EPS Combi drum filter CL65 transverse with integrated flushing pump

Innovations

Due to the high demand, we have now designed a CL65 transverse where the inlets and outlets can all be operated from one side (from the front).

This filter is available in 2 versions, one drum on the left and one drum on the right.

Due to this diversity, our CL drum filters can be installed in any filter chamber without any problems.

This filter does not have a baffle for the biomaterial to the outlet.

Function:

The function of the drum filter is to filter polluted water mechanically. Smallest particles are separated from the water by a stainless steel sieve RVS 316 of 75 micrometres and led to the outside via a dirt drain. This filtering process is automatically regulated by a control system and monitored by probes. In the event of a malfunction, the filter automatically switches off the circulation and backwash pump. The water level is constantly monitored by probes. The EPS Combi Drum Filter CL65 is made of very high quality PP plastic and is supplied including control, emergency cover switch, manual channel flushing, complete piping from the flushing pump to the flushing channel, level regulator, cover and built-in flushing pump in an unprecedented price/performance ratio.

All EPS drum filters are reinforced with a 50/50 U-profile and an inner core of 40/40 4 Kant steel pipe.

The direct drive from the motor to the drum eliminates the need for wear parts such as V-belts, toothed belts or plastic gears found in conventional drum filters.

If the dirty water channel should ever become clogged due to strong filamentous algae or leaves, it is no problem to simply dismantle and clean it without having to dismantle the filter drum or remove the mesh.

In the integrated biochamber (105 x 87 x 97 cm), a Japanese air hose (19 mm) is directly pre-installed for a better "moving bed" process for improved turbulence of the HX 13/17. This requires a diaphragm pump of 100-120 L/min. We recommend either HAP series, the Secoh series or the AP series.

Please note the protected and unprotected surface for the HX13/17. Then the square metre of bacteria removal area is calculated.

The CL65 drum filter is available in both pump and gravity versions. Even if you have a gravity version, it is possible to convert it to a pump version in just a few steps (if you need help with this, we will be happy to assist you).

Instructions for the conversion are enclosed with the control box.

The fuse function or the emergency lid switch switches off the immersion UVCs directly when the lid is opened. The function is only guaranteed if they are connected via the supplied control unit.

It is recommended that the electrical connection of the control unit is protected by a residual current circuit breaker.

The control unit should not be directly exposed to moisture.

Suitable connection accessories would be Elastomer sleeve 110mm, Elastomer end caps 110mm (if you do not need all inlets and outlets). As UV lamp we recommend our submersible UVC 40W Amalgan or Immersion UVC 80W Amalgam.

Due to the use of deep well pumps, a flushing process is hardly audible.

Additional options

- different filter panels (filter mesh) in stainless steel RVS available to order and at extra cost in 43µ or 60µ (please note that with finer mesh the flow rate is 30% to 50% lower depending on the µ-thickness)

- our EPS drum filters can be built individually according to drawing at extra charge

- individual biochambers (round or square) as well as trickle filters can be built on request in all sizes according to drawings

Functions of the control system:

- Plug place for circulation and rinsing pump
- Plug and Play via a sensor with measuring pins
- automatic cleaning
- Switch for on/off incl. emergency switch
- Button for manual rinsing
- The rinses are triggered by probes (level of the probes adjustable)
- Rotation time/rinsing time adjustable
- detailed operating instructions are included
- Cleaning is adjustable ( time and duration )
- Dry run protection for the pond pump
- Dry run protection for circulation and rinsing pump
- Connections for probes and safety showers

Why EPS drum filters?

after 30 years of experience and many purchased and self-tested filter systems from different suppliers, we decided to build our own drum filter series.

There are stainless steel, PE and PP drum filters on the market.

Some of the stainless steel filters were notable for their poor workmanship (cheap tank connectors that leaked, broke off or had rust defects).

PE filters caused big problems when exposed to sunlight (bending and warping of the material)

Many drum filters do not have a direct drive and are driven by pinions, V-belts or toothed belts.

The use of salt also became problematic.

In our view, these are all weak points that can lead to malfunctions.

For these reasons, we decided to build PP filters that do not deform, are acid-resistant and are operated with a direct drive.

After an intensive test period of approx. 6 years in our own KOI facility, which consists of approx. 60 tanks of various sizes, with full fish stocking and abundant feeding every day, we started series production.

All these problems are now a thing of the past - We love clear water and healthy fish

EPS drum filters reduce the need for cleaning and maintenance in fish farms and garden ponds to a minimum.

The processing is carried out using the latest technology such as CNC machines, which guarantees quality and precision.

The systems can be used in the koi and/or swimming pond sector as well as in fish farming, industry and public areas.

Dispatch by one-way pallet 220x100x80

You can convince yourself of the quality at any time in our exhibition

We look forward to your visit