EPS Combi Drum Filter CF100 with integrated biochamber + pump chamber
8 560,00 €
Disponible, délai de livraison : 5 - 7 Tage (10 - 12 Tage bei Versand ins Ausland)
Function
Due to the high demand, the CF drum filter was built with an integrated pump chamber, biochamber and integrated flushing pump. This means that this drum filter has a plug and play system. On request, we can equip the filter with a submersible UVC and a pond pump according to your wishes. The function of the drum filter is to filter polluted water mechanically. Smallest particles are separated from the water by a stainless steel screen RVS 316 of 75 micrometres and led to the outside via a dirt drain. This filtering process is automatically regulated by a control system and monitored by probes. In the event of a malfunction, the filter automatically switches off the circulation and backwash pump. The water level is constantly monitored by probes. The EPS Combi Drum Filter CF-100 is made of very high quality PP plastic and is supplied including control, emergency cover switch, manual channel flushing, complete piping from the flushing pump to the flushing channel, level regulator, cover and built-in flushing pump in an unprecedented price/performance ratio. All inclusive.
All EPS drum filters are reinforced with a 50/50 U-profile and an inner core of 40/40 4 Kant steel pipe.
The direct drive from the motor to the drum eliminates wear parts such as V-belts, toothed belts or plastic gears.
If the dirty water channel should ever become clogged due to strong filamentous algae or leaves, it is no problem to simply dismantle and clean it without having to dismantle the filter drum or remove the mesh.
In the two integrated biochambers (128 x 55,7 x 100 cm) a Japanese air hose ( 19 mm ) is directly pre-installed for a better "moving bed" process for improved turbulence of the HX 13/17. A diaphragm pump of 100-120 L/min is required for this. We recommend either HAP series, the Secoh series or the AP series.
In addition, the biochamber has been equipped with 8 mm slots to insert HX13/17.
Please note the protected and unprotected surface of the HX13/17. According to this, the square metre of bacteria removal surface is calculated.
The CF-100 drum filter is available in both pump and gravity versions. Even if you have a gravity version, it is possible to convert it to a pump version in just a few steps (if you need help with this, we will be happy to assist you).
Instructions for the conversion are enclosed with the control box.
The fuse function or the emergency lid switch switches off the immersion UVCs directly when the lid is opened. The function is only guaranteed if they are connected via the supplied control unit.
It is recommended that the electrical connection of the control unit is protected by a residual current circuit breaker.
The control unit should not be directly exposed to moisture.
Suitable connection accessories would be Elastomer sleeve 110mm, Elastomer end caps 110mm (if you do not need all inlets and outlets). As UV lamp we recommend our submersible UVC 40 W Amalgan or Immersion UVC 80 W Amalgam.
Due to the use of deep well pumps, a flushing process is hardly audible.
Additional options
- different filter panels (filter mesh) in stainless steel RVS available to order and at extra cost in 43µ or 60µ (please note that with finer mesh the flow rate is 30% to 50% lower depending on the µ-thickness)
- our EPS drum filters can be built individually on request according to drawings at an extra charge
- individual biochambers (round or square) as well as trickle filters can be built on request in all sizes according to drawings
- if you would like individual advice, please feel free to call us on 02945 / 96950
Functions of the control system:
- Plug place for circulation and rinsing pump
- plug and play via sensor with measuring pins
- automatic cleaning
- Switch for on/off incl. emergency switch
- Button for manual flushing
- Flushing is triggered by probes (level of probes adjustable)
- Rotation time/flush time adjustable
- CE mark
- detailed instructions for use are included
- Cleaning is adjustable ( time and duration )
- Dry-running protection for the pond pump
- Dry-running protection for circulation and flushing pump
- Connections for sensor and safety switch
Why EPS drum filters?
after 30 years of experience and many purchased and self-tested filter systems from different suppliers, we decided to build our own drum filter series.
There are stainless steel, PE and PP drum filters on the market.
Some of the stainless steel filters were notable for their poor workmanship (cheap tank connectors that leaked, broke off or had rust defects).
PE filters caused big problems when exposed to sunlight (bending and warping of the material)
Many drum filters do not have a direct drive and are driven by pinions, V-belts or toothed belts.
In our view, these are all weak points that can lead to malfunctions.
For these reasons, we decided to build PP filters that do not deform, are acid-resistant and are operated with a direct drive.
After an intensive test period of approx. 6 years in our own KOI facility, which consists of approx. 60 tanks of various sizes, with full fish stocking and abundant feeding every day, we started series production.
All the problems mentioned are now a thing of the past - We love clear water and healthy fish
EPS drum filters reduce the need for cleaning and maintenance in fish farms and garden ponds to a minimum.
The processing is carried out using the latest technology such as CNC machines, which guarantees quality and precision.
The systems can be used in the koi and/or swimming pond sector as well as in fish farming, industry and public areas.
Dispatch by one-way pallet 220x100x80
The new control system is preset ex works with a water-saving function, whereby the first contact at the probes causes the drum to rotate half a turn without rinsing. At the second contact on the probes, the drum is rotated a full revolution and cleaned completely. This reduces electricity and water consumption.
You can convince yourself of the quality at any time in our showroom
We look forward to your visit
| Article type: | Drum filter |
|---|
Zubehör
This flushing pump in drum filters and is equipped with a stainless steel pump housing and multi-stage pump drive. Sand-proof up to 50 g/m³ water. With integrated non-return valve, 5 m connection cable and 21 m drain cable. The small outer diameter of only 9.6 cm allows use in narrow drilled wells from a Ø of 10 cm. For pumping water from great depths and transferring it at high pressure. The flow rate of a pump depends mainly on the delivery head. The term 'head' refers to the difference in height between the water surface and the water intake. The table above shows the performance of the flushing pump at different heads. For example, at a delivery head of 20 metres, this pump can be expected to deliver 2,100 litres per hour.
The TIP GP3000 is ideally suited as a flushing pump in drum filters and is equipped with high-quality stainless steel pump housing. It is a self-priming pump with jet hydraulic system and on/off switch. It is equipped with a maintenance-free condenser motor with thermal overload protection. Flexible locations The TIP GP3000 IS suitable for both mobile use and fixed installation. Wide range of applications The TIP GP3000 is not only used in the drum filter sector, but is also suitable, for example, for watering or sprinkling gardens, filling and emptying basins or storage tanks, cleaning terraces and pavements. Delivery rate and delivery head 40 m - 150 l/h30 m - 600 l/h20 m - 1,200 l/h10 m - 2,400 l/h The flow rate of a pump depends mainly on the delivery head. The term 'head' refers to the difference in height between the water surface and the water intake. The table above shows the performance of the TIP GP3000 at different heads. For example, at a head of 10 metres, this pump can be expected to deliver 2,400 litres per hour. Maximum number of sprinklers Garden pumps are very suitable for operating irrigation systems - such as sprinklers. This model is suitable for connecting a maximum of 1 sprinkler. This specification is based on the following standard values: Water flow at sprinkler: approx. 600 l/h. Water pressure at sprinkler: approx. 2 bar. Suction height: max. 5 m. The term 'suction height' refers to the difference in height between the water surface and the pump.
- This UVC model ensures crystal clear water.Sophisticated design and high-quality materials result in high UV-C radiation with a wavelength of exactly 253.7 nm. The high dose of radiation destroys almost all bacteria, viruses and even mould, ensuring clear, clean and healthy water. This is a spare parts set (NEW GOODS) Included in delivery are: UV lamp, quartz glass, ballast, stainless steel connectors, instructions The unit is delivered WITHOUT plug. Attention! Important safety instructions! These UV-C lamps do NOT comply with the applicable DIN standards! Therefore the kit is delivered without plug. It must be installed by an experienced and recognised specialist company in accordance with DIN EN60335. Standard protective accessories (safety goggles, gloves, etc.) must be worn during installation, assembly and commissioning. These accessories are NOT included in the kit. Always have the installation carried out by a certified specialist company. UV-C radiation is dangerous to humans and animals and can damage the skin and/or eyes! Switch off the unit before approaching it! Submersible UV-C lamps must always be completely submerged in water! The seller is not fully liable for any damage caused by improper assembly, improper commissioning or improper operation, but the customer or the installer. Installation or operating instructions are enclosed with the delivery!
- This UVC model ensures crystal clear water.Sophisticated design and high-quality materials result in high UV-C radiation with a wavelength of exactly 253.7 nm. The high dose of radiation destroys almost all bacteria, viruses and even mould, ensuring clear, clean and healthy water. This is a spare parts set (NEW GOODS) Included in delivery are: UV lamp, quartz glass, ballast, stainless steel connectors, instructions The unit is delivered WITHOUT plug. Attention! Important safety instructions! These UV-C lamps do NOT comply with the applicable DIN standards! Therefore the kit is delivered without plug. It must be installed by an experienced and recognised specialist company in accordance with DIN EN60335. Standard protective accessories (safety goggles, gloves, etc.) must be worn during installation, assembly and commissioning. These accessories are NOT included in the kit. Always have the installation carried out by a certified specialist company. UV-C radiation is dangerous to humans and animals and can damage the skin and/or eyes! Switch off the unit before approaching it! Submersible UV-C lamps must always be completely submerged in water! The seller is not fully liable for any damage caused by improper assembly, improper commissioning or improper operation, but the customer or the installer. Installation or operating instructions are enclosed with the delivery!
Function: The new electronic level differential switch WPS3000plus is suitable for automatic level monitoring of conductive liquids in containers, wells, water tanks and the like. The device can be configured either as a refilling device or as an emptying device by means of a slide switch on the front. In this case, the liquid level is automatically maintained between two water sensors (min. and max.). When water enters or reaches a certain level, a relay picks up and switches e.g. mains-operated pumps, valves or warning devices on or off. The WPS 3000plus is suitable for all storage tanks made of concrete, plastic or metal and is quickly installed as all connections are plug-in. Due to the omission of moving float switches, it operates absolutely interference-free. Features: - Switching point freely selectable at any water level via two water sensors- For all storage tanks made of concrete, plastic or metal- Switching output (rel.) configurable as NC or NO (fill/empty) via switch on the front- Remote measurement possible up to 25 m via two-wire cable- Special features: The measuring electrodes are chlorine and salt water resistant (stainless steel AISI 316 / V4A)- No dangerous mains voltage at the water sensor- Operation and monitoring-free- Very simple and quick installation, as ready to plug in- LED displays for mains, sensor min, sensor max, error and rel. on
Glass fibre reinforced polyamide housing, NBR rubber diaphragm, stainless steel core and screws. Pre-pressure 0.4 bar, working pressure 0.4 to 10 bar at 20°C, maximum working temperature + 4°C - + 75°C. Can be mounted in all positions. Working current 2.2 watts, current consumption 185 mA, closed as standard. Coil with bayonet lock and manual operation. All taps are tested!
Cable temperature sensor Temperature sensor - suitable for TS 1000. You need this temperature sensor as an accessory or spare part for the TS 1000.
Function: The TS 1000 temperature controller is ideally suited for all areas of application where temperature control is required in heating or cooling mode. An external temperature sensor records measuring ranges from -99 to +850°C. Features: - For wall mounting- PT1000 temperature sensor (not included)- Switching temperature freely adjustable from -99 ... +850 °C- Min./max. display- Serial interface for reading out measured data (optional)- Operation and monitoring free- Sensor short-circuit and sensor interruption are detected immediately- Output switches off in the event of a sensor error- Adjustable to heating or cooling- LED indicators for relay on, heating (red), cooling (yellow)- Data retention in case of power failure
Single transformer of 220 volts, output: 26 VAC, 600 mA and 15.6 VA. Fits all common irrigation computers.
- Ce produit est uniquement destiné à un usage professionnel. Il s'agit d'un kit de pièces de rechange Le contenu de la livraison est inclus : Lampe UV, verre à quartz, ballast, douille filetée avec AG L'appareil est livré SANS fiche. Attention ! Consignes de sécurité importantes ! Ces UV-C - XClear UVC - AquaForte - Lampes UVC immergées NE SONT PAS conformes aux normes DIN en vigueur ! C'est pourquoi le kit est également livré sans prise. Il doit être installé par une entreprise spécialisée, expérimentée et reconnue, conformément à la norme DIN EN60335. Lors de l'installation, de l'assemblage et de la mise en service, il faut porter des accessoires de protection courants (lunettes de protection, gants, etc.). Ces accessoires ne sont PAS fournis avec le kit. Fais toujours appel à une entreprise spécialisée certifiée pour l'installation. Le rayonnement UV-C est dangereux pour les humains et les animaux et peut endommager la peau et/ou les yeux ! Éteins l'appareil avant de t'en approcher ! Les lampes UV-C d'immersion doivent toujours être complètement immergées dans l'eau ! Le client ou l'installateur, et non le vendeur, est entièrement responsable des dommages causés par un mauvais assemblage, une mauvaise mise en service ou une mauvaise utilisation. Un manuel d'installation ou d'utilisation n'est PAS inclus dans la livraison !
- Ce produit est uniquement destiné à un usage professionnel. Il s'agit d'un kit de pièces de rechange Le contenu de la livraison est inclus : Lampe UV, verre à quartz, ballast, traversée avec AG L'appareil est livré SANS fiche. - Ces lampes peuvent être utilisées dans des réservoirs de filtration, de sorte que l'eau puisse passer sans résistance / perte de pression. - L'extrémité en plastique de la lampe a un diamètre de 32mm, de sorte que tu peux utiliser des colliers de serrage de 32mm (104045) pour monter la lampe dans un réservoir. - Un passage spécial pour réservoir est également disponible pour installer la lampe directement dans le filtre par exemple (voir illustration / 601236) Attention ! Consignes de sécurité importantes ! Ces UV-C - XClear UVC - AquaForte - Lampes UVC immergées NE SONT PAS conformes aux normes DIN en vigueur ! C'est pourquoi le kit est également livré sans fiche. Il doit être installé par une entreprise spécialisée, expérimentée et reconnue, conformément à la norme DIN EN60335. Lors de l'installation, de l'assemblage et de la mise en service, il faut porter des accessoires de protection courants (lunettes de protection, gants, etc.). Ces accessoires ne sont PAS fournis avec le kit. Fais toujours appel à une entreprise spécialisée certifiée pour l'installation. Le rayonnement UV-C est dangereux pour les humains et les animaux et peut endommager la peau et/ou les yeux ! Éteins l'appareil avant de t'en approcher ! Les lampes UV-C d'immersion doivent toujours être complètement immergées dans l'eau ! Le client ou l'installateur, et non le vendeur, est entièrement responsable des dommages causés par un mauvais assemblage, une mauvaise mise en service ou une mauvaise utilisation. Un manuel d'installation ou d'utilisation n'est PAS inclus dans la livraison !
- Ce produit est uniquement destiné à un usage professionnel. - Il s'agit uniquement d'un kit de pièces de rechange. Le contenu de la livraison comprend : Lampe UV, verre de quartz, ballast L'appareil est livré SANS fiche. Attention ! Consignes de sécurité importantes ! Ces UV-C - XClear UVC - AquaForte - Lampes UVC immergées NE SONT PAS conformes aux normes DIN en vigueur ! C'est pourquoi le kit est également livré sans prise. Il doit être installé par une entreprise spécialisée, expérimentée et reconnue, conformément à la norme DIN EN60335. Lors de l'installation, de l'assemblage et de la mise en service, il faut porter des accessoires de protection courants (lunettes de protection, gants, etc.). Ces accessoires ne sont PAS fournis avec le kit. Fais toujours appel à une entreprise spécialisée certifiée pour l'installation. Le rayonnement UV-C est dangereux pour les humains et les animaux et peut endommager la peau et/ou les yeux ! Éteins l'appareil avant de t'en approcher ! Les lampes UV-C d'immersion doivent toujours être complètement immergées dans l'eau ! Le client ou l'installateur, et non le vendeur, est entièrement responsable des dommages causés par un mauvais assemblage, une mauvaise mise en service ou une mauvaise utilisation. Un manuel d'installation ou d'utilisation n'est PAS inclus dans la livraison !
- Ce produit est uniquement destiné à un usage professionnel. - es il s'agit d'un kit de pièces détachées Le contenu est inclus : Lampe UV, verre à quartz, ballast, douille filetée avec AG L'appareil est livré SANS fiche. Attention ! Consignes de sécurité importantes ! Ces UV-C - XClear UVC - AquaForte - Lampes UVC immergées NE SONT PAS conformes aux normes DIN en vigueur ! C'est pourquoi le kit est également livré sans prise. Il doit être installé par une entreprise spécialisée, expérimentée et reconnue, conformément à la norme DIN EN60335. Lors de l'installation, de l'assemblage et de la mise en service, il faut porter des accessoires de protection courants (lunettes de protection, gants, etc.). Ces accessoires ne sont PAS fournis avec le kit. Fais toujours appel à une entreprise spécialisée certifiée pour l'installation. Le rayonnement UV-C est dangereux pour les humains et les animaux et peut endommager la peau et/ou les yeux ! Éteins l'appareil avant de t'en approcher ! Les lampes UV-C d'immersion doivent toujours être complètement immergées dans l'eau ! Le client ou l'installateur, et non le vendeur, est entièrement responsable des dommages causés par un mauvais assemblage, une mauvaise mise en service ou une mauvaise utilisation. Un manuel d'installation ou d'utilisation n'est PAS inclus dans la livraison !
Ersatzteile
Antriebsflansch f. Trommelfilter 35/65/100 (alle Serien)
Antriebswelle für Trommelfilter - alle SerienJe nach Trommelfilter Typ hat die Antriebswelle eine unterschiedliche Länge: Filterbezeichnung Länge Antriebswelle PP25 170 mm PP35 / PP65 162 mm PP100 / PP150 243 mm CF35 / CF65 1340 mm CL25Q 170 mm CL35 / CL65 1245 mm CL35Q / CL65Q 217 mm CF100Q 255 mm TF35 / TF65 / TF100 410 mm
Blindstofen zur Abdichtung für den Notbetrieb eines Trommelfilter.
Deckelschalter f. Trommelfilter 35/65/100 -einzeln
Deckelschalter für Trommelfilter 35/65/100 (kompl. Set)
Dichtung Silikon Trommelfilter 200x10cm 35/65/100 Trommelabdichtung
Ersatzdüse Trommelfilter incl. Halterung 35/65/100
Grüne Platte Trennwand anliegend ohne Simmerring
Halterung für INOX Tauch UVC 40 / 80 W. Für unsere Trommelfilter. Mit 1 Zoll Innengewinde. Lieferumfang: Nur der Halter, die Überwurfmutter dient nur der Veranschaulichung.
Motor 60 W f. Trommelfilter (35er/65er)
Motorplatte zwischen grüner Platte und Motor
Relais GR8-208 - für alte Version der Steuerung (1 Stück/Steuerung)
Schutzkasten für EPS Trommelfilter-SteuerungAbmessungen gesamt: 40 x 29 x 22,5 cm (B x T x H)Die abgebildete Steuerung gehört nicht zum Lieferumfang und dient der symbolischen Abbildung!