EPS drum filter PP100 incl. control, flushing channel with channel flushing and internal flushing pump
€4,650.00*
Available, delivery time: 5 - 7 Tage (10 - 12 Tage bei Versand ins Ausland)
⛏️ From our own production
☝️ 30 years of experience
Maximum flow rate:
Pumped version: approx. 70 m³ / hr.
Technical data:
- Dimensions: 130 x 100 x 98 cm
- Material: PP 10 / 15 / 20 mm and 2 mm stainless steel drum
- Installation height with gravity: 17 cm above water
- Stainless steel sieve in sandwich construction
- Lid with safety shut-off
- Plug and Play via sensor with measuring probes
- Flushing function is triggered by probes, probe level manually adjustable
- Lid switch
- 3x 1/2" internal thread for installation of UVC radiator
- Number of inlets: 10 x 110 mm
- Number of drains: pumped 6 x 110 mm
- Number of drains: gravity 5 x 110 mm
- Dirty water drain: 1 x 110 mm
- Flushing pump: EPS well pump 750 W
- CE mark
- Weight: approx. 106 kg
- Noise level: < 70 db
- Mains voltage: 230V / 50 Hz
- Removable nozzle holder
- Unscrewable flushing channel
- Incl. manual channel flushing. manual gutter flushing with ball valve
- 2x 90 mm drum bypass
- incl. six socket connections
(1x drum motor, 1x flushing pump, 3x pond pump, 1x 230V or UVC)
- direct drive from motor to drum with stainless steel shaft
- stainless steel filter panel
- stainless steel mesh 75 micron RVS 316
- flushing times adjustable
- drive motor 220V 60 W 5 rpm - industrial motor
- maintenance key for specialised trade
- operating instructions as well as control instructions are included
- conversion from gravity to pump version is possible in just a few steps ( conversion instructions in the control box )
- warranty: 2 years (the stainless steel strainer is a wearing part and excluded from the warranty)
Function
The function of the drum filter is to filter polluted water mechanically. Smallest particles are separated from the water by a stainless steel screen RVS 316 of 75 micrometres and led to the outside via a dirt drain. This filtering process is automatically regulated by a control system and monitored by probes. In the event of a malfunction, the filter automatically switches off the circulation and backwash pump. The water level is constantly monitored by a level controller. The EPS PP-100 drum filter is made of very high quality PP plastic and is supplied including control unit, level controller, cover, channel flushing, built-in flushing pump, direct drive and additional sockets for UVC and a second pump in an unprecedented price/performance ratio.
The advantage of the EPS PP-100 is that by turning over a ball valve and pressing the test button "Flush", the gutter flushing is activated and thus cleaned of leaves, thread algae, etc.
The EPS PP-100 drum filter is available in both pump and gravity versions.
If installation is desired, please contact us so that we or one of our partners can respond to your individual wishes.
Suitable connection accessories would be elastomer socket 110mm, elastomer end caps 110mm (if you do not need all inlets and outlets). As UV lamp we recommend our UVC 80W Amalgam.
Additional options
- different filter panels (filter mesh) in stainless steel RVS available on order in 43µ or 60µ (please note that with finer meshes the flow rate is 30% to 50% lower depending on the µ-thickness)
- our EPS drum filters can also be custom-built to different dimensions and pipe connections according to drawings
- control cable, as well as connection cable for 220V (standard 2.5m) can be extended for an extra charge
If you would like individual advice, please feel free to call us on 02945 / 96950
Functions of the control unit:
- Plug location for circulation and rinsing pump
- Plug and Play via sensor with measuring pins
- automatic cleaning
- Switch for on/off incl. emergency switch
- Button for manual flushing
- Flushing is triggered by probes (level of probes adjustable)
- Rotation time/ rinsing time adjustable
- CE mark
- Detailed instructions for use are included
- Cleaning is adjustable ( time and duration )
- Dry-running protection for the pond pump
- Dry-running protection for circulation and rinsing pump
- Connections for sensor and safety switch
Why EPS drum filters?
after 30 years of experience and many purchased and self-tested filter systems from different suppliers, we decided to build our own drum filter series.
There are stainless steel, PE and PP drum filters on the market.
Some of the stainless steel filters were notable for their poor workmanship (cheap tank connectors that leaked, broke off or had rust defects).
PE filters caused big problems when exposed to sunlight (bending and warping of the material)
Many drum filters do not have a direct drive and are driven by pinions, V-belts or toothed belts.
The use of salt also became problematic.
In our view, these are all weak points that can lead to malfunctions.
For these reasons, we decided to build PP filters that do not deform, are acid-resistant and are operated with a direct drive.
After an intensive test period of approx. 6 years in our own KOI facility, which consists of approx. 60 tanks of various sizes, with full fish stocking and abundant feeding every day, we started series production.
All the problems mentioned are now a thing of the past - We love clear water and healthy fish
EPS drum filters reduce the need for cleaning and maintenance in fish farms and garden ponds to a minimum.
The processing is carried out using the latest technology such as CNC machines, which guarantees quality and precision.
The systems can be used in the koi and/or swimming pond sector as well as in fish farming, industry and public areas. The new control system is pre-set in the factory with a water-saving function, whereby the first contact at the probes causes the drum to rotate half a turn without rinsing. At the second contact on the probes, the drum is rotated a full revolution and cleaned completely. This reduces electricity and water consumption.
Dispatch by Euro pallet 140x100x100 cm.
You can convince yourself of the quality at any time in our showroom
We are looking forward to your visit
| Article type: | Drum filter |
|---|
Garantiebedingungen Trommelfilter
Defekte und/oder Störungen infolge falscher Installation, Verwendung und/oder Wartung sind von der Garantie ausgenommen.
Die Garantie verfällt, wenn Reparaturen von Dritten durchgeführt wurden.
Die Garantie verfällt, wenn sich die Verkabelung nicht im Originalzustand befindet.
Garantieansprüche werden nur bearbeitet, wenn das Produkt dem Lieferanten franko, zusammen mit einem gültigen, datierten Kaufbeleg vorgelegt wird.
Der Lieferant haftet nicht für Schäden, einschließlich Folgeschäden, die durch falschen Gebrauch oder den Ausfall des Geräts entstehen.
Ansprüche im Zusammenhang mit Transportschäden am Gerät und/oder seinen Teilen werden nur in Bearbeitung genommen, wenn der Schaden dem Händler innerhalb von 24 Stunden schriftlich gemeldet wird.
Diese Garantiebedingungen beziehen sich auf die von uns angebotenen Serienmodelle.
Auf Sonderbauten, die auf Kundenwunsch gefertigt werden, können wir nur Garantie auf
die verwendeten Materialien – die Funktionsweise kann beeinträchtigt sein.
Zubehör
Ersatzteile
