-set in the factory with a water-saving function, whereby the first contact at the probes causes the drum to rotate half a turn without rinsing. At the second contact at the probes, the drum is rotated a full revolution and cleaned completely. This reduces electricity and water consumption.Dispatch by Euro pallet 140x100x100 cm.You can convince yourself of the quality at any time in our showroom We are looking forward to your visit
Function Due to the high demand, the TF -drum filter was built with an integrated pump chamber and integrated flushing pump. This means that this drum filter has a plug and play system. On request, we can equip the filter with a submersible UVC and a pond pump according to your wishes. The function of the drum filter is to filter polluted water mechanically. Smallest particles are separated from the water by a stainless steel screen RVS 316 of 75 micrometres and led to the outside via a dirt drain. This filtering process is automatically regulated by a control system and monitored by probes. In the event of a malfunction, the filter automatically switches off the circulation and backwash pump. The water level is constantly monitored by a level controller. The EPS TF35 drum filter is made of very high quality PP plastic and is supplied including control unit, level controller, emergency cover switch, cover, channel flushing, built-in flushing pump, direct drive, built-in punch chamber and additional sockets for UVC and a second pump in an unprecedented price/performance ratio. The advantage of the EPS TF35 is that by turning over a ball valve and pressing the test button "Flush", the gutter flushing is activated and thus cleaned of leaves, thread algae etc.. The filter also has a built-in pump chamber. In the gravity version, pond pumps can be connected directly in the filter. The adjustable Vario 20.000 / 30.000 is recommended here. The EPS TF35 drum filter is available in both pump and gravity versions. Based on practical experience, the EPS TF35 drum filter has been modified from the PP35 and several features have been incorporated that are only available at extra cost with the PP35 or are not available at all. The EPS TF35 drum filter can also be supplied as a plug-in system complete with built-in submersible UVC and pond pump (power in each case as required). If installation is required, please contact us so that we or one of our partners can respond to your individual wishes. Suitable connection accessories would be elastomer socket 110mm, elastomer end caps 110mm (if you do not need all inlets and outlets). As UV lamp we recommend our submersible UVC 40W Amalgam. Additional options - different filter panels (filter mesh) in stainless steel RVS available to order in 43µ or 60µ (please note that with finer mesh the flow rate is 30% to 50% lower depending on the µ-thickness) - our EPS drum filters can also be custom-built to different dimensions and pipe connections according to drawings - control cable, as well as connection cable for 220V (standard 2.5m) can be extended for an extra charge if you would like individual advice, please feel free to call us on 02945 / 96950 Functions of the control unit: - Plug location for circulation and rinsing pump - Plug and Play via sensor with measuring pins - automatic cleaning - Switch for on/off incl. emergency switch - Button for manual flushing - Flushing is triggered by probes (level of probes adjustable) - Rotation time/ rinsing time adjustable - CE mark - Detailed instructions for use are included - Cleaning is adjustable ( time and duration ) - Dry-running protection for the pond pump - Dry-running protection for circulation and flushing pump - Connections for sensor and safety switch Why EPS drum filters? after 30 years of experience and many purchased and self-tested filter systems from different suppliers, we decided to build our own drum filter series. There are stainless steel, PE and PP drum filters on the market. Some of the stainless steel filters were notable for their poor workmanship (cheap tank connectors that leaked, broke off or had rust defects). PE filters caused big problems when exposed to sunlight (bending and warping of the material) Many drum filters do not have a direct drive and are driven by pinions, V-belts or toothed belts. In our view, these are all weak points that can lead to malfunctions. For these reasons, we decided to build PP filters that do not deform, are acid-resistant and are operated with a direct drive. After an intensive test period of approx. 6 years in our own KOI facility, which consists of approx. 60 tanks of various sizes, with full fish stocking and abundant feeding every day, we started series production. All the problems mentioned are now a thing of the past - We love clear water and healthy fish EPS drum filters reduce the need for cleaning and maintenance in fish farms and garden ponds to a minimum. The processing is carried out using the latest technology such as CNC machines, which guarantees quality and precision. The systems can be used in the koi and/or swimming pond sector as well as in fish farming, industry and public areas.The new control system is pre-set in the factory with a water-saving function, whereby the first contact at the probes causes the drum to rotate half a turn without rinsing. At the second contact on the probes, the drum is rotated a full revolution and cleaned completely. This reduces electricity and water consumption.Dispatch by Euro pallet 120x80x100You can convince yourself of the quality at any time in our showroom We look forward to your visit
Function Due to the high demand, the TF -drum filter was built with an integrated pump chamber and integrated flushing pump. This means that this drum filter has a plug and play system. On request, we can equip the filter with a submersible UVC and a pond pump according to your wishes. The function of the drum filter is to filter polluted water mechanically. Smallest particles are separated from the water by a stainless steel screen RVS 316 of 75 micrometres and led to the outside via a dirt drain. This filtering process is automatically regulated by a control system and monitored by probes. In the event of a malfunction, the filter automatically switches off the circulation and backwash pump. The water level is constantly monitored by a level controller. The EPS TF35 drum filter is made of very high quality PP plastic and is supplied including control unit, level controller, emergency cover switch, cover, channel flushing, built-in flushing pump, direct drive, built-in punch chamber and additional sockets for UVC and a second pump in an unprecedented price/performance ratio. The advantage of the EPS TF35 is that by turning over a ball valve and pressing the test button "Flush", the gutter flushing is activated and thus cleaned of leaves, thread algae etc.. The filter also has a built-in pump chamber. In the gravity version, pond pumps can be connected directly in the filter. The adjustable Vario 20.000 / 30.000 is recommended here. The EPS TF35 drum filter is available in both pump and gravity versions. Based on practical experience, the EPS TF35 drum filter has been modified from the PP35 and several features have been incorporated that are only available at extra cost with the PP35 or are not available at all. The EPS TF35 drum filter can also be supplied as a plug-in system complete with built-in submersible UVC and pond pump (power in each case as required). If installation is required, please contact us so that we or one of our partners can respond to your individual wishes. Suitable connection accessories would be elastomer socket 110mm, elastomer end caps 110mm (if you do not need all inlets and outlets). As UV lamp we recommend our submersible UVC 40W Amalgam. Additional options - different filter panels (filter mesh) in stainless steel RVS available to order in 43µ or 60µ (please note that with finer mesh the flow rate is 30% to 50% lower depending on the µ-thickness) - our EPS drum filters can also be custom-built to different dimensions and pipe connections according to drawings - control cable, as well as connection cable for 220V (standard 2.5m) can be extended for an extra charge if you would like individual advice, please feel free to call us on 02945 / 96950 Functions of the control unit: - Plug location for circulation and rinsing pump - Plug and Play via sensor with measuring pins - automatic cleaning - Switch for on/off incl. emergency switch - Button for manual flushing - Flushing is triggered by probes (level of probes adjustable) - Rotation time/ rinsing time adjustable - CE mark - Detailed instructions for use are included - Cleaning is adjustable ( time and duration ) - Dry-running protection for the pond pump - Dry-running protection for circulation and flushing pump - Connections for sensor and safety switch Why EPS drum filters? after 30 years of experience and many purchased and self-tested filter systems from different suppliers, we decided to build our own drum filter series. There are stainless steel, PE and PP drum filters on the market. Some of the stainless steel filters were notable for their poor workmanship (cheap tank connectors that leaked, broke off or had rust defects). PE filters caused big problems when exposed to sunlight (bending and warping of the material) Many drum filters do not have a direct drive and are driven by pinions, V-belts or toothed belts. In our view, these are all weak points that can lead to malfunctions. For these reasons, we decided to build PP filters that do not deform, are acid-resistant and are operated with a direct drive. After an intensive test period of approx. 6 years in our own KOI facility, which consists of approx. 60 tanks of various sizes, with full fish stocking and abundant feeding every day, we started series production. All the problems mentioned are now a thing of the past - We love clear water and healthy fish EPS drum filters reduce the need for cleaning and maintenance in fish farms and garden ponds to a minimum. The processing is carried out using the latest technology such as CNC machines, which guarantees quality and precision. The systems can be used in the koi and/or swimming pond sector as well as in fish farming, industry and public areas.The new control system is pre-set in the factory with a water-saving function, whereby the first contact at the probes causes the drum to rotate half a turn without rinsing. At the second contact on the probes, the drum is rotated a full revolution and cleaned completely. This reduces electricity and water consumption.Dispatch by Euro pallet 120x80x100You can convince yourself of the quality at any time in our showroom We look forward to your visit
Function Due to the high demand, the TF -drum filter was built with an integrated pump chamber and integrated flushing pump. This means that this drum filter has a plug and play system. On request, we can equip the filter with a submersible UVC and a pond pump according to your wishes. The function of the drum filter is to filter polluted water mechanically. Smallest particles are separated from the water by a stainless steel screen RVS 316 of 75 micrometres and led to the outside via a dirt drain. This filtering process is automatically regulated by a control system and monitored by probes. In the event of a malfunction, the filter automatically switches off the circulation and backwash pump. The water level is constantly monitored by a level controller. The EPS TF35 drum filter is made of very high quality PP plastic and is supplied including control unit, level controller, emergency cover switch, cover, channel flushing, built-in flushing pump, direct drive, built-in punch chamber and additional sockets for UVC and a second pump in an unprecedented price/performance ratio. The advantage of the EPS TF35 is that by turning over a ball valve and pressing the test button "Flush", the gutter flushing is activated and thus cleaned of leaves, thread algae etc.. The filter also has a built-in pump chamber. In the gravity version, pond pumps can be connected directly in the filter. The adjustable Vario 20.000 / 30.000 is recommended here. The EPS TF35 drum filter is available in both pump and gravity versions. Based on practical experience, the EPS TF35 drum filter has been modified from the PP35 and several features have been incorporated that are only available at extra cost with the PP35 or are not available at all. The EPS TF35 drum filter can also be supplied as a plug-in system complete with built-in submersible UVC and pond pump (power in each case as required). If installation is required, please contact us so that we or one of our partners can respond to your individual wishes. Suitable connection accessories would be elastomer socket 110mm, elastomer end caps 110mm (if you do not need all inlets and outlets). As UV lamp we recommend our submersible UVC 40W Amalgam. Additional options - different filter panels (filter mesh) in stainless steel RVS available to order in 43µ or 60µ (please note that with finer mesh the flow rate is 30% to 50% lower depending on the µ-thickness) - our EPS drum filters can also be custom-built to different dimensions and pipe connections according to drawings - control cable, as well as connection cable for 220V (standard 2.5m) can be extended for an extra charge if you would like individual advice, please feel free to call us on 02945 / 96950 Functions of the control unit: - Plug location for circulation and rinsing pump - Plug and Play via sensor with measuring pins - automatic cleaning - Switch for on/off incl. emergency switch - Button for manual flushing - Flushing is triggered by probes (level of probes adjustable) - Rotation time/ rinsing time adjustable - CE mark - Detailed instructions for use are included - Cleaning is adjustable ( time and duration ) - Dry-running protection for the pond pump - Dry-running protection for circulation and flushing pump - Connections for sensor and safety switch Why EPS drum filters? after 30 years of experience and many purchased and self-tested filter systems from different suppliers, we decided to build our own drum filter series. There are stainless steel, PE and PP drum filters on the market. Some of the stainless steel filters were notable for their poor workmanship (cheap tank connectors that leaked, broke off or had rust defects). PE filters caused big problems when exposed to sunlight (bending and warping of the material) Many drum filters do not have a direct drive and are driven by pinions, V-belts or toothed belts. In our view, these are all weak points that can lead to malfunctions. For these reasons, we decided to build PP filters that do not deform, are acid-resistant and are operated with a direct drive. After an intensive test period of approx. 6 years in our own KOI facility, which consists of approx. 60 tanks of various sizes, with full fish stocking and abundant feeding every day, we started series production. All the problems mentioned are now a thing of the past - We love clear water and healthy fish EPS drum filters reduce the need for cleaning and maintenance in fish farms and garden ponds to a minimum. The processing is carried out using the latest technology such as CNC machines, which guarantees quality and precision. The systems can be used in the koi and/or swimming pond sector as well as in fish farming, industry and public areas.The new control system is pre-set in the factory with a water-saving function, whereby the first contact at the probes causes the drum to rotate half a turn without rinsing. At the second contact on the probes, the drum is rotated a full revolution and cleaned completely. This reduces electricity and water consumption.Dispatch by Euro pallet 120x80x100You can convince yourself of the quality at any time in our showroom We look forward to your visit
Function Due to the high demand, the TF -drum filter was built with an integrated pump chamber and integrated flushing pump. This means that this drum filter has a plug and play system. On request, we can equip the filter with a submersible UVC and a pond pump according to your wishes. The function of the drum filter is to filter polluted water mechanically. Smallest particles are separated from the water by a stainless steel screen RVS 316 of 75 micrometres and led to the outside via a dirt drain. This filtering process is automatically regulated by a control system and monitored by probes. In the event of a malfunction, the filter automatically switches off the circulation and backwash pump. The water level is constantly monitored by a level controller. The EPS TF35 drum filter is made of very high quality PP plastic and is supplied including control unit, level controller, emergency cover switch, cover, channel flushing, built-in flushing pump, direct drive, built-in punch chamber and additional sockets for UVC and a second pump in an unprecedented price/performance ratio. The advantage of the EPS TF35 is that by turning over a ball valve and pressing the test button "Flush", the gutter flushing is activated and thus cleaned of leaves, thread algae etc.. The filter also has a built-in pump chamber. In the gravity version, pond pumps can be connected directly in the filter. The adjustable Vario 20.000 / 30.000 is recommended here. The EPS TF35 drum filter is available in both pump and gravity versions. Based on practical experience, the EPS TF35 drum filter has been modified from the PP35 and several features have been incorporated that are only available at extra cost with the PP35 or are not available at all. The EPS TF35 drum filter can also be supplied as a plug-in system complete with built-in submersible UVC and pond pump (power in each case as required). If installation is required, please contact us so that we or one of our partners can respond to your individual wishes. Suitable connection accessories would be elastomer socket 110mm, elastomer end caps 110mm (if you do not need all inlets and outlets). As UV lamp we recommend our submersible UVC 40W Amalgam. Additional options - different filter panels (filter mesh) in stainless steel RVS available to order in 43µ or 60µ (please note that with finer mesh the flow rate is 30% to 50% lower depending on the µ-thickness) - our EPS drum filters can also be custom-built to different dimensions and pipe connections according to drawings - control cable, as well as connection cable for 220V (standard 2.5m) can be extended for an extra charge if you would like individual advice, please feel free to call us on 02945 / 96950 Functions of the control unit: - Plug location for circulation and rinsing pump - Plug and Play via sensor with measuring pins - automatic cleaning - Switch for on/off incl. emergency switch - Button for manual flushing - Flushing is triggered by probes (level of probes adjustable) - Rotation time/ rinsing time adjustable - CE mark - Detailed instructions for use are included - Cleaning is adjustable ( time and duration ) - Dry-running protection for the pond pump - Dry-running protection for circulation and flushing pump - Connections for sensor and safety switch Why EPS drum filters? after 30 years of experience and many purchased and self-tested filter systems from different suppliers, we decided to build our own drum filter series. There are stainless steel, PE and PP drum filters on the market. Some of the stainless steel filters were notable for their poor workmanship (cheap tank connectors that leaked, broke off or had rust defects). PE filters caused big problems when exposed to sunlight (bending and warping of the material) Many drum filters do not have a direct drive and are driven by pinions, V-belts or toothed belts. In our view, these are all weak points that can lead to malfunctions. For these reasons, we decided to build PP filters that do not deform, are acid-resistant and are operated with a direct drive. After an intensive test period of approx. 6 years in our own KOI facility, which consists of approx. 60 tanks of various sizes, with full fish stocking and abundant feeding every day, we started series production. All the problems mentioned are now a thing of the past - We love clear water and healthy fish EPS drum filters reduce the need for cleaning and maintenance in fish farms and garden ponds to a minimum. The processing is carried out using the latest technology such as CNC machines, which guarantees quality and precision. The systems can be used in the koi and/or swimming pond sector as well as in fish farming, industry and public areas.The new control system is pre-set in the factory with a water-saving function, whereby the first contact at the probes causes the drum to rotate half a turn without rinsing. At the second contact on the probes, the drum is rotated a full revolution and cleaned completely. This reduces electricity and water consumption.Dispatch by Euro pallet 120x80x100You can convince yourself of the quality at any time in our showroom We look forward to your visit
Function Due to the high demand, the TF -drum filter was built with an integrated pump chamber and integrated flushing pump. This means that this drum filter has a plug and play system. On request, we can equip the filter with a submersible UVC and a pond pump according to your wishes. The function of the drum filter is to filter polluted water mechanically. Smallest particles are separated from the water by a stainless steel screen RVS 316 of 75 micrometres and led to the outside via a dirt drain. This filtering process is automatically regulated by a control system and monitored by probes. In the event of a malfunction, the filter automatically switches off the circulation and backwash pump. The water level is constantly monitored by a level controller. The EPS TF65 drum filter is made of very high quality PP plastic and is supplied including control unit, level controller, emergency cover switch, cover, channel flushing, built-in flushing pump, direct drive, built-in punp chamber and additional sockets for UVC and a second pump in an unprecedented price/performance ratio. The advantage of the EPS TF65 is that by turning a ball valve and pressing the test button "Flush", the gutter flushing is activated and thus cleaned of foliage, thread algae etc. The filter also has a built-in pump chamber. In the gravity version, pond pumps can be connected directly in the filter. The adjustable Vario20.000 / 30.000 is recommended here or a 60,000/70,000 tube pump. The EPS TF65 drum filter is available in both pump and gravity versions. Based on practical experience, the EPS TF65 drum filter has been modified from the PP65 and several features have been incorporated that are only available at extra cost with the PP65 or are not available at all. The EPS TF65 drum filter can also be supplied as a plug-in system complete with built-in submersible UVC and pond pump (power in each case as required). If installation is required, please contact us so that we or one of our partners can respond to your individual wishes. Suitable connection accessories would be elastomer sleeve 110mm , elastomer end caps 110mm (if you do not need all inlets and outlets). As UV lamp we recommend our submersible UVC 48W Amalgam. Additional options - different filter panels (filter mesh) in stainless steel RVS available to order in 43µ or 60µ (please note that with finer mesh the flow rate is 30% to 50% lower depending on µ-thickness) - our EPS drum filters can also be custom-built to different dimensions and pipe connections according to drawings - control cable, as well as connection cable for 220V (standard 2.5m) can be extended for an extra charge if you would like individual advice, please feel free to call us on 02945 / 96950 Functions of the control unit: - Plug location for circulation and rinsing pump - Plug and Play via sensor with measuring pins - automatic cleaning - Switch for on/off incl. emergency switch - Button for manual flushing - Flushing is triggered by probes (level of probes adjustable) - Rotation time/ rinsing time adjustable - CE mark - Detailed instructions for use are included - Cleaning is adjustable ( time and duration ) - Dry-running protection for the pond pump - Dry-running protection for circulation and flushing pump - Connections for sensor and safety switch Why EPS drum filters? after 30 years of experience and many purchased and self-tested filter systems from different suppliers, we decided to build our own drum filter series. There are stainless steel, PE and PP drum filters on the market. Some of the stainless steel filters were notable for their poor workmanship (cheap tank connectors that leaked, broke off or had rust defects). PE filters caused big problems when exposed to sunlight (bending and warping of the material) Many drum filters do not have a direct drive and are driven by pinions, V-belts or toothed belts. The use of salt also became problematic. In our view, these are all weak points that can lead to malfunctions. For these reasons, we decided to build PP filters that do not deform, are acid-resistant and are operated with a direct drive. After an intensive test period of approx. 6 years in our own KOI facility, which consists of approx. 60 tanks of various sizes, with full fish stocking and abundant feeding every day, we started series production. All these problems are now a thing of the past - We love clear water and healthy fish EPS drum filters reduce the need for cleaning and maintenance in fish farms and garden ponds to a minimum. The processing is done with the most modern technology such as CNC machines, which guarantees quality and precision. The systems can be used in the koi and/or swimming pond sector as well as in fish farming, industry and public areas.The new control system is pre-set in the factory with a water-saving function, whereby the first contact at the probes causes the drum to rotate half a turn without rinsing. At the second contact on the probes, the drum is rotated a full revolution and cleaned completely. This reduces electricity and water consumption.You can convince yourself of the quality at any time in our showroom Shipment by Euro pallet 120x100x100 cmWe look forward to your visit
Function Due to the high demand, the TF -drum filter was built with an integrated pump chamber and integrated flushing pump. This means that this drum filter has a plug and play system. On request, we can equip the filter with a submersible UVC and a pond pump according to your wishes. The function of the drum filter is to filter polluted water mechanically. Smallest particles are separated from the water by a stainless steel screen RVS 316 of 75 micrometres and led to the outside via a dirt drain. This filtering process is automatically regulated by a control system and monitored by probes. In the event of a malfunction, the filter automatically switches off the circulation and backwash pump. The water level is constantly monitored by a level controller. The EPS TF65 drum filter is made of very high quality PP plastic and is supplied including control unit, level controller, emergency cover switch, cover, channel flushing, built-in flushing pump, direct drive, built-in punp chamber and additional sockets for UVC and a second pump in an unprecedented price/performance ratio. The advantage of the EPS TF65 is that by turning a ball valve and pressing the test button "Flush", the gutter flushing is activated and thus cleaned of foliage, thread algae etc. The filter also has a built-in pump chamber. In the gravity version, pond pumps can be connected directly in the filter. The adjustable Vario20.000 / 30.000 is recommended here or a 60,000/70,000 tube pump. The EPS TF65 drum filter is available in both pump and gravity versions. Based on practical experience, the EPS TF65 drum filter has been modified from the PP65 and several features have been incorporated that are only available at extra cost with the PP65 or are not available at all. The EPS TF65 drum filter can also be supplied as a plug-in system complete with built-in submersible UVC and pond pump (power in each case as required). If installation is required, please contact us so that we or one of our partners can respond to your individual wishes. Suitable connection accessories would be elastomer sleeve 110mm , elastomer end caps 110mm (if you do not need all inlets and outlets). As UV lamp we recommend our submersible UVC 48W Amalgam. Additional options - different filter panels (filter mesh) in stainless steel RVS available to order in 43µ or 60µ (please note that with finer mesh the flow rate is 30% to 50% lower depending on µ-thickness) - our EPS drum filters can also be custom-built to different dimensions and pipe connections according to drawings - control cable, as well as connection cable for 220V (standard 2.5m) can be extended for an extra charge if you would like individual advice, please feel free to call us on 02945 / 96950 Functions of the control unit: - Plug location for circulation and rinsing pump - Plug and Play via sensor with measuring pins - automatic cleaning - Switch for on/off incl. emergency switch - Button for manual flushing - Flushing is triggered by probes (level of probes adjustable) - Rotation time/ rinsing time adjustable - CE mark - Detailed instructions for use are included - Cleaning is adjustable ( time and duration ) - Dry-running protection for the pond pump - Dry-running protection for circulation and flushing pump - Connections for sensor and safety switch Why EPS drum filters? after 30 years of experience and many purchased and self-tested filter systems from different suppliers, we decided to build our own drum filter series. There are stainless steel, PE and PP drum filters on the market. Some of the stainless steel filters were notable for their poor workmanship (cheap tank connectors that leaked, broke off or had rust defects). PE filters caused big problems when exposed to sunlight (bending and warping of the material) Many drum filters do not have a direct drive and are driven by pinions, V-belts or toothed belts. The use of salt also became problematic. In our view, these are all weak points that can lead to malfunctions. For these reasons, we decided to build PP filters that do not deform, are acid-resistant and are operated with a direct drive. After an intensive test period of approx. 6 years in our own KOI facility, which consists of approx. 60 tanks of various sizes, with full fish stocking and abundant feeding every day, we started series production. All these problems are now a thing of the past - We love clear water and healthy fish EPS drum filters reduce the need for cleaning and maintenance in fish farms and garden ponds to a minimum. The processing is done with the most modern technology such as CNC machines, which guarantees quality and precision. The systems can be used in the koi and/or swimming pond sector as well as in fish farming, industry and public areas.The new control system is pre-set in the factory with a water-saving function, whereby the first contact at the probes causes the drum to rotate half a turn without rinsing. At the second contact on the probes, the drum is rotated a full revolution and cleaned completely. This reduces electricity and water consumption.You can convince yourself of the quality at any time in our showroom Shipment by Euro pallet 120x100x100 cmWe look forward to your visit