Adjustable pumps with controller
Die Teichpumpen der AF DM-E Serie sind ideal geeignet für Koi- und Gartenteiche, sowie für den Einsatz in Aquarien. Die Pumpen sind ausgestattet mit der neuesten Technologie der bürstenlosen Permanentmagnetmotoren. Diese Technologie gewährleistet hohe Leistung und geringen Stromverbrauch. Geeignet für nass- und Trockenaufstellung (aber unter dem Wasserspiegel). Geeignet für Filter, Wasserfälle, Wasserläufe, usw. Ein steuerbarer Durchfluss ist möglich mit einem optionalen Controller.
Controller / Regler / Steuerkasten für AF DM-10000 Vario. Bitte beachten Sie, dass dieser Controller NUR für die AF DM-10000 Vario geeignet ist und NICHT für die O-Serie.
Controller / Regler / Steuerkasten für AF DM-22000S Vario. Bitte beachten Sie, dass dieser Controller NUR für die AF DM Vario (S) Serie geeignet ist und NICHT für die O-Serie.
Controller / Regler / Steuerkasten für AF DM-30000 Vario. Bitte beachten Sie, dass dieser Controller NUR für die AF DM-30000 Vario geeignet ist und NICHT für die O-Serie.
Controller für Teichpumpe EASY 40000 l/h
Controller für Teichpumpe OHE 10000VX regelbar
Controller für Teichpumpe OHE 22000VX regelbar
Controller für Teichpumpe OHE 30000VX regelbar
Technical data: - Dry-running protection- low energy consumption- for fresh and salt water- also suitable for dry installation (inlet must be below water level, as not self-priming!).- can pump dirt particles up to 6 mm- Voltage: 220-240 V 50 Hz- Pmax.: 360 watts- Threaded connection: 2.5"/2.5"- Hose connection 3/4", 1", 1 1/4", 1 1/2"- Qmax: 40,000 L/h- Hmax: 9 m- with 6m rubber cable and waterproof controller box- Dimensions: 240 mm x 390 mm x 216 mm- Weight: 7.0 kg
Pond filter and circulation pump with stainless steel suction strainer controllable with sine wave frequency converterThe controller works steplessly and thus enables very fine control behaviour as well as absolutely smooth motor running. The motors of the pumps are protected because this technology eliminates bearing currents. The delivery rate is adjustable from approx. 30 % to 100 %. The power consumption is between approx. 40 % and 100 % of the nominal power.Dirt particles up to Ø 8 mm are conveyed. The pumps are suitable for freshwater and seawater. By means of a wired external remote control unit (controller), the pump is switched on or off and the pumping capacity (motor power and power consumption) is infinitely variable.In the event of a power failure, the last values stored in the controller are retained.
La nouvelle série de pompes réglables à un prix très intéressant ! Les pompes DM-Vario sont fabriquées pour être utilisées à l'extérieur et peuvent être installées à l'eau ou à sec. Grâce au contrôleur externe, tu peux régler le débit (et donc la consommation d'énergie) de 30% à 100% de puissance. Le contrôleur permet également d'arrêter la pompe (bouton de pause). Cette pompe a un moteur synchrone et est équipée d'un arbre en céramique à faible usure. La pompe s'arrête automatiquement s'il n'y a pas assez d'eau dans le rotor. En cas de blocage de la roue, la pompe se met automatiquement en position "lock". Aucune autre électricité n'est alors consommée. La pompe attend jusqu'à ce que le blocage soit éliminé. Cela évite une surchauffe du moteur.
La nouvelle série de pompes réglables à un prix très intéressant ! Les pompes DM-Vario sont fabriquées pour être utilisées à l'extérieur et peuvent être installées à l'eau ou à sec. Grâce au contrôleur externe, tu peux régler le débit (et donc la consommation d'énergie) de 30% à 100% de puissance. Le contrôleur permet également d'arrêter la pompe (bouton de pause). Cette pompe a un moteur synchrone et est équipée d'un arbre en céramique à faible usure. La pompe s'arrête automatiquement s'il n'y a pas assez d'eau dans le rotor. En cas de blocage de la roue, la pompe se met automatiquement en position "lock". Aucune autre électricité n'est alors consommée. La pompe attend jusqu'à ce que le blocage soit éliminé. Cela évite une surchauffe du moteur.
The new series of adjustable pumps at a very interesting price! The DM-Vario pumps are made for outdoor use and can be installed wet or dry. By means of the external controller, you can adjust the flow (and thus also the power consumption) from 30% to 100% power. The controller can also be used to switch off the pump (pause button). This pump has a synchronous motor and is equipped with a low-wear ceramic shaft. The pump switches off automatically if there is not enough water in the rotor. If the impeller is blocked, the pump automatically switches to a "lock" position. No further power is then consumed. The pump waits until the blockage has been removed. This prevents the motor from overheating.
The new series of adjustable pumps at a very interesting price! The DM-Vario pumps are made for outdoor use and can be installed wet or dry. By means of the external controller, you can adjust the flow (and thus also the power consumption) from 30% to 100% power. The controller can also be used to switch off the pump (pause button). This pump has a synchronous motor and is equipped with a low-wear ceramic shaft. The pump switches off automatically if there is not enough water in the rotor. If the impeller is blocked, the pump automatically switches to a "lock" position. No further power is then consumed. The pump waits until the blockage has been removed. This prevents the motor from overheating.
The new series of adjustable pumps at a very interesting price! The DM-Vario pumps are made for outdoor use and can be installed wet or dry. By means of the external controller, you can adjust the flow (and thus also the power consumption) from 30% to 100% power. The controller can also be used to switch off the pump (pause button). This pump has a synchronous motor and is equipped with a low-wear ceramic shaft. The pump switches off automatically if there is not enough water in the rotor. If the impeller is blocked, the pump automatically switches to a "lock" position. No further power is then consumed. The pump waits until the blockage has been removed. This prevents the motor from overheating.
The new series of adjustable pumps at a very interesting price! The DM-Vario pumps are made for outdoor use and can be installed wet or dry. By means of the external controller, you can adjust the flow (and thus also the power consumption) from 30% to 100% power. The controller can also be used to switch off the pump (pause button). This pump has a synchronous motor and is equipped with a low-wear ceramic shaft. The pump switches off automatically if there is not enough water in the rotor. If the impeller is blocked, the pump automatically switches to a "lock" position. No further power is then consumed. The pump waits until the blockage has been removed. This prevents the motor from overheating.
The new series of adjustable pumps at a very interesting price! The DM-Vario pumps are made for outdoor use and can be installed wet or dry. By means of the external controller, you can adjust the flow (and thus also the power consumption) from 30% to 100% power. The controller can also be used to switch off the pump (pause button). This pump has a synchronous motor and is equipped with a low-wear ceramic shaft. The pump switches off automatically if there is not enough water in the rotor. If the impeller is blocked, the pump automatically switches to a "lock" position. No further power is then consumed. The pump waits until the blockage has been removed. This prevents the motor from overheating.
The new series of adjustable pumps at a very interesting price! The DM-Vario pumps are made for outdoor use and can be installed wet or dry. By means of the external controller, you can adjust the flow (and thus also the power consumption) from 30% to 100% power. The controller can also be used to switch off the pump (pause button). This pump has a synchronous motor and is equipped with a low-wear ceramic shaft. The pump switches off automatically if there is not enough water in the rotor. If the impeller is blocked, the pump automatically switches to a "lock" position. No further power is then consumed. The pump waits until the blockage has been removed. This prevents the motor from overheating.
Technical data: - Dry-running protection- low energy consumption- for fresh and salt water- also suitable for dry installation (inlet must be below water level, as not self-priming!).- can pump dirt particles up to 6 mm- Voltage: 220-240 V 50 Hz- Pmax.: 360 watts- Threaded connection: 2.5"/2.5"- Hose connection 3/4", 1", 1 1/4", 1 1/2"- Qmax: 40,000 L/h- Hmax: 9 m- with 6m rubber cable and waterproof controller box- Dimensions: 240 mm x 390 mm x 216 mm- Weight: 7.0 kg
Technical data: - Dry-running protection- low energy consumption- for fresh and salt water- also suitable for dry installation (inlet must be below water level, as not self-priming!).- can pump dirt particles up to 6 mm.- Voltage: 220-240 V 50 Hz- Pmax.: 85 Watt- Threaded connection: 2"/2"- Hose connection 3/4", 1", 1 1/4", 1 1/2"- Qmax: 12000 L/h- Hmax: 4,8 m- with 6m rubber cable and waterproof controller box- Dimensions: 185 mm x 330 mm x 190 mm- Weight: 4.725 kg
Technical data: - Dry-running protection- low energy consumption- for fresh and salt water- also suitable for dry installation (inlet must be below water level, as not self-priming!).- can pump dirt particles up to 6 mm.- Voltage: 220-240 V 50 Hz- Pmax.: 200 Watt- Threaded connection: 2"/2"- Hose connection 3/4", 1", 1 1/4", 1 1/2"- Qmax: 20,000 L/h- Hmax: 8 m- with 6m rubber cable and waterproof controller box- Dimensions: 185 mm x 330 mm x 190 mm- Weight: 4.725 kg
Technical data: - Dry-running protection- low energy consumption- for fresh and salt water- also suitable for dry installation (inlet must be below water level, as not self-priming!).- can pump dirt particles up to 6 mm.- Voltage: 220-240 V 50 Hz- Pmax.: 200 Watt- Threaded connection: 2"/2"- Hose connection 3/4", 1", 1 1/4", 1 1/2"- Qmax: 20,000 L/h- Hmax: 8 m- with 6m rubber cable and waterproof controller box- Dimensions: 185 mm x 330 mm x 190 mm- Weight: 4.725 kg
Technical data: - Dry-running protection- low energy consumption- for fresh and salt water- also suitable for dry installation (inlet must be below water level, as not self-priming!).- can pump dirt particles up to 6 mm.- Voltage: 220-240 V 50 Hz- Pmax.: 45 Watt- Threaded connection: 2"/2"- Hose connection 3/4", 1", 1 1/4", 1 1/2"- Qmax: 5000 L/h- Hmax: 3,3 m- with 6m rubber cable and waterproof controller box- Dimensions: 185 mm x 330 mm x 190 mm- Weight: 4.725 kg
Pond filter and circulation pump OHE controllable with sine wave frequency converterThe controller works steplessly and thus enables very fine control behaviour as well as absolutely smooth motor running. The motors of the pumps are protected because this technology eliminates bearing currents. The delivery rate is adjustable from approx. 30 % to 100 %. The power consumption is between approx. 40 % and 100 % of the nominal power.Dirt particles up to 8 mm dia. are conveyed. The pumps are suitable for freshwater and seawater. By means of a wired external remote control unit (controller), the pump is switched on or off and the pumping capacity (motor power and power consumption) is infinitely variable.In the event of a power failure, the last values stored in the controller are retained.