Fish Pharma

Fish Pharma Aqua Serum removes toxic substances from tap water. The active ingredients neutralise toxic substances that have entered the water due to poor filtration. Furthermore, the mucous membrane of the fish is protected by colloids and vitamins. As a result, fewer diseases occur. Aqua Serum ensures clear water and reduces foam formation. Application / Dosage:Apply Fish Pharma Aqua Serum when building a new pond, after changing the water and after using medicine. Add 100 ml to 1,000 litres of tap water in the pond.To detoxify and support the mucous membrane: add 20 ml to 1,000 litres of pond water. Repeat the application every fortnight. Ensure good aeration and water circulation! Precautions:Keep out of reach of children.Keep between 4 and 32 degrees Celsius.Use only for ornamental fish in the pond.

Contents: 100 ml stabilised hydrogen peroxide 3% Instructions for use:Rub into the injury or inflammation with a cotton swab. Remove foam to the side. Wounds should then only be sealed with Fish Pharma Propolis or Fish Pharma Wound Gel. Precautionary measures:Wear gloves when using. Avoid contact with human mucous membranes. In case of contact, rinse with water. Store out of the reach of children. Avoid contamination from outside into the bottle, this will reduce the quality of the product.

Instruction: Carbonate hardness (KH) Take a water sample of 5 ml water.Add 1 drop of KH liquid  and shake the test tube. The water sample turns light blue; if it turns yellow, the KH value of the water is below 1 ° DH . Then add 1 drop of KH test liquid at a time and shake the test tube until the water sample turns yellow.The number of drops needed to change the colour from blue to yellow indicates the KH value in ° DH. (Example: 2 drops=2 ° DH , 3 drops=3 ° DH etc.) Instructions: Total hardness (GH) Take a water sample of 5 ml water.Add 5 drops of GH-1 liquid and shake the test tube. The water sample turns dark red to purple.Add 1 droplet of GH-2 liquid and shake the test tube until the water sample turns blue. The number of drops, , that were necessary to change the colour from  dark red / violet to blue indicates the GH value in ° DH. (Example: 2 drops=2 ° DH , 3 drops=3 ° DH etc.) Instruction: Nitrate ( NO3) Take a water sample of 10 ml . Add 5 droplets of NO3-1 test liquid and shake the test tube. Add 5 droplets of NO3-2 test liquid and shake the test tube.Then add 1 measuring spoon of nitrate powder. (tube with the green cap).Shake the test tube for 20 seconds. Wait 15 minutes and then determine the NO3- value of the water using the colour chart.

Instruction: Acidity (pH) Take a water sample of 5 ml.Add 5 droplets of pH test liquid and shake the test tube.Determine the pH value using the colour chart. Instructions: Ammonia water (NH3 & NH4) Take a water sample of 10 ml.Add 5 droplets of NH3-1 test liquid and shake the test tube.Add 5 droplets of NH3-2 test liquid and shake the test tube.Add 5 droplets of NH3-3 test liquid and shake the test tube. Wait 15 minutes and then determine the NH3 value of the water using the colour chart. Instructions: Nitrite (NO2) Take a water sample of 5 ml.Add 5 droplets of NO2 test liquid and shake the test tube.Wait 5 minutes and then determine the NO2 value using the colour chart.