Kostenloser Versand
Versand innerhalb von 24h
30 Tage Geld-Zurück-Garantie
Bequemer Kauf auf Rechnung
Direkt vom Hersteller
Hotline 0800 123 454 321

EPS Combi Drum Filter CF65 with integrated biochamber + pump chamber

5.890,00 EUR*

Dostupno, vrijeme dostave 5 - 7 Tage (10 - 12 Tage bei Versand ins Ausland)

Version
Broj proizvoda: 406160.2
🇩🇪 Made in Germany
⛏️ From our own production
☝️ 30 years of experience

✔️Latestplain bearing technology
✔️Control& measuring probes
✔️Notausschalterin the cover
✔️Inklusive
✔️InklusiveChannel flushing
✔️Inklusive Integrated pump chamber
✔️CEtested

Maximum flow rate:

Gravity: approx. 65 m³ / hr.
Pumped version: approx. 45 m³ / hr.

Technical data:
- Dimensions: 208 x 97 x 98 cm
- Material: PP 10 / 15 / 20 mm and 2 mm stainless steel drum
- Installation height with gravity: 17 cm above water
- Stainless steel sieve in sandwich construction
- Biochamber with Japanese air hose
- Water volume of the biochamber: approx. 800 L
- Volume of biomedium: approx. 300 - 400 L
- Integrated pump chamber
- Lid with safety shut-off
- Plug and Play via sensor with measuring probes
- Rinsing function is triggered by probes, probe level manually adjustable
- Lid switch
- 2x 1/2" internal thread for installation of UVC lamps
- Number of inlets: 6 x 110 mm
- Number of outlets: Pumped 4 x 110 mm
- Number of outlets: Gravity 3 x 110 mm
- Dirty water outlet: 1 x 110 mm
- Rinsing pump: EPS well pump 750 W
- CE mark
- Weight: approx. 100 kg
- Noise level: < 70 db
- Mains voltage: 230V / 50 Hz
- Removable nozzle holder
- Unscrewable flushing channel
- Incl. manual channel flushing with ball valve
- 2x 90 mm drum bypass
- Incl. six socket connections
(1x drum motor, 1x flushing pump, 3x pond pump, 1x 230V or UVC)
- direct drive from motor to drum with stainless steel shaft
- stainless steel filter panel
- stainless steel mesh 75 micron RVS 316
- flushing times adjustable
- drive motor 220V 60 W 4 rpm  
- maintenance key for specialised trade
- operating instructions as well as control instructions are included
- conversion from gravity to pump version is possible in just a few steps ( conversion instructions in the control box )
- warranty: 2 years (the stainless steel strainer is a wearing part and excluded from the warranty)

Function

Due to the high demand, the CF drum filter was built with an integrated pump chamber, biochamber and integrated flushing pump. This means that this drum filter has a plug and play system. On request, we can equip the filter with an immersion UVC and a pond pump according to your wishes. The function of the drum filter is to filter polluted water mechanically. Smallest particles are separated from the water by a stainless steel screen RVS 316 of 75 micrometres and led to the outside via a dirt drain. This filtering process is automatically regulated by a control system and monitored by probes. In the event of a malfunction, the filter automatically switches off the circulation and backwash pump. The water level is constantly monitored by probes. The EPS Combi Drum Filter CF65 is made of very high quality PP plastic and is supplied including control, emergency cover switch, manual channel flushing, complete piping from the flushing pump to the flushing channel, level regulator, cover and built-in flushing pump in an unprecedented price/performance ratio.

A pump chamber is directly integrated in these filters. With the 100 mm pipe connections facing inwards, either tube pumps or frequency-controlled pumps can be connected inside. This has the advantage that the pumps do not have to be flanged dry on the outside and the energy (heat) is supplied to the water. It is also better for the pumps because they are always cooled and cannot overheat.

All EPS drum filters are reinforced with a 50/50 U-profile and an inner core of 40/40 4 Kant steel pipe.

The direct drive from the motor to the drum means that there are no wear parts as with conventional drum filters (V-belts, toothed belts or plastic gears).

If the waste water channel should ever become clogged due to strong filamentous algae or leaves, it is no problem to simply dismantle and clean it without having to remove the filter drum or the fabric.

In the integrated biochamber (86 x 97 x 98 cm), a Japanese air hose ( 19 mm ) is directly pre-installed for a better "moving bed" process for improved turbulence of the HX 13/17. This requires a diaphragm pump of 100-120 L/min. We recommend either the HAP series, the Secoh series or the AP series.

In addition, the biochamber has been equipped with 8mm slots to insert HX13/17. 

Please note the protected and unprotected surface for the HX13/17. According to this, the square metre of bacteria removal surface is calculated.

The CF65 drum filter is available in both pump and gravity versions. Even if you have a gravity version, it is possible to convert it to a pump version in just a few steps (if you need help with this, we will be happy to assist you).

Instructions for the conversion are enclosed with the control box.

The fuse function or the emergency lid switch switches off the immersion UVCs directly when the lid is opened. The function is only guaranteed if they are connected via the supplied control unit.

It is recommended that the electrical connection of the control unit is protected by a residual current circuit breaker.

The control unit should not be directly exposed to moisture.

Suitable connection accessories would be elastomer sleeve 110mm, elastomer end caps 110mm (if you do not need all inlets and outlets). As UV lamp we recommend our submersible UVC 40W Amalgan or submersible UVC 80W Amalgam.

By using deep well pumps a flushing process is hardly audible.

Additional options

- different filter panels (filter meshes) in stainless steel RVS available on order and at extra charge in 43µ or 60µ (please note that with finer meshes the flow rate is 30% to 50% lower depending on the µ-thickness)

- our EPS drum filters can be built individually on request according to drawings at an extra charge

- individual biochambers (round or square) as well as trickle filters can be built on request in all sizes according to drawings

- if you would like individual advice, please feel free to call us on 02945 / 96950

Functions of the control system:

- Plug location for circulation and rinsing pump

- plug and play via sensor with measuring pins 

- automatic cleaning

- Switch for on/off incl. emergency switch

- Button for manual flushing

- Flushing is triggered by probes (level of probes adjustable)

- Rotation time/flush time adjustable

- CE mark

- detailed instructions for use are included

- Cleaning is adjustable ( time and duration )

- Dry-running protection for the pond pump

- Dry-running protection for circulation and flushing pump

- Connections for sensor and safety switch

Why EPS drum filters?

From 30 years of experience and many purchased and self-tested filter systems from different suppliers, we have decided to build our own drum filter series.

There are stainless steel, PE and PP drum filters on the market.

Some of the stainless steel filters were notable for their poor workmanship (cheap tank connectors that leaked, broke off or had rust defects).

PE filters caused big problems when exposed to sunlight (bending and warping of the material)

Many drum filters do not have a direct drive and are driven by pinions, V-belts or toothed belts.

The use of salt also became problematic.

In our view, these are all weak points that can lead to malfunctions.

For these reasons, we decided to build PP filters that do not deform, are acid-resistant and are operated with a direct drive.

After an intensive test period of approx. 6 years in our own KOI facility, which consists of approx. 60 tanks of various sizes, with full fish stocking and abundant feeding every day, we started series production.

All these problems are now a thing of the past We love clear water and healthy fish

EPS drum filters reduce the need for cleaning and maintenance in fish farms and garden ponds to a minimum.

The processing is done with the most modern technology such as CNC machines, which guarantees quality and precision.

The systems can be used in the koi and/or swimming pond sector as well as in fish farming, industry and public areas.

You can convince yourself of the quality at any time in our exhibition

We look forward to your visit

Article type: Drum filter

Garantiebedingungen Trommelfilter


Der Lieferant gewährt auf Trommelfilter 24 Monate Garantie ab Kaufdatum für Material- und Verarbeitungsfehler. Das Trommelgewebe, das Quarzglas und die UV-C-Lampe sind von der Garantie ausgenommen.

Defekte und/oder Störungen infolge falscher Installation, Verwendung und/oder Wartung sind von der Garantie ausgenommen.

Die Garantie verfällt, wenn Reparaturen von Dritten durchgeführt wurden.

Die Garantie verfällt, wenn sich die Verkabelung nicht im Originalzustand befindet.

Garantieansprüche werden nur bearbeitet, wenn das Produkt dem Lieferanten franko, zusammen mit einem gültigen, datierten Kaufbeleg vorgelegt wird.

Der Lieferant haftet nicht für Schäden, einschließlich Folgeschäden, die durch falschen Gebrauch oder den Ausfall des Geräts entstehen.

Ansprüche im Zusammenhang mit Transportschäden am Gerät und/oder seinen Teilen werden nur in Bearbeitung genommen, wenn der Schaden dem Händler innerhalb von 24 Stunden schriftlich gemeldet wird.

Diese Garantiebedingungen beziehen sich auf die von uns angebotenen Serienmodelle.
Auf Sonderbauten, die auf Kundenwunsch gefertigt werden, können wir nur Garantie auf
die verwendeten Materialien – die Funktionsweise kann beeinträchtigt sein.

Zubehör

Flushing pump for drum filter 750 W - wet installation
This flushing pump in drum filters and  is equipped with a stainless steel pump housing and multi-stage pump drive. Sand-proof up to 50 g/m³ water. With integrated non-return valve, 5 m connection cable and 21 m drain cable. The small outer diameter of only 9.6 cm allows use in narrow drilled wells from a Ø of 10 cm. For pumping water from great depths and transferring it at high pressure. The flow rate of a pump depends mainly on the delivery head. The term 'head' refers to the difference in height between the water surface and the water intake. The table above shows the performance of the flushing pump at different heads. For example, at a delivery head of 20 metres, this pump can be expected to deliver 2,100 litres per hour.

350,00 EUR*
Flushing pump for drum filter TIP GP3000 dry
The TIP GP3000 is ideally suited as a flushing pump in drum filters and is equipped with high-quality stainless steel pump housing. It is a self-priming pump with jet hydraulic system and on/off switch. It is equipped with a maintenance-free condenser motor with thermal overload protection. Flexible locations The TIP GP3000 IS suitable for both mobile use and fixed installation. Wide range of applications  The TIP GP3000 is not only used in the drum filter sector, but is also suitable, for example, for watering or sprinkling gardens, filling and emptying basins or storage tanks, cleaning terraces and pavements. Delivery rate and delivery head 40 m - 150 l/h30 m - 600 l/h20 m - 1,200 l/h10 m - 2,400 l/h The flow rate of a pump depends mainly on the delivery head. The term 'head' refers to the difference in height between the water surface and the water intake. The table above shows the performance of the TIP GP3000 at different heads. For example, at a head of 10 metres, this pump can be expected to deliver 2,400 litres per hour. Maximum number of sprinklers Garden pumps are very suitable for operating irrigation systems - such as sprinklers. This model is suitable for connecting a maximum of 1 sprinkler. This specification is based on the following standard values: Water flow at sprinkler: approx. 600 l/h. Water pressure at sprinkler: approx. 2 bar. Suction height: max. 5 m. The term 'suction height' refers to the difference in height between the water surface and the pump.

129,00 EUR*
Immersion UVC 40 W Stainless Steel Amalgam Kit INOX
- This UVC model ensures crystal clear water.Sophisticated design and high-quality materials result in high UV-C radiation with a wavelength of exactly 253.7 nm. The high dose of radiation destroys almost all bacteria, viruses and even mould, ensuring clear, clean and healthy water.  This is a spare parts set (NEW GOODS) Included in delivery are: UV lamp, quartz glass, ballast, stainless steel connectors, instructions   The unit is delivered WITHOUT plug. Attention! Important safety instructions!  These UV-C lamps do NOT comply with the applicable DIN standards! Therefore the kit is delivered without plug. It must be installed by an experienced and recognised specialist company in accordance with DIN EN60335. Standard protective accessories (safety goggles, gloves, etc.) must be worn during installation, assembly and commissioning. These accessories are NOT included in the kit. Always have the installation carried out by a certified specialist company. UV-C radiation is dangerous to humans and animals and can damage the skin and/or eyes! Switch off the unit before approaching it! Submersible UV-C lamps must always be completely submerged in water! The seller is not fully liable for any damage caused by improper assembly, improper commissioning or improper operation, but the customer or the installer. Installation or operating instructions are enclosed with the delivery!

189,00 EUR*
Immersion UVC 75W T5 - Kit - without plug
- This product is only suitable for professional use. - This is only a spare parts set. The scope of delivery includes: UV lamp, quartz glass, ballast unit The unit is supplied WITHOUT plug. Attention! Important safety instructions!  These UV-C - XClear UVC - AquaForte - Submersible UVC lamps do NOT comply with the applicable DIN standards! Therefore the kit is delivered without plug. It must be installed by an experienced and recognised specialist company in accordance with DIN EN60335. Standard protective accessories (safety goggles, gloves, etc.) must be worn during installation, assembly and commissioning. These accessories are NOT included in the kit. Always have the installation carried out by a certified specialist company. UV-C radiation is dangerous for humans and animals and can damage the skin and/or eyes! Switch off the unit before approaching it! Submersible UV-C lamps must always be completely submerged in water! The seller is not fully liable for any damage caused by improper assembly, improper commissioning or improper operation, but the customer or the installer. Installation or operating instructions are NOT enclosed with the delivery!

189,00 EUR*
Immersion UVC 80 W Stainless Steel Amalgam Kit INOX UVC
- This UVC model ensures crystal clear water.Sophisticated design and high-quality materials result in high UV-C radiation with a wavelength of exactly 253.7 nm. The high dose of radiation destroys almost all bacteria, viruses and even mould, ensuring clear, clean and healthy water.  This is a spare parts set (NEW GOODS) Included in delivery are: UV lamp, quartz glass, ballast, stainless steel connectors, instructions   The unit is delivered WITHOUT plug. Attention! Important safety instructions!  These UV-C lamps do NOT comply with the applicable DIN standards! Therefore the kit is delivered without plug. It must be installed by an experienced and recognised specialist company in accordance with DIN EN60335. Standard protective accessories (safety goggles, gloves, etc.) must be worn during installation, assembly and commissioning. These accessories are NOT included in the kit. Always have the installation carried out by a certified specialist company. UV-C radiation is dangerous to humans and animals and can damage the skin and/or eyes! Switch off the unit before approaching it! Submersible UV-C lamps must always be completely submerged in water! The seller is not fully liable for any damage caused by improper assembly, improper commissioning or improper operation, but the customer or the installer. Installation or operating instructions are enclosed with the delivery!

209,00 EUR*
Immersion UVC 80W Amalgam Kit - without plug
- This product is only suitable for professional use. - it  is a spare parts set Included in delivery are: UV lamp, quartz glass, ballast unit, threaded bushing with AG The unit is supplied WITHOUT plug. Attention! Important safety instructions!  These UV-C - XClear UVC - AquaForte - Submersible UVC lamps do NOT comply with the applicable DIN standards! Therefore the kit is delivered without plug. It must be installed by an experienced and recognised specialist company in accordance with DIN EN60335. Standard protective accessories (safety goggles, gloves, etc.) must be worn during installation, assembly and commissioning. These accessories are NOT included in the kit. Always have the installation carried out by a certified specialist company. UV-C radiation is dangerous to humans and animals and can damage the skin and/or eyes! Switch off the unit before approaching it! Submersible UV-C lamps must always be completely submerged in water! The seller is not fully liable for any damage caused by improper assembly, improper commissioning or improper operation, but the customer or the installer. Installation or operating instructions are NOT enclosed with the delivery!

259,00 EUR*
Level controller WPS 3000 plus - Water level indicator, level indicator
Function: The new electronic level differential switch WPS3000plus is suitable for automatic level monitoring of conductive liquids in containers, wells, water tanks and the like. The device can be configured either as a refilling device or as an emptying device by means of a slide switch on the front. In this case, the liquid level is automatically maintained between two water sensors (min. and max.). When water enters or reaches a certain level, a relay picks up and switches e.g. mains-operated pumps, valves or warning devices on or off. The WPS 3000plus is suitable for all storage tanks made of concrete, plastic or metal and is quickly installed as all connections are plug-in. Due to the omission of moving float switches, it operates absolutely interference-free. Features: - Switching point freely selectable at any water level via two water sensors- For all storage tanks made of concrete, plastic or metal- Switching output (rel.) configurable as NC or NO (fill/empty) via switch on the front- Remote measurement possible up to 25 m via two-wire cable- Special features: The measuring electrodes are chlorine and salt water resistant (stainless steel AISI 316 / V4A)- No dangerous mains voltage at the water sensor- Operation and monitoring-free- Very simple and quick installation, as ready to plug in- LED displays for mains, sensor min, sensor max, error and rel. on

74,95 EUR*
RPE solenoid valve 3/4 inch
Glass fibre reinforced polyamide housing, NBR rubber diaphragm, stainless steel core and screws. Pre-pressure 0.4 bar, working pressure 0.4 to 10 bar at 20°C, maximum working temperature + 4°C - + 75°C. Can be mounted in all positions. Working current 2.2 watts, current consumption 185 mA, closed as standard. Coil with bayonet lock and manual operation. All taps are tested!

39,95 EUR*
Submersible UVC 40W Amalgam kit - without plug
- This product is only suitable for professional use. This is a spare parts set Included in the scope of delivery are: UV lamp, quartz glass, ballast unit, threaded bushing with AG   The unit is supplied WITHOUT plug. Attention! Important safety instructions!  These UV-C - XClear UVC - AquaForte - Submersible UVC lamps do NOT comply with the applicable DIN standards! Therefore the kit is delivered without plug. It must be installed by an experienced and recognised specialist company in accordance with DIN EN60335. Standard protective accessories (safety goggles, gloves, etc.) must be worn during installation, assembly and commissioning. These accessories are NOT included in the kit. Always have the installation carried out by a certified specialist company. UV-C radiation is dangerous to humans and animals and can damage the skin and/or eyes! Switch off the unit before approaching it! Submersible UV-C lamps must always be completely submerged in water! The seller is not fully liable for any damage caused by improper assembly, improper commissioning or improper operation, but the customer or the installer. Installation or operating instructions are NOT enclosed with the delivery!

259,00 EUR*
Submersible UVC 40W T5 kit - without plug
- This product is only suitable for professional use. This is a spare parts set Included in the scope of delivery are: UV lamp, quartz glass, ballast unit, bushing with AG The unit is supplied WITHOUT plug. - These lamps can be used in filter tanks so that the water can flow through without resistance / pressure loss. - The plastic end of the lamp has a diameter of 32mm, so you can use 32mm pipe clamps (104045) to mount the lamp in a tank. - A special tank feed-through is also available to install the lamp directly e.g. in the filter (see illustration / 601236) Attention! Important safety instructions!  These UV-C - XClear UVC - AquaForte - Submersible UVC lamps do NOT comply with the applicable DIN standards! Therefore the kit is delivered without plug. It must be installed by an experienced and recognised specialist company in accordance with DIN EN60335. Standard protective accessories (safety goggles, gloves, etc.) must be worn during installation, assembly and commissioning. These accessories are NOT included in the kit. Always have the installation carried out by a certified specialist company. UV-C radiation is dangerous to humans and animals and can damage the skin and/or eyes! Switch off the unit before approaching it! Submersible UV-C lamps must always be completely submerged in water! The seller is not fully liable for any damage caused by improper assembly, improper commissioning or improper operation, but the customer or the installer. Installation or operating instructions are NOT enclosed with the delivery!

185,00 EUR*
Temperature sensor Temperature sensor TS3 PT 1000
Cable temperature sensor Temperature sensor - suitable for TS 1000. You need this temperature sensor as an accessory or spare part for the TS 1000.   

24,50 EUR*
Temperature switch TS 1000 for PT 1000 sensor
Function: The TS 1000 temperature controller is ideally suited for all areas of application where temperature control is required in heating or cooling mode. An external temperature sensor records measuring ranges from -99 to +850°C. Features: - For wall mounting- PT1000 temperature sensor (not included)- Switching temperature freely adjustable from -99 ... +850 °C- Min./max. display- Serial interface for reading out measured data (optional)- Operation and monitoring free- Sensor short-circuit and sensor interruption are detected immediately- Output switches off in the event of a sensor error- Adjustable to heating or cooling- LED indicators for relay on, heating (red), cooling (yellow)- Data retention in case of power failure

64,95 EUR*
Transformer Transformer 24VAC
Single transformer of 220 volts, output: 26 VAC, 600 mA and 15.6 VA. Fits all common irrigation computers.

49,95 EUR*

Ersatzteile

Antriebswelle f. Trommelfilter
Antriebswelle für Trommelfilter - alle SerienJe nach Trommelfilter Typ hat die Antriebswelle eine unterschiedliche Länge: Filterbezeichnung Länge Antriebswelle PP25 170 mm PP35 / PP65 162 mm PP100 / PP150 243 mm CF35 / CF65 1340 mm CL25Q 170 mm CL35 / CL65 1245 mm CL35Q / CL65Q 217 mm CF100Q 255 mm TF35 / TF65 / TF100 410 mm

49,90 EUR*
Blindstofen für Notbetrieb Trommelfilter
Blindstofen zur Abdichtung für den Notbetrieb eines Trommelfilter.

9,50 EUR*
Deckelschalter f. Trommelfilter 35/65/100 -einzeln
Deckelschalter f. Trommelfilter 35/65/100 -einzeln

60,00 EUR*
Deckelschalter für Trommelfilter 35/65/100 (kompl. Set)
Deckelschalter für Trommelfilter 35/65/100 (kompl. Set)

139,00 EUR*
Dichtung Silikon Trommelfilter 200x10cm 35/65/100
Dichtung Silikon Trommelfilter 200x10cm 35/65/100 Trommelabdichtung

69,00 EUR*
Ersatzdüse Trommelfilter incl. Halterung 35/65/100
Ersatzdüse Trommelfilter incl. Halterung 35/65/100

39,50 EUR*
Gehäuse für Trommelfilter-Steuerung
Gehäuse für Trommelfilter-Steuerung

39,50 EUR*
Grüne Platte Trennwand anliegend ohne Simmerring
Grüne Platte Trennwand anliegend ohne Simmerring

39,50 EUR*
Halbmond f. Antriebswelle
Halbmond / Sicherungskeil für Antriebswelle.

2,50 EUR*
Laufrolle 100er Hinten
Laufrolle für Trommelfilter 100er Serie Hinten.

28,90 EUR*
Luft Anschluss 1" für Trommelfilter
Luft Anschluss 1" für Trommelfilter

28,50 EUR*
Motor 60 W f. Trommelfilter (35er/65er)
Motor 60 W f. Trommelfilter (35er/65er)

525,00 EUR*
Motor 90 W f. Trommelfilter (100er)
Motor 90 W f. Trommelfilter (100er)

579,00 EUR*
Motorabdeckung
Abdeckung für Trommelfilter Motor.

39,50 EUR*
Motorplatte zwischen grüner Platte und Motor
Motorplatte zwischen grüner Platte und Motor

25,00 EUR*
Relais GR8-116 (2 Stück/Steuerung)
Relais GR8-116 (2 Stück/Steuerung)

42,00 EUR*
Relais GR8-208 - für alte Version der Steuerung (1 Stück/Steuerung)
Relais GR8-208 - für alte Version der Steuerung (1 Stück/Steuerung)

42,00 EUR*
Relais GRL8-01 (1 Stück/Steuerung)
Relais GRL8-01 (1 Stück/Steuerung)

49,00 EUR*
Relais GRL8-02 (2 Stück/Steuerung)
Relais GRL8-02 (2 Stück/Steuerung)

49,00 EUR*
Relais GRT8-M1 (1 Stück/Steuerung)
Relais GRT8-M1 (1 Stück/Steuerung)

49,00 EUR*
Sensor- / Poti-Einheit für EPS Trommelfilter
Sensor- / Poti-Einheit für EPS Trommelfilter

115,00 EUR*
Servicestecker f. Trommelfilter-Steuerung
Servicestecker f. Trommelfilter-Steuerung

60,00 EUR*
Simmerring für Motorplatte Trommelfilter 35/65/100
Simmerring für Motorplatte Trommelfilter 35/65/100

29,00 EUR*
Steuerung für Trommelfilter 25/35/65/100/150
Steuerung für Trommelfilter 25/35/65/100/150Funktionen der Steuerung:Steckerplatz für Umwälz- und SpülpumpePlug and Play über einen Sensor mit Messstiftenautomatische ReinigungHauptschalter für Ein-/Aus Taste für manuelles SpülenDie Spülungen werden durch Sonden ausgelöst (Niveau der Sonden verstellbar)CE ZeichenTrockenlaufschutz für die TeichpumpeTrockenlaufschutz für Umwälz- und SpülpumpeAnschlüsse für Fühler und SicherheitsschalterJede Anschlussdose separat gesichertLED´s leuchten bei Ansteuerung des Anschlusses

675,00 EUR*