EPS Combi Drum Filter CL65 Jumbo with integrated flushing pump

5 190,00 €*

Immédiatement disponible, délai de livraison 10-14 Tage (bei Versand ins In- und Ausland)

Version

Gravity version

Pump version

Réf. produit : 406140.1

🇩🇪 Manufactured in Germany
⛏️ From our own production
☝️ 30 years of experience

✔️Latestplain bearing technology
✔️Controls& Measuring probes
✔️Emergency stop switchin lid
✔️Includes2-piece lid
✔️Includesgutter flushing
✔️CEtested
✔️IntegratedJapan air hose 19 mm

You will find all further info in the features and description.

Function

The function of the drum filter is to filter polluted water mechanically. Smallest particles are separated from the water by a stainless steel sieve RVS 316 of 75 micrometres and led to the outside via a dirt drain. This filtering process is automatically regulated by a control system and monitored by probes. In the event of a malfunction, the filter automatically switches off the circulation and backwash pump. The water level is constantly monitored by probes. The EPS Combi Drum Filter CL65 is made of very high quality PP plastic and is supplied including control, emergency cover switch, manual channel flushing, complete piping from the flushing pump to the flushing channel, level control, cover and built-in flushing pump in an unprecedented price/performance ratio.

All EPS drum filters are reinforced with a 50/50 U-profile and an inner core of 40/40 4 Kant steel pipe.

The direct drive from the motor to the drum eliminates the need for wear parts such as V-belts, toothed belts or plastic gears found in conventional drum filters.

If the dirty water channel should ever become clogged due to strong filamentous algae or leaves, it is no problem to simply dismantle and clean it without having to dismantle the filter drum or remove the mesh.

In the integrated biochamber (102 x 98 x 97 cm), a Japanese air hose (19 mm) is directly pre-installed for a better "moving bed" process for improved turbulence of the HX 13/17. This requires a diaphragm pump of 100-120 L/min. We recommend either HAP series, the Secoh series or the AP series.

In addition, the biochamber has been equipped with 8mm slots to insert HX13/17.

Please note the protected and unprotected surface of the HX13/17. According to this, the square metre of bacteria removal surface is calculated.

The CL65 drum filter is available in both pump and gravity versions. Even if you have a gravity version, it is possible to convert it to a pump version in just a few steps (if you need help with this, we will be happy to assist you).

Instructions for the conversion are enclosed with the control box.

The fuse function or the emergency lid switch switches off the immersion UVCs directly when the lid is opened. The function is only guaranteed if they are connected via the supplied control unit.

It is recommended that the electrical connection of the control unit is protected by a residual current circuit breaker.

The control unit should not be directly exposed to moisture.

Suitable connection accessories would be Elastomer sleeve 110mm, Elastomer end caps 110mm (if you do not need all inlets and outlets). As UV lamp we recommend our submersible UVC 40W Amalgan or Immersion UVC 80W Amalgam.

Due to the use of deep well pumps, a flushing process is hardly audible.

Additional options

- different filter panels (filter mesh) in stainless steel RVS available to order and at extra cost in 43µ or 60µ (please note that with finer mesh the flow rate is 30% to 50% lower depending on the µ-thickness)

- our EPS drum filters can be built individually on request according to drawings at an extra charge

- individual biochambers (round or square) as well as trickle filters can be built on request in all sizes according to drawing

- if you would like individual advice, please feel free to call us on 02945 / 96950

Functions of the control system:

- Plug place for circulation and rinsing pump

- plug and play via sensor with measuring pins

- automatic cleaning

- Switch for on/off incl. emergency switch

- Button for manual flushing

- Flushing is triggered by probes (level of probes adjustable)

- Rotation time/flush time adjustable

- CE mark

- detailed instructions for use are included

- Cleaning is adjustable ( time and duration )

- Dry-running protection for the pond pump

- Dry-running protection for circulation and flushing pump

- Connections for sensor and safety switch

Why EPS drum filters?

after 30 years of experience and many purchased and self-tested filter systems from different suppliers, we decided to build our own drum filter series.

There are stainless steel, PE and PP drum filters on the market.

Some of the stainless steel filters were notable for their poor workmanship (cheap tank connectors that leaked, broke off or had rust defects).

PE filters caused big problems when exposed to sunlight (bending and warping of the material)

Many drum filters do not have a direct drive and are driven by pinions, V-belts or toothed belts.

The use of salt also became problematic.

In our view, these are all weak points that can lead to malfunctions.

For these reasons, we decided to build PP filters that do not deform, are acid-resistant and are operated with a direct drive.

After an intensive test period of approx. 1.5 years in our own KOI facility, which consists of approx. 60 tanks of various sizes, with full fish stocking and abundant feeding every day, we started series production.

All these problems are now a thing of the past - We love clear water and healthy fish

EPS drum filters reduce the need for cleaning and maintenance in fish farms and garden ponds to a minimum.

The processing is carried out using the latest technology such as CNC machines, which guarantees quality and precision.

The systems can be used in the koi and/or swimming pond sector as well as in fish farming, industry and public areas.

Dispatch by one-way pallet 220x100x80

Technical data:
EPS Combi Drum Filter CL65

NEW: Water saving function via the intelligent control

- the new control is pre-set with a water saving function ex works, whereby the first contact at the probes causes the drum to rotate half a turn without rinsing. At the second contact on the probes, the drum is rotated a full revolution and cleaned completely. This reduces electricity and water consumption- maximum flow rate with gravity: 65 m³ / hr. (with pumped version -30% pump capacity)

- Dimensions: 205 x 97 x 98 cm
- Material: PP 10 - 15mm and 2 mm stainless steel drum
- Installation height with gravity: 13 cm above water
- Water volume biochamber: approx. 970 L
- Volume biomedium: approx. 350 - 450 L
- Number of inlets: 6 x 110 mm
- Number of outlets: 7 x 110 mm
- Dirty water outlet: 1 x 110 mm
- Flushing pump: EPS750
- Weight: approx. 100 kg
- Noise level: < 70 db
- Mains voltage: 230V / 50 Hz
- Removable nozzle assembly
- Unscrewable flushing channel
- Incl. manual channel flushing with ball valve
- 2x 90 mm drum bypass
- Incl. six sockets (1x drum motor, 1x flushing pump, 3x pond pump, 1x 230V for second pond pump or UVC)
- Direct drive from motor to drum
- Built-in Japanese 19mm air hose for better movement of the biomedium (Helix)
- Connection for air hose 20 mm (other sizes individually possible)
- Stainless steel filter panel
- Stainless steel mesh 75 micron RVS 316
- Flushing times adjustable
- Drive motor 220V 50NM
- Incl. Emergency cover switch
- incl. control unit and measuring probes
- maintenance key for specialised trade
- cover in 2 parts is part of the delivery
- operating instructions as well as control unit instructions are included in the delivery
- conversion from gravity to pump version is possible in just a few steps ( conversion instructions in the control unit box )
- guarantee: 2 years (the stainless steel sieve is a wearing part and excluded from the guarantee)
- payment by instalments via PayPal possible

You can convince yourself of the quality at any time in our showroom

We look forward to your visit

Zubehör

Embout flexible en élastomère

Les raccords flexibles offrent de nombreux avantages pour les connexions entre les canalisations en PVC et, en particulier, pour les connexions entre les canalisations en PVC et les matériaux qui ne collent pas ou mal, comme l'acier inoxydable, le PP, le PE, le béton et le polyester. En outre, les raccords flexibles sont très bien adaptés aux transitions entre les dimensions métriques et les dimensions anglaises/américaines des conduitesLes raccords sont très flexibles et donc bien utilisables lorsque les conduites ne sont pas exactement adaptées les unes aux autres. Les raccords flexibles peuvent également être montés et démontés très rapidement lors de changements de système, d'installations d'essai ou d'installations temporaires, sans avoir besoin de coller les connexions, ce qui demande beaucoup de travail et n'est pas sainLes raccords flexibles permettent de relier des conduites même à des températures inférieures au point de congélation, où le collage n'est pas possible. Dans de nombreux cas, il est également possible d'effectuer une réparation (d'urgence) rapide avec des raccords flexibles en cas de tuyaux cassés (par exemple par le gel). Outre la facilité de montage des tuyaux, la flexibilité des pièces en plastique offre l'avantage supplémentaire d'amortir les vibrations (des pompes par exemple). Ils contribuent ainsi à éviter les ruptures de tension dans les tuyaux en PVCLes avantages - connexion rapide sans collage- élimine les tensions dans les tuyaux- connexion facile du PVC avec le PE, le PP, l'acier inoxydable, la fonte, le béton, etc-passage facile du métrique au pouce- amortit les vibrations dans les tuyaux- pas de vapeurs nocives de colle/solvant- Montage possible en cas de gel- facilement démontable et réutilisable- réparation d'urgence facile de la tuyauterie- pour relier des éléments qui ne sont pas exactement adaptés les uns aux autres

De 3,50 €*

Détails

Helix HXF 17 KLL - noir - 595 m² de surface - Ø:17mm

Une hélice périphérique, avec des lamelles orientées vers l'intérieur, caractérise la construction judicieuse. Elle réduit les ombres d'écoulement, augmente l'efficacité et augmente la part de surface protégée pour les corps flottants avec une faible résistance à l'écoulement. Les grandes ouvertures de ce matériau filtrant permettent des flux de passage élevés et offrent une surface maximale pour la formation de la biologie. Ces caractéristiques rendent ce matériau filtrant intéressant pour tous les filtres de bassin à koï. Parfait LIT FIXE, pour les chambres, les biotowers, les filtres à ruissellement, et les procédés "moving bed".

De 49,90 €*

Détails

Immersion UVC 40 W Stainless Steel Amalgam Kit INOX

- This UVC model ensures crystal clear water.Sophisticated design and high-quality materials result in high UV-C radiation with a wavelength of exactly 253.7 nm. The high dose of radiation destroys almost all bacteria, viruses and even mould, ensuring clear, clean and healthy water. This is a spare parts set (NEW GOODS) Included in delivery are: UV lamp, quartz glass, ballast, stainless steel connectors, instructions The unit is delivered WITHOUT plug. Attention! Important safety instructions! These UV-C lamps do NOT comply with the applicable DIN standards! Therefore the kit is delivered without plug. It must be installed by an experienced and recognised specialist company in accordance with DIN EN60335. Standard protective accessories (safety goggles, gloves, etc.) must be worn during installation, assembly and commissioning. These accessories are NOT included in the kit. Always have the installation carried out by a certified specialist company. UV-C radiation is dangerous to humans and animals and can damage the skin and/or eyes! Switch off the unit before approaching it! Submersible UV-C lamps must always be completely submerged in water! The seller is not fully liable for any damage caused by improper assembly, improper commissioning or improper operation, but the customer or the installer. Installation or operating instructions are enclosed with the delivery!

189,00 €*

Immersion UVC 80 W Stainless Steel Amalgam Kit INOX UVC

209,00 €*

Manchon de réduction flexible en élastomère

Les raccords flexibles offrent de nombreux avantages pour les connexions entre les canalisations en PVC et, en particulier, pour les connexions entre les canalisations en PVC et les matériaux qui ne collent pas ou mal, comme l'acier inoxydable, le PP, le PE, le béton et le polyester. En outre, les raccords flexibles sont très bien adaptés aux transitions entre les dimensions métriques et les dimensions anglaises/américaines des conduites. Les raccords sont très flexibles et donc bien utilisables lorsque les conduites ne sont pas exactement adaptées les unes aux autres. Les raccords flexibles peuvent également être montés et démontés très rapidement lors de changements de système, d'installations d'essai ou d'installations temporaires, sans avoir besoin de coller les connexions, ce qui demande beaucoup de travail et n'est pas sain. Les raccords flexibles permettent de relier des conduites même à des températures inférieures au point de congélation, où le collage n'est pas possible. Dans de nombreux cas, il est également possible d'effectuer une réparation (d'urgence) rapide avec des raccords flexibles en cas de tuyaux cassés (par exemple par le gel). Outre la facilité de montage des tuyaux, la flexibilité des pièces en plastique offre l'avantage supplémentaire d'amortir les vibrations (des pompes par exemple). Ils contribuent ainsi à éviter les ruptures de tension dans les tuyaux en PVC.Les avantages :- connexion rapide sans collage- élimine les tensions dans les tuyaux- connexion facile du PVC avec le PE, le PP, l'acier inoxydable, la fonte, le béton, etc.-passage facile du métrique au pouce- amortit les vibrations dans les tuyaux- pas de vapeurs nocives de colle/solvant- Montage possible en cas de gel- facilement démontable et réutilisable- réparation d'urgence facile de la tuyauterie- pour relier des éléments qui ne sont pas exactement adaptés les uns aux autres

De 5,60 €*

Détails

Pond pump Aquariolux EASY 40000 l/h with digital control

Technical data: - Dry-running protection- low energy consumption- for fresh and salt water- also suitable for dry installation (inlet must be below water level, as not self-priming!).- can pump dirt particles up to 6 mm- Voltage: 220-240 V 50 Hz- Pmax.: 360 watts- Threaded connection: 2.5"/2.5"- Hose connection 3/4", 1", 1 1/4", 1 1/2"- Qmax: 40,000 L/h- Hmax: 9 m- with 6m rubber cable and waterproof controller box- Dimensions: 240 mm x 390 mm x 216 mm- Weight: 7.0 kg

379,95 €*

Pond pump EASY 20000 l/h with digital control

Technical data: - Dry-running protection- low energy consumption- for fresh and salt water- also suitable for dry installation (inlet must be below water level, as not self-priming!).- can pump dirt particles up to 6 mm.- Voltage: 220-240 V 50 Hz- Pmax.: 200 Watt- Threaded connection: 2"/2"- Hose connection 3/4", 1", 1 1/4", 1 1/2"- Qmax: 20,000 L/h- Hmax: 8 m- with 6m rubber cable and waterproof controller box- Dimensions: 185 mm x 330 mm x 190 mm- Weight: 4.725 kg

249,95 €*

Pond pump OSE 22000VX Variomatix

Pond filter and circulation pump with stainless steel suction strainer controllable with sine wave frequency converterThe controller works steplessly and thus enables very fine control behaviour as well as absolutely smooth motor running. The motors of the pumps are protected because this technology eliminates bearing currents. The delivery rate is adjustable from approx. 30 % to 100 %. The power consumption is between approx. 40 % and 100 % of the nominal power.Dirt particles up to Ø 8 mm are pumped. The pumps are suitable for freshwater and seawater. By means of a wired external remote control unit (controller), the pump is switched on or off and the pumping capacity (motor power and power consumption) is infinitely variable.In the event of a power failure, the last values stored in the controller are retained.

299,00 €*