Izumi Phosphamine 5 Kg
Abbildung ähnlich
34,90 €*
Contenuto:
5 kg
(6,98 €* / 1 kg)
Disponibile subito, tempo di consegna 2-3 Tage
Codice prodotto:
711120
With Izumi Phosphamine you bind phosphates sustainably
Izumi Phosphamin 5 KG
Our Izumi Phosphamin binds phosphate permanently and quickly (100 g phosphamin bind approx. 15 g pure phosphate) in your pond water. The phosphate is "coated" and transformed into a non-soluble mineral. This deprives the annoying filamentous and brush algae of their food basis. A positive side effect is the decomposition of pond sludge through the use of our phosphamine.
Special note:
Izumi Phosphamine should not be used in ponds with sturgeon stocking!
| Quantity/Weight: | 1 Kg , 2,5 Kg, 5 Kg, 10 Kg |
|---|
Related products
Water test set for PH / NH3 / No2 / for 3 x 100 tests
62,00 €*
Instruction: Acidity (pH)
Take a water sample of 5 ml.Add 5 droplets of pH test liquid and shake the test tube.Determine the pH value using the colour chart.
Instructions: Ammonia water (NH3 & NH4)
Take a water sample of 10 ml.Add 5 droplets of NH3-1 test liquid and shake the test tube.Add 5 droplets of NH3-2 test liquid and shake the test tube.Add 5 droplets of NH3-3 test liquid and shake the test tube. Wait 15 minutes and then determine the NH3 value of the water using the colour chart.
Instructions: Nitrite (NO2)
Take a water sample of 5 ml.Add 5 droplets of NO2 test liquid and shake the test tube.Wait 5 minutes and then determine the NO2 value using the colour chart.
Water test set for KH - GH - NO3 / 100 tests each
62,00 €*
Instruction: Carbonate hardness (KH)
Take a water sample of 5 ml water.Add 1 drop of KH liquid and shake the test tube. The water sample turns light blue; if it turns yellow, the KH value of the water is below 1 ° DH . Then add 1 drop of KH test liquid at a time and shake the test tube until the water sample turns yellow.The number of drops needed to change the colour from blue to yellow indicates the KH value in ° DH. (Example: 2 drops=2 ° DH , 3 drops=3 ° DH etc.)
Instructions: Total hardness (GH)
Take a water sample of 5 ml water.Add 5 drops of GH-1 liquid and shake the test tube. The water sample turns dark red to purple.Add 1 droplet of GH-2 liquid and shake the test tube until the water sample turns blue. The number of drops, , that were necessary to change the colour from dark red / violet to blue indicates the GH value in ° DH. (Example: 2 drops=2 ° DH , 3 drops=3 ° DH etc.)
Instruction: Nitrate ( NO3)
Take a water sample of 10 ml . Add 5 droplets of NO3-1 test liquid and shake the test tube. Add 5 droplets of NO3-2 test liquid and shake the test tube.Then add 1 measuring spoon of nitrate powder. (tube with the green cap).Shake the test tube for 20 seconds. Wait 15 minutes and then determine the NO3- value of the water using the colour chart.